The installation of a rush ceiling in the bathroom, in the kitchen or in another room with high humidity is a very reasonable solution, because in such conditions no other finish will be as long as durable.

In addition, the suspension design will have a perfectly smooth surface and allow you to place stylish built-in lamps.

We offer the reader to get acquainted with the technology of the installation of the robber ceiling in the bathroom, which, as he can make sure it does not represent difficulties even for a beginner.

First of all, you need to decide what the ceiling will be.

Aluminum rails are produced in a rather diverse performance:

  1. Color. A wide range is available - from the usual matte white to golden.
  2. The form.
  3. The size.
  4. The presence of perforation. Provides ventilation of the space between the slats and the slab of the overlap.

The form distinguishes three varieties of rails:

  • classic rectangular shape without rounds (they are called "German");
  • with rounded corners (Italian ");
  • with a special form ("designer"): usually somewhat more complex in the installation.

The length of the rail (standard range - 2.5, 3, 4 and 6 m) must be selected taking into account the size of the bathroom so that the cropping remains as small as possible.

Aluminum Rush Suspended Ceilings

In the width of the panel are divided into:

  • wide (25 - 30 cm): do not have visually distinguishing elements, so the surface of the ceiling looks solid;
  • narrow (85, 100, 150 mm): They have clear edges, due to which the boundaries of each rail after installation are clearly visible.

In addition, there can be a variety of inserts between narrow rails that make the design design more spectacular.

If aluminum rails seem too expensive, you can purchase more accessible steel or PVC panels.

What is needed for installation?

In addition to the Rosek, the wizard will need some other items as well as tools. But first you need to answer the question: when exactly start to install?

Time Selection To Set the Design

A positive feature of the cutting ceiling is that its installation does not apply to any "wet" processes or dirty in general. Consequently, it is possible to engage in its device at the very end of the repair epic.

Such a tactic quite consistent with the generally accepted order of internal finishing works: usually start from the floor and moving upwards, ending with the ceiling.

Necessary materials and tools

In addition to the panels will need to be purchased:

  • guides (metal strips with a special profile);
  • traverts (elements to which rakes will be attached);
  • the suspensions for the traverse (in the amount of 2 - 3 per traverter);
  • dowels and selflessness.

The total length of the traverse is determined based on the fact that they will be installed in 1 - 1.2 m increments.

All materials, as always, should be purchased with some reserve: it will be needed if some elements are inadequately spoiled during installation, as well as in case of replacing damaged elements in the future.

You also need to take care of the presence of such tools:

  • level: It is better to take not bubble, but water (two glass tubes connected by a long rubber);
  • markup tool: marker, cord;
  • perforator;
  • screwdriver or screwdriver;
  • construction knife (if the PVC panels are used);
  • scissors for metal;
  • roulette.

By the beginning of the installation in the sub-combine space should be divorced wires for powering lamps. They must be laid in pipes or corrugated sleeves from metal or self-refining plastic (PUE requirement).

Installation of guides around the perimeter

The work begins with attachment to the walls of the guides, which will simultaneously serve as a decorative frame of the ceiling canvase. All of them must be located:

  • strictly horizontally;
  • at a distance of about 10 cm from the slab overlap.

The second paragraph is of a letter of recommendation: 10 cm is the optimal value that will not greatly reduce the height of the room and at the same time will allow you to place all the electrics and lamps without difficulty.

If necessary, it can be adjusted to any side.

How to achieve a strict horizontal position of the guides? It does not make sense to sleep equal distances from the capital ceiling - there is no guarantee that the stove itself lies strictly in the horizontal plane. You can "dance" from the floor, as it is always leveling in terms of level.

But the most reliable way is to make marks using a water level. The use of this tool eliminates any error that would have a place when disintegrating the distance with the roulette or the use of a laser bubble type.

Made of marks connect with straight lines, beaten with a stretched cord, after which we screw the guides along the dowels along the dowels. The fastener installation step is 40 cm.

Raking Ceiling Mounting Scheme

If the guides are attached on top of the tile facing, it is very desirable to avoid hitting the fastening holes in the seams between the tiles. If, after all, I had to face, the hole should be sewed with a special drill for ceramics and without perforation mode.

If the metal bar needs to be cut, it is possible to do it with scissors for metal.

In the corners of the guides are inserted one to another.

Among the suspended ceiling systems are chosen due to the relative ease of installation and aesthetic design.

About how to bother the ceiling in the bathroom correctly, you can read.

Plasterboard - material from which you can create an interesting decorative ceiling in the bathroom. You can read about the features of the plasterboard ceilings.

Installation of suspensions and traverse

This stage of installation of aluminum ceiling is performed in this order:

  1. On the slab overlap, you beat off straight lines perpendicular to the direction of the rails in the future suspended ceiling. The distance between the lines is 1 - 1.2 m, at the same distance the first and the last of them must be defeated from the nearest walls. This markup to install traverse.
  2. Along every line, uniformly set 2 - 3 suspensions, screwing them to the slab overlap with two dowels. Fixing the suspension, both of its "legs" need to beaten down.
  3. Between the upper edges standing opposite each other of the guides previously screwed to the walls, stretch the cord or thread to indicate the horizontal plane.
  4. We establish traverses, having them between the "legs" of the suspensions at the desired height and screw to them with self-draws. Traverses must lie along the plane indicated by strained threads. Thus, they will turn out to be installed on the perimeter of the placement guides. In the length, each traverse must be almost from the wall to the wall (left small gaps). It can be made up of several short slats, securing each of them on its own suspension and engaged in each other.

The ends of the "legs" of the suspensions below the traverse fell up (they would interfere with the racks).

Assembling ceiling

So, consider how to collect and mount the cam ceiling. The sequence of actions is as follows:

  1. A protective film is removed from the rivers. It is necessary to do this at the last moment to exclude damage due to careless actions of the edges or decorative coating.
  2. Cut off with a building knife (PVC rail) or scissors for metal (aluminum) fragment of the desired length.
  3. If the lamp will be installed in this panel, it needs to cut a round hole: the circle is drawn, several small holes are drilled along it. The gaps between the holes are cut, after which the edge of the obtained round hole polished.
  4. The prepared rail will begin both ends into the guide profiles on the opposite walls, and in the middle part is riveted to the traverses (they are equipped with special cloths).

Visual Wrist Ceiling Scheme

Similarly, other rails and inserts are installed, if they are provided, only the last rail will need to be cut to the required width.

Installation of lamps

The lamps are fixed in the holes done under them, after which the lamps are screwed into them.

Light sources can be located differently:

  • along the walls around the perimeter;
  • along only long walls;
  • over the entire surface of the ceiling in a checker order;
  • asymmetrically with a concentration over work areas.

