Plastic application for interior decoration The premises are widespread. It is used for walls, and for ceilings. Allows to solve many problems associated with the quality of the ceiling.

Plastic panels have excellent performance and attractive performance. appearance.

Plastic panels have many positive qualities. They are technologically technologically and beautiful. From a huge range you can always choose what you like. The suspended ceiling of plastic with their own hands is convenient, quickly and practical.

Features of the choice of material

The suspended ceiling can be made of different materials (wood, chipboard, foam, etc.). One of the most common structures is a suspended ceiling of plastic. This surface has a number of advantages: simplicity of installation, low weight, large color gamut, low cost. The most important thing is the plastic ceiling has a high moisture resistance. It can be calmly washed with water. Plastic is not deformed when the moisture and temperature drop.

Most optimal material For plastic ceilings is polyvinyl chloride. It can be used in the form of tiles or panels. Long PVC panels are found. They are made of two species - seamless and embossed. Seamless panels have a solid smooth surface, and smooth edges allow you to unnoticate panels with each other.

The embossed panel edge on one side ends with a groove, and the other edge has a longitudinal spike. When docking the spike panels enters the groove, and a smooth rectangular groove is formed along the junction.

The panel is performed as two layers of plastic, between which the ribs are formed, which ensures sufficient mechanical strength. The facial surface of the panel is polished (lacked). Standard PVC panels are implemented 25 cm wide and 2.7 or 3 m long.

Back to the category

Selection of ceiling design

Plastic ceiling May have two basic designs - suspended and tensioning. Stretch plastic ceiling is made of vinyl film. During the installation of such a ceiling, the film should warm up to 70º, which requires the use of special heat guns. Installation stretch ceilingstend to produce professionals.

To install the ceiling of plastic with your own hands, the suspension design of PVC panels is most suitable. The suspended ceiling is a horizontal surface formed from the glossy layer of PVC panels installed on metallic frame. At the same time, the frame is fixed on the wall and ceiling, at a certain distance from the surface ceiling overlap.

The frame is a firmly connected mounting structure in the form of a lattice. Metal profiles frame made. The frame of the frame is fastened with the guide profile of the P-shaped form. Usually, a profile of type PN 28Х27, 28 mm wide and 27 mm height is used. The main is the ceiling profile having a C-shaped form. The PS60x27 profile is used. From this profile creates a lattice frame design.

The frame of the frame is attached to the ceiling using suspensions that ensure the mounting profiles to the ceiling overlap. For a cross-shaped profile connection, the "crab" fastening is used. Between themselves, the ceiling profiles are connected using a P-shaped connector of dieth 30-40 mm.

For montage PVC The connection panels in length is carried out using a plastic docking profile (H-shaped molding). In addition, when plastic installation is completed to hide the initial gaps, plastic plinths, starting profiles, cornice profiles, corners (external and internal), kleimers can be used.

Back to the category

Preparatory work

The main ceiling after installing the suspension will be hidden from an extraneous eye, so increased requirements are not put forward to its surface. However, it is impossible to allow him to face, and the most important thing is that it remains traces of mold or fungus after flooding. The surface of the ceiling overlap should be primed and placed so that there are no cracks and chips on it. Plots with a manifestation of mold must be pre-treated with an antiseptic, for example, a solution of copper sulphate.

Back to the category

Surface markup

An important preparatory stage that affects the quality of all suspended ceilingIs marking. First, the true height of the main ceiling at different points of the room is specified. For this, the height of the wall is washed with a tape measure at least than three points - in the corners and in the center. In the corner with the smallest wall height, a mark is made at the height of the sinking of the frame profile, that is, at a distance of 5-10 cm from the ceiling. The distance is determined by the need for communications.

If installing built-in (point) luminaires or pipes on the ceiling is envisaged, then this distance is 8-10 cm; If nothing superfluous is planned, then it is 5-6 cm. Then the label on the wall in another corner is applied, but taking into account the real height of the wall. The suspended ceiling must be parallel to the floor. Through the stamps in the corners, a straight line is littered with a well-strained and pre-painted by the construction cord. Similarly placed the opposite wall. Lines are connected to each other with the markup of other walls. Thus, the line is watched throughout the perimeter of the room - it is the bottom limit of the guide profile of the frame.