In the case of the use of PVC panels, the lamp should not emit too much heat.

Ceilings from plastic panels Have excellent moisture resistance, so widely used in the bathroom finish. Read on our website.

Tips for mounting the suspended ceiling in the bathroom you will find.

In a wet room for security reasons, it is recommended to install a low-voltage lighting system for which the voltage in 12 or 24 V. is also more economical. Some halogen lamps are calculated on such a nutrition, as well as the lamps of the new generation - LEDs. The latter differ in particularly low power consumption and a significant resource.

Video on the topic

Suspended structures on the ceiling in the shower room allow not only to decorate the room, but also perform practical functions. Functional framework reliably hides inestetical communications. Another question, what design or model is worth choosing? For this, certain conditions must be observed, for example, the possibility of installation with their own hands. In addition, it must be borne in mind that the bathroom is a specific place.

Exploitation finishing materialsAs well as household items in the shower are complicated by the features of the room. As a rule, difficulties arise with high humidity, temperature drops, fungus or mold occurrence, as well as other negative factors. In addition, the future film ceiling for the bathroom must have durability, durability, reliability and other advantages. Why is it necessary to approach the choice of suspended design.

Strengths

Wheel ceilings for the bathroom must have many advantages to be successfully opposed to various negative circumstances. Separately, it is worth noting that at the same time appearance The ceiling coating must meet high standards and perform their direct functions. It is desirable that the installation can be made with your own hands. After all, the installation of a frame is one of the most important events.

The advantages of the ceilings:


These technological and operational characteristics help the rush overlap to remain one of the leaders in the domestic market. The main advantages in the form of ease of installation with their own hands, as well as undemanding in care allow the frame to remain welcome. In addition, an attractive appearance and wide variety make it possible to experiment with the design in the bathroom. Which ceiling is better to choose?

Varieties

The cutting ceiling in the bathroom can be surprised not only by a variety of shapes and sizes, but the variety of materials used. Covering coating is carried out by various products. In order to determine exactly what material is better, you need to learn all the advantages and disadvantages of each of them.

Wood

The tree has always been considered the most popular materials for finishing. Currently, wooden products are applied not only as outdoor coating, but also ceiling partitions. A vivid example of the successful use of wood - bath. For use under hinged ceiling Different breeds are used, so their quality is summarized. Strengths:

  • Environmentally friendly material.
  • Natural color and structure.
  • High sound insulation.
  • Exterior aesthetics.

Wood coating is suitable for rustic or natural style lovers in decoration. However, in addition to their advantages, like any other material, wood has its weaknesses. Minuses:

  1. Low degree of fire resistance.
  2. High price.
  3. Through service life.
  4. Well absorbs water.
  5. Weakly struggles with microorganisms.
  6. For care, special compositions are needed.
  7. Additional lighting is required.

Aluminum

Suspended ceiling From the metal today turned from an exotic option in everydayness. If it used to be difficult to imagine that in the shower room, the ceiling overlap will be made of aluminum, now it is in the order of things. This material has a whole list of advantages that allows you to use it in the bathroom space.

Strengths:

  • Withstand high loads.
  • Long service life.
  • Uncomplicated care.
  • Extensive range.
  • Presentable appearance.
  • Resistance to fire.
  • It is the source of additional lighting due to the reflecting surface.
  • Does not collect dust.
  • It has good noise insulating properties.
  • Not subject to corrosion.

Aluminum products can be installed with your own hands. Installation is relatively simple, as the elements are assembled by analogy with the designer of only large sizes. In addition, the metal ceiling can be decorated with various images and decorative patterns, which allows the design to have an additional effect. But all the advantages do not hide flaws of the frame. Weak sides:

  1. Fairly high price.
  2. When processing material, certain difficulties arise.
  3. Some multi-level structures will require the participation of specialists.

Usually buyers of aluminum ceilings are secured people. However, even less wealthy citizens can afford to purchase a metal ceiling, as it will pay off over time. Externally, aluminum looks spectacular and suitable for those who prefer high-quality and durable materials with a certain share of market or even luxury.

Plastic

What else can I choose a material like not plastic? These products are characterized by high operational properties, attractive appearance, as well as functionality. Collect the design with your own hands is a real thing. Installation can be carried out without hiring workers, which adds fans to this kind ceiling overlap.

Benefits:

  • low price;
  • ease of processing products;
  • uncomplicated care;
  • high waterproofing;
  • a wide range of;
  • easy installation.

In order to choose plastic you need to weigh all the pros and cons. The possibility of installing with your own hands attracts many, but at the same time you have to try to competently collect the entire design. Although with this, too, there should be no special problems. However, the plastic ceiling still has its weak parties and not always pleasant. Disadvantages:

  1. fragility of material;
  2. a short life;
  3. combustion;
  4. poor withstands the mechanical load.

Most consumers choose the ceiling overlap in the shower room of plastic. This is explained by the low cost of the product relative to its analogues from other materials. It should be noted that other benefits are in sufficient quantity. In addition, ease of care and long service life also on the side of the plastic structure.

Video instruction

One of the most common ceilings in the bathroom is a cam ceiling. Suspended structures are perfectly coping with their decorative function of the external finish. The installed frame is functional, it hides the shortcomings of the ceiling walls, the communications carried out: electrical wiring, ventilation elements, the elements of the lighting are mounted in the ceiling design.

The room in the bathroom is characterized by increased humidity and temperature drops. Rush ceilings in the bathroom, made of persistent, durable materials perfectly cope with such conditions and serve for many years.

In this small review, a description of the materials and structures of the rush ceilings will be given, their advantages and cons.

Advantages of rush ceilings

Warm ceilings covered protective coatings Resistant to water exposure. They do not deteriorate with constant high humidity and in the case of leaks from the upper floors. Not resistant to external influences are suspensions made of galvanized steel, but with a large desire they can be covered with protective paint.


The rush ceilings in the bathroom mask defects and communications located under the ceiling: ventilation, diluted wiring for lighting and tap pipes. In this case, such a ceiling easily disassembled, providing the necessary access to communications.

Installation of lighting elements in the cam ceiling ceiling is not possible. They are easy to embed and organically look. Typically, point lamps are used, uniformly distributed over the area.

Such ceilings have reasonable prices, a huge selection of colors and sizes, the installation of a rush ceiling is easy to spend their own hands and it requires minimal care, despite its long service life. It is enough once a year to wipe the wet rag.

Varieties of rush ceilings

The produced design of the cutting ceilings differ not only for shapes and dimensions, but also used for manufacture materials. There are only three main structural materials: wood, aluminum and plastic. To assist in choosing the most suitable material for a particular room, the strengths and weaknesses of each material should be described.


Wood has previously been the only material for finishing the ceiling, before the appearance of plastic and aluminum affordable prices. The tree has both positive and negative parties.

TO positive sides Natural aesthetic properties and good sound insulation can be attributed. The negative parties are low fire resistance, high cost, susceptibility to moisture and leaks, the need to use protective compositions.

The suspended ceiling of aluminum has a large list of positive properties. First of all, it is its durability, fire resistance, inertness to moisture and ease of installation.

Aluminum ceiling is easily mounted in the bathroom with your own hands. With their help can be implemented different design Rack ceilings in the bathroom, due to the fact that various colors and sizes are produced, decorated with various decorative images and patterns.

The main and only disadvantage of such designs is a high price. Such a ceiling of roads, but can pay off over time due to the possibility of long-term use.

Plastic ceilings are the most simple in the installation, have a lower cost and are very easy to install. It can be done independently with his own hands without hiring employees.

The following properties can be attributed to the disadvantages: a smaller service life, flammability, less strength and a smaller variety of material colors. It is caused by the fact that, in contrast to plastic, it is easier to apply a variety of colors.

Often plastic ceilings Released standard white color With small decorating elements, such as gold stripes.


Installing river ceilings

Before performing work, you must think about the design of the ceiling. After examining the photo of the roll ceilings in the bathroom, you can pick up your individual design And to achieve an incredible effect, playing the location, pattern and texture of the rail.

Installation does not depend on the materials used. Aluminum, steel and plastic elements are attached similarly. The installation of the ceiling is most advisable at the end of the repair of the bathroom, after repairing the floor and walls.

The most complex and responsible stages is to install a horizontal guide profile around the ceiling perimeter and fastening of suspensions. It is necessary to ensure that the guide profile is horizontal, it can be tilted to the concrete plastered ceiling, as it happens that the ceilings are placed not exactly, not horizontally.

Installing the rails in the profile and their fasteners to the suspension is not difficult. To save material, it is necessary to determine the future direction of the rail in advance. It determines the location of the guide rails, which must be installed perpendicular to the future slats of the suspended ceiling.

A more labor-intensive operation is to install lighting devices. Picky lamps are best combined with the rack ceiling, rather than the suspension chandelier.

To mount the lamps, it is necessary to post the wiring to the planned plates of the lamp installation and cut the exact and neat openings under them in the rails. After mounting the rails around the ceiling perimeter, a decorative plinth can be installed.

Thus, the installation of the cutting ceiling does not constitute any difficulty, can be performed on its own. Its main advantages is durability and beauty. The harmoniously selected design of the bathroom ceiling will surely please its owner.

Stock Foto Raking ceiling in the bathroom

If you want to add individuality, pay attention to the cutting ceiling in the bathroom. Manufacturers offer products of various sizes and configuration, which significantly expands opportunities for creativity. We offer to familiarize yourself with the available options.

Read in the article

Advantages and disadvantages of rush ceilings

The choice of similar suspension systems is made due to the following advantages:

  • installation capabilities in. The metal cutting ceiling for the bathroom best meets these requirements;
  • presentable appearance. A wide selection allows you to choose the optimal option for the bathroom, decorated in any style;
  • ecology;
  • long service life. Quality lamellas are able to maintain their characteristics for 15 to 25 years;
  • the possibilities of beautiful design design with defects and irregularities on the ceiling. Installation is performed without prior preparation of the base. Under the formable surface, all communications can be hidden;
  • small mass, which allows you to refuse to use;
  • practicality. Behind the decorative surface just to care for;
  • installation possibilities in a new place.

Registration may be different

We offer to watch a video in which it tells how to disassemble the cutting ceiling in the bathroom:

Of the disadvantages it should be noted the high cost of high-quality structures and a decrease in the height of the ceiling. If the installation rules are violated between the decorative surface and the fungus may appear.

How the cam ceiling is arranged in the bathroom: the main elements

Embling on what kind of wood ceiling is, it is worth considering that it is exactly the composition of this design:

  • guide profile. It is also sometimes called Stringer or Traverts. This is the main element of the supporting design, which has a P-shaped and gear protrusions from below, located through the specified step and used to fix the rails. Grooves and holes at the top are used to fasten the suspensions;
  • suspension. Manufacturers offer products with various constructive design;
  • rail. The main element of the system. It is manufactured from various materials and can have a variety of design. There can be different configurations, but any product can be reliably fixed in the gear protrusions of the guides;
  • additional decorative insert. Mounted between the main rails, filling free space. Are not installed in all systems;
  • wailed corner. Mounted around the perimeter of the bathroom, closing the location of the panels and guide profile;
  • P-shaped framing profile. Perform the same function as a wounded corner. Due to its configuration, it provides a more dense connection of the end and side surface.


Features of the plates of closed and open type

According to its constructive execution, the cam ceiling can be open and closed. The first type involves the installation between the main racks of special decorative inserts. The color and texture of the latter can coincide with the color of the main coating, and may be contrasting.

1 of 6.

The closed type systems assume the installation of panels tightly adjacent to each other. As a result, a solid surface is formed.

Characteristics of rush ceilings depending on the material of manufacture

For the manufacture of rush ceilings in the bathroom used various materials. If you decide to buy a finishing material, familiarize yourself with the features of each type, their advantages and disadvantages. When choosing, you should focus on the general one.


Aluminum Wheel Ceils For Bathroom: Optimal Solution

This option can be called an ideal suspended system. Rack aluminum ceilings are ideal for the bathroom. They are not afraid of significant temperature fluctuations and retain their characteristics under conditions of continuous exposure of moisture. Possessing sufficient strength characteristics, the elements are relatively low weight, which reduces the impact on the carrying structure.

Plastic Rack ceilings: Benefits and Disadvantages

Plastic products attract their functionality, beautiful appearance and high performance characteristics. The main advantages of the plastic cutting ceiling can be attributed:

  • availability. Products have low cost;
  • good cutting cutting. Panels can be easily cut into the desired size;
  • high moisture resistance;
  • a large assortment;
  • easy of execution mounting work. Installation can be performed with your own hands;
  • lightness care.

From the disadvantages it should be noted:

  • fragility. The panel can be damaged with insignificant mechanical effects;
  • combustion.

Wooden rim ceilings

Wood panels are often used in design. Possessing good, the wooden panels breathe well at the same time. However, the installation of such a design will cost weekly. In addition, due to low moisture resistance, wooden panels can be deformed and losing an attractive appearance.

Attention!Before installing wooden Reques All items should be treated with special compositions that increase their moisture resistance.