Marking of ceiling profiles is carried out on the surface of the ceiling. For this, at first, the parallel lines in the longitudinal direction are fought. The first and last lines are carried out at a distance of 15-20 cm from the wall. Between them, parallel lines are carried out with a pitch of 30-40 cm. Similarly, lines in the transverse direction are placed. A grid must be applied on the ceiling, which indicates the location of the central ceiling profile line. Marking of the installation of suspensions is made on these lines. The first marks are made at a distance of 25-30 cm from each wall, and all subsequent 50-60 cm increments. Marks should not coincide with the lines crosshair - they should be shifted at least 5 cm from the crosshair.

Back to the category

Installation of the guide profile

Installation of the frame of the suspended ceiling begins with the installation of the P-shaped profile on the wall along the platforming line. At first, at the bottom of the profiles, the holes for fastening to the wall are drilled: the first - at a distance of 10-15 cm from the edge, followed by 30-40 cm from each other. Then it is applied to the wall, and marks are applied on it. By the perforator or electric drill in the wall, the holes are made with a diameter of 8 mm. Plastics dowels are inserted into the holes. PN profile is attached to dowels with screws. Thus, the guides are installed throughout the perimeter. The horizontal installation should be checked.

Back to the category

Installation of ceiling profiles and installation of communications

Initially, profiles are installed, which are directed along the short wall. These profiles must be drawn from the wall to the wall. If you cannot select the profile of the desired length, then it is joined from two segments. The compound must be reliable and rigid - using a P-shaped standard fastening or metal strip. Installing PS profiles are made according to the markup on the ceiling. Ends are attached inside the guide profile, fixed on the wall. Profiles are located down. PS profiles in a perpendicular direction are mounted from segments, the length of which is equal to the distance between the installed PS profiles. Attach them with the "crab" fastening.

Fixing PS profiles on the ceiling is carried out through the suspensions. The suspensions bend by forming a P-shaped form. The height of the side rack should strictly correspond to the distance from the ceiling to the PS profile. The suspension platform is fastened with screws in a dowel on the main ceiling in marked places. Suspension legs are mounted on the side of the profile of self-draws profile.

Before fastening plastic panels, It is necessary inside the frame to accommodate the entire communication system (if necessary). First of all, it concerns electric wires - for a chandelier or system of point lamps. Wires must be collected in a bundle and arrange inside the corrugated hose. Wiring is made to the location of the lighting equipment. The wires are neatly attached to the frame profiles.

The suspension plastic ceiling is one of the most practical and hygienic decorations. The material from which the plastic panels are made, PVC has a glossy surface, on which microbes and harmful bacteria practically no possibility to multiply. In addition, this material is environmentally friendly and does not distinguish an unpleasant odor.

The listed quality of plastic often determine the territories of their use. As a rule, these are kitchens, bathrooms, balconies and loggias. Plastic is practically not afraid of moisture and frost. Install the plastic suspended ceiling with your own hands is very simple and this work will not cause difficulties even at the novice.

Before you get acquainted with the installation secrets, read the sequence of operations. The list is simple, but it is impossible to rearrange items. He looks like this:

  •  Calculation of suspended structures
  •  Marking of the level of the future ceiling
  •  Installation of crates and mortgage parts for lighting devices
  •  Installation of the starting profile
  •  Ceiling cladding PVC panels

Installation of plastic ceilings will require not a tricky set of tools, which is probably available at each business master: drill percussion or perforator, level for the mark of the horizontal ceiling plane (water or laser), roulette, pencil, line, painting thread, saw for metal and a hammer.

Important to remember! To accelerate the cladding process, it is recommended to use an electric screwdriver with a magnetic crosst nozzle.

Calculation of the materials for the ceiling

To calculate the suspended ceiling plastic, it is necessary to calculate the area of \u200b\u200bthe existing ceiling. To do this, multiply the width of the room at its length. You can measure with a roulette with one partner, which will also be needed for other operations.

It is necessary to add 5-10% of the total area to the figure. This is a necessary supply to compensate for the costs of PVC plates. The most running size is a width of 25 cm, length 3 m. However, other sizes can be found on sale.

As a crate, you can apply a wooden bar of 40 x 40 mm or 40 x 60 mm. If the climate is rather wet, you can use a used or guide profile for a drywall Ceiling UD-27 and carrying the CD-60 ceiling profile. They are made of galvanized metal and are not afraid of corrosion and deformations from excess moisture.