Dimensions and shapes for ceiling

Manufacturers offer panels of various configurations and sizes. The highest length of standard panels can reach 6 m. However, if necessary, it is possible to manufacture products for more individual orders. Width of the planks can differ significantly. The largest distribution was 12 cm wide width.


The thickness of the rivers depends on the material used in their manufacture, and varies in the range of 0.3 - 1 mm. A lesser thickness has a ceiling in the bathroom from aluminum panels, the largest - from plastic.

The form of the rail can be:

  • krivolyinene. Such slats are curved, angular or wave-like shape. With their help, the difference in height is drawn up;
  • cube-shaped. Such products are similar to flat products, but slightly more protrude over the formed surface on their width;
  • V-shaped. In the cross section of the product have the shape of an equifiable triangle. Installation is performed in such a way that the sharp side is pointing down. The bathroom uses quite rarely.

Ware Ceiling Design Options for Bathroom with Photo Examples

If you decide to become the owner of the cutting ceiling in the bathroom, we offer to see the photo already that can be used as an idea for subsequent incarnation.

1 of 12.

Rush ceilings are Russian trademarks "Albes" and "Bard"

The Albes company offers solid ceilings of various colors and types. In addition to the standard color, you can always choose additional colors. Ecologically safe materials are used to make elements. Easy mounted. Have a long service life.


High quality also differs products produced under the trademark "Bard". They can be mounted not only in bathrooms, but also in other destinations. Have a non-combustible basis on which moisture-resistant and dust-repellent coating are applied. The weight of one square of the rivers does not exceed 1.5 kg.


Ceilings of foreign manufacturers

Leading positions occupy the products of the following foreign manufacturers:

  • Hunter Douglas.. The catalog of the Dutch company presents models from an aluminum profile of various sizes and shapes. All products are certified and distinguished by high quality manufacturing. Three-layer enamelled coating and applying anti-corrosion composition guarantee a long service life;

  • Prometal. The directory of the Italian company presents aluminum ceilings with modern design. The manufacturer offers monolithic and perforated products. Outdoor and closed structures are available;
  • GeiPel. The German manufacturer relatively recently began to release suspended systems and has proven itself to consumers. Stylish products with modern design are certified and able to make reliable competition to other manufacturers. Products are fully safe and can be used to finish in children's institutions.

Which Wheel Ceiling Select for the Bathroom - recommendations of our edition

The service life and the appearance of the decorative surface depends on the choice of a suitable model. Before buying, we offer to take advantage of our advice on what to choose the ceiling in the bathroom. We advise the following:

  • to give preference to thicker designs that have a longer service life. At the same time, be sure to pride the additional mount to exclude the deflection of the item;
  • check the presence of a protective film to eliminate damage to the rails in the process of installation and transportation;
  • take into account the stylistic and bathroom;
  • take care of due, preference to acoustic ceilings;
  • select products from leading manufacturers.

Installation of the roll ceiling

In order for the mounted design to serve for a long time, the installation of the ceiling in the bathroom must be completed by all the rules. We offer to get acquainted with the instruction, following which you can install a high-quality ceiling system with your own hands.


Marking ceiling and installing widespread corners

To install the cutting ceiling in the bathroom with your own hands, it was performed efficiently, you need to make sure that the base is clean, and then apply markup. To do this, mark the point corresponding to the height on which the design will be located.

Attention!Marking is applied taking into account the height of the lamps that have to be installed.

  • we note the required height using the level in the corners of the room;
  • we connect the applied points throughout the perimeter of the bathroom. We form a line using a painting cord: pull it out perpendicular to the base and let go for the formation of a flat line;
  • celebrate places for stringers. They should be placed perpendicularly to raies with a step of no more than 1 m. From the wall, about 40 cm should be retreating;
  • the place of installation of adjustable suspended elements is noted, with which the tires will be held. They are placed along the stringers.

Fastening guides and installation of rails and planks

In accordance with the markup, the P-shaped guides are fixed throughout the perimeter of the room. In places, the connection of the guides with stringers make cuts to exclude the bend of the elements.

5 - Wailed corner. If you leave the end and side edges of the rivers open, it will turn out very ugly, especially since the technology should leaving a small deformation gap between the parts and wall. Corner fixed On the perimeter of the suspension structure, this clearance will hide and give the cutting ceiling completeness and accuracy.


Movement of such corners can be manufactured from steel with decorative polymer coating, aluminum or plastic. The color is selected in accordance with the style of the bathroom. The carrier function is not assigned to the corner.

6 - Wailed P-profile. The functional destination is no different from the corner discussed above, that is, the same frame of the ceiling around the perimeter.


Despite the similarity of the functions, the use of the P-profile is still considered more preferable (though, the installation is somewhat complicated). The fact is that the width of the lumen between the shelves of the profile corresponds to the height of the ceiling rail. That is, the use of the profile not only closes the lumen around the perimeter and adds the view, but also hard fixes the edges of the panels.

But, in principle, both options are completely allowed - to choose a master.

Some varieties of rush ceilings

So, the design of all the cutting ceilings is similar. But there may be significant differences in size, configuration, the relaxation of the plates, according to the materials used for their manufacture.

  • Models of rush ceilings can be an open type, solid brushless, or closed type. The difference is in the mutual arrangement of the rails and their "interaction" among themselves.

Open-type ceilings are collected from the rails, which are located at a certain period of one from the other, and do not touch each other. The lumen between them is sometimes left open if it takes the design style. In the other, more often used by the embodiment, these gaps are closed with layouts, and as a result, a solid surface is obtained.


Another option is the shape and dimensions of the rivers are such that when assembling the adjacent parts at all along its length are quite tightly adjacent to one another. The gaps, if they remain, then become poor.


Finally, there are models of closed ceilings. Reiki are located at a certain distance, but their profile is such that the additional horizontal shelves on it overlap the neighboring. That is, the lumens remain between the panels, but they are closed inside overlapping profiles.


On the forums dedicated to the bathroom department, a lot of copies breaking about which of the models is preferable for the conditions of high humidity. Opinions are divided - some argue that the surface must be closed, warning the penetration of steam into the space between the suspended construction and overlapping. But this is followed by objections, which is hardly even very dense adjacent panels will be able to keep moisture - she will find a path.

It is probably optimal, probably, the solution when the area between the suspended ceiling and the ceiling will still be ventilated. In such conditions, there is less likely to develop mold or fungus. Of course, in the bathroom should be natural or even forced, otherwise the suspended ceiling should not be born.


A successful solution can be the acquisition of a rush ceiling with perforated panels. The space from above will not be "canned", and dampness from there will be easy to evaporate with air flow fluctuations.

  • As can be seen in the schemes above, the rails can differ not only in their sizes, but also the features of the form. In this question, there is a conditionally pleasant division of profiles for several types:

- "German profiles" it is customary to call the rails with clear edges, the absence of any curvilinear surfaces, chamders, rounded corners.

- "Italian profiles" pronounced smooth transitions, roundness of forms.

Finally, the Reiki "French profile" is a kind of intermediate link. It also prevails the severity of lines, but they are already softened by the chamsterities or rounded corners.

There are, of course, the categories of rails that are not suitable for any of the types listed above. This model is emphasized by designer solutions, with profiles sometimes quite unexpected shape and design.

  • Reiki and manufacturing material are distinguished.

The most inexpensive are. They are not terrible moisture, corrosion cannot be in principle, but they do not differ in particular durability. Plastic over time begins to fill up, yellowing, and the ceiling loses its appearance. However, it all depends on the quality of the kit - and polymer products Can serve a lot. In addition, such railings are easy and cheap to replace with new ones when their appearance will cease to arrange the owners.

Steel profiles are also relatively inexpensive. They are produced in great diversity of external decorative polymeric Coatings that are simultaneously and the protection of metal from corrosion. But in conditions of high humidity, it is still difficult to completely exclude the beginning of the corrosion lesion - one way or another, the rails will cut, that is, their edges remain without protection.

The optimal option is definitely aluminum rails. Nor moisture, nor elevated temperatures can disrupt the integrity of the material or worsen its aesthetic qualities (of course, with due care). The rails make their thin sheet, not more than 0.5 mm, that is, they are very small, and they will not deliver difficulties when installing.

You can find races made of wood or wood composites on sale. Probably there is no need to explain that the bathroom should not be considered for the bathroom. And if the owners have a solid desire to place the room "under the tree", then for this it offers metal or plastic models with appropriate imitation.

  • Finally, they can quite significantly differ raters and external decoration. Buyers are invited to choose from both shades, and in terms of gloss of the surface. So, the panels can be in a matte version or reach the literally but the degree of mirror polishing.

It is clear that the choice in this case will be based on the intended style of placing the bathroom. You can find a lot of implemented projects that use a successful combination of rivers of various colors and even sizes, and different layouts between them.
Fully mirror surfaces Although it looks spectacular, but not everyone likes. In addition, for many people, constant moving, flashes reflection, especially in such a specific zone as a bathroom, can cause irritation and even neurosis. So before purchasing this option, it is necessary to weigh his comfort yourself for yourself for yourself, and enlist the consent of all family members.

Advantages and disadvantages of rush suspended ceiling structures

Before making a decision on the purchase of a rack ceiling and its independent installation, it makes sense to weigh all the "Pro & Contra" of this not quite ordinary design.

TO benefits Such a ceiling finish can be attributed to the following:

  • No need to spend a lot of strength to prepare old surface Overlap to finish. Yes, you need small repair, "treatment" from mold, careful priming with antiseptic compositions. But to level the surface - there is no need, since all irregularities will be drained.

  • The design is very light - it will not require powerful attachments, and you can not be afraid for being collapsed under your weight.
  • Suspended design allows you to hide the laid communications - or cable wiring, ventilation channels.

  • It has already been noted that the cam ceiling is excellent for the conditions of the bathroom, that is, for operation with frequent differences in humidity and temperature. This is especially true of aluminum models.
  • A high-quality and competently mounted rush ceiling will last long - the life of aluminum structures reaches 20 years or more. The durability of steel may be smaller - it depends on the quality of anti-corrosion training. Plastic rails lose their decorative qualities faster, but they can be replaced, without dismantling the suspension systems - stringers.
  • A wide selection of options allows you to choose a model under the intended style of a bathroom, realize even very bold projects.
  • The rush design of it requires complex care. Dust panels are not attracted, and small contamination is easily removed by periodic wet cleaning.

TO disadvantages You can rank as follows:

  • The space between the suspended construction and the ceiling becomes a vulnerable place in terms of moisture accumulation. BUT it's a direct path to the emergence and development of colonies. AT obligatory It is necessary to think about the questions effective ventilation Bathroom, including this space.
  • Installation of the suspended ceiling (not only roll) reduces the useful height of the room. Even with the straight suspension of the stringers to the ceiling, the millimeters 50 will still leave. Well, if the lamps are embedded or it is necessary to hide communications - then the decline can be significantly large. For the bathroom, a similar decrease is usually not so critical, but still remember about this circumstance.
  • Conditional disadvantages include quite a high cost of sets, especially equipped with high-quality aluminum railings. But good cheap and does not happen ...

What to pay attention to the selection of a set for a rush ceiling

Production material has already been mentioned above - certainly, aluminum rails will be the optimal option for the bathroom. If the means are limited, you can also purchase other (steel or plastic), but the durability is not the same. And in any case, do not forget about the need for ventilation of the space between the suspended ceiling and overlap, that is, preferences should be given or open models, or having perforation. Alternatively is an additional ventilation channel that can divert wet air from the specified area.

Before you go for the purchase, it is necessary to thoroughly measure the room, plan the location of the plates, calculate their quantity - it will give the opportunity to avoid mistakes and education large number Waste. It is appropriate to give a few tips here:

  • The direction of the rail can be selected by any - how the owners will think. But in the event that it is planned to mount a monochrome premise option, then the preferred direction of the panels is from the entrance, parallel to the lines of the view. So thin lumens between the panels will be less noticeable.
  • If, on the contrary, it is planned to install a ceiling with a pronounced linear structure (and most often it happens), it should be remembered that the location of the panels can or visually lengthen the close room (with a longitudinal location), or make it "wider" (with transverse). Contrast layout inserts only enhance this effect.

The diagonal location of the plates are definitely original, but, we admit, it does not always happen to the place. In addition, to mount according to such a scheme will be much more complicated, and this is hardly a good solution for the "beginning of the career" of an inexperienced master.

  • The location of the plates can affect the size of the room. They try to choose so that in trimming the less than possible material.

Let us explain on the example:

Bathroom room - 1800 × 1300 mm. Planned longitudinal placement of the rails.

If the rails are presented with long and 3000 and 4000 mm long, there are no special problems. We take four meters and divide them in half. From each segment to waste will leave 200 mm - a little.

But if on sale - only three-meter, then from each rail, 1200 mm remains, which is neither there or here. So it will be more profitable to position the panels across. Then, from each rake, the standard length will turn out two mounting parts with a volume of 200 mm - it is also quite normal.

That is, in any case, you need to know in advance what is specifically offered in stores. And try to plan the placement of the structure so that the entire ceiling is assembled from one-piece length and with a minimum amount of waste.