The amount of UD-27 profile is equal to the perimeter of the room. The carrier ceiling profile of CD-60 is located with an interval of 600 mm from each other. From the edge of the wall, 300 mm retreat and calculate the number of pieces. Usually the width of the room in meters is divided by 0.6. Profile length 2.5-3m.

To ceilings suspended plastic looked beautifully as a guide or starting profile, you can apply PVC profile with a decorative plinth. It can be executed in monolithic form, and can be attached to the profile groove separately. Its quantity is also equal to the ceiling perimeter plus 3-5%.

In order for the docking of the plinth in the corners it looks aesthetically beautiful, the plinth can be trimmed in a joiner's stouch at an angle of 45 degrees or buy already ready plastic corners. The fastener of the frame to the ceiling is made by dowels with an interval of 50-60 cm. For fixing PVC plates to the ceiling, galvanized screws are used with a press-length 25 mm long.

Installing the ceiling of plastic panels

Install plastic on the ceiling start with marking. First, the horizontal plane of the future ceiling is determined. To do this, use laser or hydroelectric background. The minimum ceiling height can be lowered on the thickness of the timber or metal profile.

If more is required, then galvanized CD-60 ceiling profile suspended on straight or P-shaped suspensions for plasterboard Ceilkov. Under the timber you can put wooden dies.

The laser level is fixed on the wall of the dowel, retreating from the existing ceiling the required distance. The device is installed in the horizon with its standard bubble levels. When the laser beam is turned on, it denotes the horizontal plane of the future ceiling on the walls.

Using the painting thread with blue, it is necessary to "repel" on the walls. After that, the ceiling is made of the axes of ceiling profiles. To do this, you can use a ruler, chalk and a building corner of 90 degrees.

At the line marked on the walls of the Dowels with an interval of 0.5 M, the installation of a used UD-27 profile was installed. To ceiling with an interval of 60 cm dowels fasten P-suspensions. Their perforated legs are lowered down at an angle of 90 degrees. To them galvanized self-drawing 12 mm supporting the carrier profile.

If you plan to install a chandelier, a mortgage part to the existing overlapping is mounted on the plastic ceiling.

You can make it from a piece of plywood and direct suspensions, consolidating them in the corners. Bending the legs to the required height, the detail of the dowels are fixed to. Do not forget to drill a hole in the center of the board and display the lighting wire into it.

To the used UD-27 profile with self-pressing with press sunderate the guide profile around the perimeter. The plastic ceilings are made in such a way that with one side of its side there is a spike, and with another groove. The first plate is cut into size and cut off spike. After that, it is crushed into the guide grooves of the starting profile cut-off spike to the wall and rushing until it stops.

Self-presss with pressshabiba are first fixed to the ceiling profiles in the upper wall of the groove. The second clipped plate is inserted with a spike in the groove first. In order to reduce the junction between the second panel, the palm's heel is closed. It is also convenient to make a hammer through a wooden cry.

The whole process is repeated until the last panel is laid in plastic ceilings. It may have to trim not only in length, but also in width. At a distance of 1-1.5 cm from the cut, it is necessary to drill holes in the face layer of the plate. It should be on the diameter of the screw of the self-press.

Self-tapping screws and fix the last plastic ceiling panel. Do not forget to drill a hole for the wire in the plate on which the luminaire will be located. The ceiling of plastic is ready and if you have any questions, the video on the installation of plastic ceilings will help give them an answer.

More recently, there were not many ways to finish the ceiling. Cheer, paint with water-free. Mobblers still dare to punish the ceiling with wallpaper - and that's it. And today there are ceilings suspended, stretch, mirror, stained glass, etc.

Ceiling cover with plastic panels The easiest, economical and fast way Finishes.

To date, one of the most sought-after, especially among lovers to do with their own hands, has become a ceiling of plastic. Such popularity is due to the fact that it is quite simple to make a ceiling of plastic, especially for those who have had to face the suspended ceilings, and it will only cost a little more expensive than a plasterboard ceiling.

Familiar stranger

Strictly speaking, the ceiling of plastic and there is a suspended ceiling.

It is attached to the main ceiling using special suspensions on a frame of metal products or wooden plates. Only material for panels instead of plasterboard serves polyvinyl chloride, one of the safest and harmless plastic types for health. Suffice it to say that from PVC, in addition to wall and ceiling panels, a packaging is made for food.