  • When ordering the REC (if they are cut down the length in the store), it is recommended to add several centimeters to the simulated distance. It is better to trim the item in place than to find yourself before the fact that literally a few millimeters lacks because it would seem like a trifling error.
  • It has an important value and width of the rail. And it can vary in a rather wide range.

It should not be chased behind the strips of a large width. The ceiling with them is definitely mounted faster, but in the close room with the bathroom, such panels will be clearly inappropriate. In addition, a very considerable amount can go into waste. The optimal option for the bathroom seems the width to 75, a maximum of 100 mm.

  • If the number of decks for the flow can not be forgotten about the interval between them, if it is planned (empty or closed with layout). Again, much easier will be correctly calculated if it makes a scaled scheme.

When planning, the following is taken into account:

- When installing the walls, they never start with the lumen or the layout insertion - she simply does not hold on there. That is, the rail is always used, a whole or circumcised in length.

Making installation, starting with a whole rail, is also not always obtained. It is possible that the opposite wall or the lumen will remain, or the installation of an overly narrow cut fragment will be required.


  • The mines of the length and number of stringers are carried out after certainty with the location of the rails. It is clear that the traverses should set up strictly perpendicular to the panels, and have a length of the wall to the wall (for deducting a deformation lumen about which will be told below).

Strengthening standards and suspensions will be shown in the section on the installation of the system.

  • It is clear that any conscientious owner will check the purchased panels for damage. There is no point in to give its "blood" for the details with deformed edges, scratches, lining the protective decorative layer, traces of corrosion, etc. For the bathroom too much material is not required, so inspect the carefully every rake and layout. For sale, these products must come with a protective film that will be removed only in progress Mounting suspended ceiling.

  • Many building materials stores practice the preparation of sets for rush ceilings at the specified customer size of the room. Can be offered ready sets for standard bathrooms most common In the city of the series of high-rise buildings. Choose such a way, or cutting it yourself from the details of the standard length - to solve the buyer. In any case, all trimming that were formed during the preparation of the finished set will still be included in the total cost.
  • In the areas of production of any building or finishing materials, there are "authorities" - manufacturers asking quality standards. Are no exception and suspended rush ceilings. You can list the ranks foreign and domestic Companies whose products do not cause complaints.

At the dawn of the distribution of rush ceilings, unconditional leaders and in quality, and on the variety of proposed models were CESAL (France) and Hunter Douglas (Holland). They stay in leaders today.
Nowadays, it is quite possible to stop on domestic products. Thus, the GEIPEL's rush ceilings, produced in Russia in the German license, are famous for the high-end protective and decorative coating - steel panels are not terrible corrosion even in a specific bathroom microclimate. With excellent quality, ALBES products are distinguished, for the production of high degree of cleaning aluminum. The original system of stringers and suspensions makes it possible to experiment with multi-level structures. Not inferior to Western counterparts with quality and durability Suspended systems of the Bard company.
In short, there is from what to choose to not acquire products of doubtful, no one known brands.

Conducting self-installing of the cutting ceiling in the bathroom

In this section, the authors will try in detail, after steps, explain and show how the installation of this suspension design is performed. As a basis, during the preparation of the instructions, several examples of various masters were taken. Therefore, individual operations can be shown with options - you can choose the most suitable for yourself.

The instruction is designed to beginner masters, that is, the simplest and frequently used design options are shown, without creating complex curvilinear surfaces or transitions, without the features of multi-tiered installation.

So why start?

If on the "agenda" installation of the suspended ceiling construction, it is necessary to believe that the rest finishing work The bathroom has already been held. In any case, the walls must already be fully prepared, as they will be fixed by framing profiles. And once the repair has already been released on this stage, the surface of the ceiling overlap in the room should already be in the stage of complete preparedness for installation.

But it often happens that the suspension of the rush ceiling becomes a separate event. It is understood that the walls and gears were finished once a long time ago, and their condition is satisfied with the owners. The bathroom is operated as usual. That is, a desire to improve the interior design of the installation of the rush ceiling construction is being implemented. In this case, to start will have to carefully prepare the surface of the overlap.

Yes, suspended ceiling is able to hide the unsightly kind of old surface. But this does not exempt the owners from holding a number of repairs. And the preparatory stage has a special importance if there are clear signs of lesion on the surface of the overlap


It is necessary to remove unreliable layers of plaster, peeling paint, to carry out a thorough "treatment" of the surface from biological damage, perform the priming of deep penetration with antiseptic and hydrophobic Qualities. It is necessary to close the repair compositions possible slots between the plates, cracks and holes. But to level the ceiling - really no need, that is, the task is greatly simplified.

Without preliminary preparation of the surface of the overlap, it is impossible to install any suspended ceiling!

On the consideration of this stage preparatory work Stop not. But not due to the fact that he does not need attention. On the contrary, given the importance of the process, we recommend to get acquainted with his detailed description In the special article of our portal dedicated to.

And only by readiness the surface of the overlap can be moved to the installation work.

IllustrationBrief description of the operation
When the acquired set of parts for the installation of the rush ceiling will be delivered, the first thing is necessary to take care of a convenient and safe temporary storage. That is, it should be a place in the room where it will be convenient to cut parts and transfer them to the destination place.
The probability of accidental damage must be excluded. Of course, they have a sufficient degree of rigidity, but still made of thin plastic metal. If you get stuck and get on the laid on the racks of the legs (do not forget about children's pranks), then it is quite possible to deform their profile.
And it is difficult to deny it, but it is not possible at all - the item has to be selected.
You can move to the markup. There may be some "liberties", but in acceptable limits that are installed by the manufacturers of ceiling suspended systems.
The diagram shows the main geometric parameters of the collected design. They are about the same for most models, but still better verify this by reading the instructions and the scheme attached to the specifically acquired kit.
So, the letter notation is shown:
"BUT" - distance from the wall to the nearest parallel stringer. It should be no more than 400 mm.
"B" - The step of layout of the suspensions of one stringer is a maximum of 1200 mm.
"IN" - Extreme suspensions should set up no more than 300 mm from the ends of the stringer.
"G" - There is no more than 1200 mm between parallel stringers.
The diagram is drawn on paper or even immediately transferred to the ceiling surface, simultaneously by the lines for which stringers will be installed. With the drawing of these lines, it is very important to observe their parallelism - the guides should not be located at an angle of one to the other.
Next, it is necessary to schedule a line on the walls, which will determine the position of the framing profile, that is, in fact, the height of the suspension flow will be set.
Many factors are taken into account, including the presence and size of lines engineering communicationswhich will be hidden by a suspended design, the height of the stringer and the spreadshell profile.
But most often the main criteria are the dimensions of the lamps that are planned to be embedded into the ceiling construction.
It is clear that the body of the lighting device must be located freely, without resting in the overlap.
Conducting these primary "priking" will immediately determine and with the optimal method of suspension of stringers.
The proposed scheme demonstrates several popular methods for fastening stringers to overlapping.
"BUT" - If a significant reduction in the ceiling surface is not required from the overlap, then it is quite possible to do with self-threads, screwed directly to the overlap (if it is a tree), or in the scored dowel-plugs. This approach is practiced when the height drops are up to 60 ÷ 80 mm. The exact adjustment is performed by screwing up the screwing of the self-pressing of several revolutions.
"B" - You can use a regular suspension, but without applying the needles. Saws screwed through the hole in the upper petal of the spring-"butterfly". Accurate elevation adjustment - as in the first version.
"IN" - The use of a regular suspension assembly, that is, with a spin, according to which the spring lock is moving - "Butterfly". In fact, in this embodiment, no restrictions from the distance from the overlap to the suspended design - it all depends only on the length of the knitting needles.
Whatever the suspension method is elected, the stringers are usually installed at approximately, and already during the installation of the panels, an accurate finish is made to provide an even horizontal plane.
Just for example - Conventional direct suspensions intended for plasterboard structures. Also a completely permissible approach, but the stringers will have to immediately install with high accuracy, since no possibilities of the subsequent adjustment of the position will not be.
And she, by the way, is often needed.
So, with the height of the suspension, it was determined, and it's time to outline on the walls around the perimeter of the room a closed horizontal line, which sets the height of the future ceiling surface. It is on it that will be fastened profiles, and then - accurately put the stringers.
If there is a laser level at the disposal, the task of particular complexity will not submit. In the absence of such a tool, it will have to apply the hydroelectric background. But the usual construction bubble in such a matter can give a considerable error, and it is advisable to be limited to them only in very extreme cases.
By the way, the original conditions are well shown in the illustration before mounting the ceiling. Overlapping - Wooden ( a private house), and the cable layout has been fixed on it. Walls are lined with a cafeter.
The outlined points are connected by a line with a pencil or marker.
It is not necessary to be extremely learned - the main thing is that the boundary is clearly visible, which will establish and align the wall profiles.
Once again, the length of each wall (precisely on the battered line) is thoroughly, and the profiles are cut on this size.
For cutting, you can apply conventional sheet metal scissors.
An angular adjoining of profiles, made at an angle of 45 degrees, look more accurately. Cutting for this is carried out with the use of stusl and hacksaws for metal.
The next step will be to fasten the wall profiles (corner or p-profile) to the walls of exactly on the cut-down lines. Masters use different approaches.
For example, as an option, the illustration shows the fastening on double-sided adhesion. Over the entire length of the shelves of the profile, which it will lay down to the wall, after removing the protective film, the scotch band (dark color) with an indent from the edges is glued, so that after pressing this layer is not necessary.
After that, the protective substrate is neatly removed from the "response" side of the scotch, the profile is accurately exhibited by the intended line, and then tightly pressed against the wall.
The method, at first glance, is seen very convenient and rapid. However, it is necessary to have a completely complete confidence as used as the tape used, in the fact that it does not lose its fixing ability in the conditions of high humidity.
Serious loads on a wall profile, of course, is not expected, but nevertheless ...
Therefore, masters are more often practiced by the usual attachment of profiles to the wall on the dowel.
To do this, it is at first a fitting - the profile is applied to the wall along the battered line, and the centers of holes for fasteners are scheduled. The step of fasteners is about 400 ÷ 500 mm, that is, there is no special "part".
Such a preliminary fitting is necessary so that the holes do not occur on the seams between the ceramic tiles, or at a distance less than 15 mm from these seams. Drilling the tile in the edge zone is dangerous - nothing can exclude the appearance of a crack or even a piece of fragment.
After fitting in the profile, the holes are drilled in the outlined centers. Just a diameter of 4 mm.
Next, another "fitting" is held, but this time already in order to transfer the centers drilled holes On the surface of the wall.
It is best to carry out this operation together. The profile is exhibited exactly along the line, and the markers on the wall are marked with dowels in which the dowels will have to be located.
In order not to spoil the wall decoration, the drilling is better carried out in two stages.
Initially, a special spell-like drill (Ø 6 mm) is installed in the drill cartridge, which will make it gently pass the ceramic lining layer.
Impact drilling at this stage is excluded.
The second stage is already a percussion drilling of a row of Ø 6 mm hole for a dowel-plug, that is, a punch is performed.
The high depth of the hole is not required - just a dowel with a length of only 35 ÷ 40 mm.
In the drilled holes neatly (so as not to damage the tile) a dowel stopper is clogged ...
... And then the finalization of the profile is made on the line and securing it with self-draws in its place.
A similar operation is carried out on all walls.
As a result, a closed forking contour on the perimeter of the bathroom should be turned out.
You can go to subsequent operations.
If it has not yet been done earlier, the stringers are cut along the simulated length.
When cutting, two important nuances are necessarily taken into account.
The first - the starting point of the Stringers should exactly coincide so that the rails do not get selected.
The second - the length of the profile should be such that the deformation gap is observed from about 5 mm on both sides.
Carved stringers can immediately decompose on the "shelves", that is, on the wall profiles, in accordance with the previously performed markup. With a corner in this regard, there are no problems - the shelf is open from above. And if a P-profile is used, then the upper shelf will have to cut on both sides along the edges of the Stringer, and then this "petal" can be carefully bent up. In the resulting "nest" just lay the guide.
In a demonstrated example, the wizard will hang stringers on long screws. Their length should be such that the fastener entered the surface of the overlap at least 30 mm.
The chosen method largely contributed to the fact that the ceiling wooden. However, at any other overlap, it is possible - the holes are simply drilled and the dowel stops are clogged.
Self-tapping screws are fitted through the holes in the upper shelf of the Stringer and screw in the surface of the overlap.
I have a fastener so that the nearest self-sufficiency has been at a distance of no more than 300 mm from it, and the step is withstanding about 750 ÷ 800 mm.
Stringer will be suspended on hats of self-tapping screws. Initially, it can be set so that its lower edge is slightly higher than the bottom support shelf of the used profile (about 10 mm). It is better to spend accurate adjustment after installing decorative rails.
If it is planned to use non-tapes, but full-time suspensions, then the points of their attachment to the overlapping are scheduled (in accordance with the location of the holes or figured sockets.
Then they are fixed on this markup.
Well, then the stringers are suspended and put up in height on the same principle. Only the adjustment passes otherwise - the compression of the spring "wings" of the lock "butterflies" and their movement along the vertical needle.
After the stringers are exhibited, it is possible to move to the installation of decorative plates in accordance with the previously developed scheme of their location.
The process of installing the RELECES is extremely simple: they are snapped on a stringer's croups from a small hand-made application.
That is, at this stage, the main difficulty will be to carry out the right cutting of parts.
First of all, the rail must be trimmed in length.
The recommendations for the choice of material said it was better to purchase panels with a small amount of length. Now it's time to precisely measure the distance between the opposite walls, and then set 5 mm of the deformation gap with each of the sides.
For example, the measured distance is 1965 mm. So, the length of the part must be 1955 mm.
How to spend neat cut?
Bulgarian is excluded categorically and definitely! Overheating of the surface and disruption of the protective and decorative coating will definitely affect the time. Yes, in such a "coarse" tool in this case and there is no need.
It is quite a fairly ordinary knife and scissors for metal. To begin with the outline of the cut line, several times with an effort is carried out sharply with sufficient knife, cutting a small groove.
Then, on both sides, side spring springs of the rails are trimmed with scissors for metal, before exiting the front side.
It will remain only a few times to bend a removable fragment on the scratched furrow - and it is easy and gently separated from the panel.
By the way, do not hurry to immediately throw away short trimming - some of them will still serve for other purposes.
From the finished panel you can remove the protective film (however, some masters are completely removed after the installation is completed).
Rake is installed in its place and snaps on the protrusions of all the stringers with which it intersects.
The starting rail must go on all its length to the corner of a used profile or in the groove if the P-profile is used. Perhaps this will require a small adjustment of the altitude of the layer position.
The next rails usually first come to the ends onto a wall profile (for this purpose a light bend is allowed), and then snap into the traverse.
In the example, an open-type ceiling is mounted. The lumens between the panels at the final installation stage will be filled with layouts.
But nuance - the Master intentionally placed the attachment points of the suspensions precisely above the remaining losers. This will allow the final adjustment of the height - there remains access to self-drawing.
Sooner or later, but the moment of installation of the rail, in which it will crash ceiling lamp, one or even a few. To do this, after cutting parts, the lengths will also have to cut the nests of the required diameter.
The task will not submit special difficulties if the wizard has a high-quality crown drill.
When drilling, the crown should not be made of great effort, otherwise you can cause the tool and jams of the edges of the cutting window.
The acute crown and itself can cut the smooth hole even with a very small application of force.
If there are no crowns, you will have to work with a knife and scissors for metal.
On the front plane of the river with a circulation or template, the contour of the future opening is scheduled.
From the center of the circle to the battered circle, the knife is performed by knife. What will be more, the "cleaner" will turn out the carved circle.
After that, the final finishes are carried out with scissors - cutting bent "petals" are cut with a maximum approach to the outlined circumference of the border.
Perhaps the circle will turn out not perfect, but for the placement of an embedded point lamp, it has no fundamental importance.
The panel with a cut-off jack is set to the destined place - the usual order.
Through the hole, the wires are displayed for connecting the lamp.
If the lamps are ready for installation, then this can be done now, without postponing - it will be even easier.
Installation continues in the same order.
But when two - three rails remain up to the opposite edge, that is, with their position it is already impossible to make a mistake, it is better to switch to the installation of the most extreme panel, which in most cases it is necessary to cut throughout the length.
Why it is desirable to initiate it first - it will be clear from the following actions.
By the way, in order to accurately insure myself from an error, instead of the rails temporarily on the remaining plot, you can purchase trimming, remaining after cutting. So the picture will be completely understandable.
The width of the last panel should be such that it will fully lay on the shelf of a used profile, but did not reach the wall of approximately 5 mm.
That is, the required industrial is carried out, and the reserve is applied on the rail.
Now the question is how to cut on such a long plot?
Option is a knife for a knife, followed by neat clouds. However, at a long time, it is quite difficult to fulfill this operation.
Therefore, it makes sense to carry out such rolling areas.
To do this, from the edge of the panel to the line planned line are made of slits. Recommended area length for quick and neat rolling is about 100 ÷ 150 mm.
After such "localization" to conduct a consecutive rush of the removable band - will not be difficult.
Another option is the entire cut by scissors for metal.
But here it is recommended to "fragmented" the cutting section by transverse slots at first. Otherwise, the operation will be extremely difficult to perform.
Cropped panel after installation in place will be held in Stringer only on the one hand. The cutting edge simply lies on the shelf of a used profile. And this is not very good, since there is no complete fixation, and the rake can jump even from very minor external efforts, for example, from sharp air fluctuations (slamming door, strong drafts, etc.)
But if the P-profile is used as a wired framing, then it is very easy to cope with this disadvantage.
It will be enough to press the cutting edge of the panel to the bottom shelf and expose in this position. And they will help in this - the remaining racks remaining after cutting along the length of the trimming.
They are simply inserted into the P-profile groove, thereby getting reliable crushing.
The installation step of such tabs is nothing regulated - it all depends on the amount of cropping.
But not even often, their location will still securely fix the cutting edge of the panel in the lower position, and it can no longer be "ringed".
By the way, when it was aware of the compilation of the installation scheme, it was especially noted that not only the last panel can be completely cut in length, but also the first. In this case, the approach to its installation and fixation will not differ from the method described above.
After installing the edge panel, you can fully fill the remaining section of the ceiling.
After that, if necessary, it is adjusted to the height of the arrangement of the stringers - so that the edges of the panels lay on the shelves of the framing profile, but did not rest on them. Such adjustment can be carried out by twisting the screws, on which the stringers hang - as we have seen, for this, their location over the remaining lumens was thought out in advance.
If other suspensions are used (for example, the same spring "butterflies), then no one bothers to leave the unclosed areas in advance, that is, in these places, the panel cannot be installed. It will be possible to get a hand to the clamps to close the height of the suspension slightly. Well, then it is easy to fill these sections with already ready-made slats.
If the model of the suspended river ceiling assumes the installation of layout inserts, then their installation and will become the final operation.
Profiles are cut at the required length, while the industrial is carried out from the opposite external edges of the horizontal shelves of the received profiles.
A protective film is removed from the sliced \u200b\u200blayout.
Then the profile is inserted into the gap between the rails and is fed up. About reliable fixation usually says a characteristic click - the protrusions entered the response grooves.
After installing layouts, the ceiling suspended design acquires additional rigidity.
All, the installation of the cutting ceiling is completed!

How can you make sure of the proposed instructions - there is nothing facilitious in the installation of the roll ceiling. The task is quite possible to be satisfied even for a novice master if he mobilizes all his skills and accuracy, it will be strictly followed by technological recommendations.

To add information, you can see the video examples of the installation of rush ceilings. Here is one of them:

Video - Master shares the experience of mounting the rush ceiling in the bathroom.