Such a ceiling is easy to make with your own hands, giving him an attractive appearance. It will not be visible panel seams, besides, it will serve you much longer than the plasterboard counterpart, and the care requires the most minimal - from time to time to remove dust from the plastic. It is easy to do with a damp cloth, as the plastic is absolutely not afraid of water.

When choosing panels, it is important not to confuse and not buy instead of ceiling walls. Although they are made of one material, but they differ significantly. Wall panels compared to the ceiling panels are much harder that is of great importance.

If you mount such panels on the ceiling, you will get a significant load on its framework. And this is fraught with: in one spaced day, the frame may simply not withstand, and the ceiling will collapse. And if you install the ceiling panels on the wall, then they are deformed with time, since their mechanical strength is significantly lower.

Back to the category

Preparation of basic ceiling

Make such a ceiling of plastic with your own hands is not harder than the usual suspended ceiling of plasterboard. Installation of any suspended ceiling, incl. And plastic, you should begin with the preparation of the base ceiling. Its surface should be carefully cleansed from the detached lime or plaster and process the surface with anti-grab solution.

Then you need to take care of the ceiling by the electrical wiring. Indeed, in most cases, lamps and chandeliers will be attached to the ceiling. Before mounting the ceiling, you need to fasten the wires and at least bring them to the switch. Wires necessarily need to be securely isolate. With electricity jokes are dangerous, so if you do not have enough experience in this matter, it is better to seek help from a specialist.

To independently mount the plastic ceiling, you will need tools:

  • perforator or electric drill with a winning drill;
  • hoven for metal;
  • construction knife;
  • roulette;
  • corolnic;
  • jackhammer cord;
  • water level;
  • shuroprup.

From the materials do not forget to purchase:

  • anti-grab solution;
  • suspensions;
  • dowels (be sure to take one diameter with a drill that you will drill holes);
  • plastic panels;
  • ceiling profiles;
  • saws.

Back to the category

Cutting device

Frame for plastic ceiling can be made from both wooden rails and a metal guide profile. It is also preferable to the second option, since the metal is less prone to a change in its size under the influence of temperature and humidity.

You need to decide in advance, for what distance you will lower the panel. At the same time, it is necessary to take into account the depth of its lamps - mostly from 5 to 10 cm. Deciding with a height, you need to install and fix the guide profiles strictly horizontally. It is better not to rush here and repel all the time. Otherwise, having hurried and installing the wrong profile, you will not leave yourself another way out, how to make a ceiling oblique, which will immediately rush into the eyes.

From the base ceiling in the corners of one of the walls is measured down the desired distance. It is important that marked tags are on the same level, so be sure to check their location using a water level. Then these two tags using the cord are connected to one horizontal.

Taking a died out of the horizontal behind the landmark, you need to spend the same lines throughout the perimeter of the room, checking them using the level. This will be a horizontal plane to.

The next step in the installation will be the installation of metal guide profiles on the marked boundary. Profiles are fixed directly to the wall, drilled in it a perforator or hole drill, using plastic dowels and galvanized screws for fastening.

In order to do not break the horizontal when attaching profiles, the end of the untrined profile is laid into the end of the attached, then its other end is stirred strictly on the markup, and the profile is attached along its entire length to the wall.

Having finished with the installation profile on the walls, you need to install a profile and on the ceiling itself. To do this, on the ceiling along the direction of installation of the ceiling profile, you need to fix direct suspensions in 50-60 cm increments. The suspensions must be fixed strictly along a straight line by beating it with a painting cord. Ceiling profiles are attached to these suspensions, and guide profiles fixed on the walls are stacked. With such a suspended ceiling design, there is no danger that it will fall on your head one day.

Plastic panels are increasingly used as a finishing material for walls and ceilings. Their popularity constantly tends to increase, which is due to good performance, aesthetic appearance and simple mounting work. Another significant advantage of the panels of this type can be called an affordable level of price indicators.

How to choose plastic panels

Plastic panels can be used without much concerns in rooms with high humidity.

Such material is distinguished by resistant to the effects of the aggressive environment and fluctuations in temperature indicators - suitable for. Moreover, their use prevents the formation of mold and fungus, which is relevant for. When choosing PVC panels, the length and widths should be taken into account. The material surface may have varnopy, glossy or matte performance.

Another significant advantage of PVC panels is the lack of need for careful alignment of the surface, as well as the ability to hide individual elements of communications under the frame.

Photo: Bathroom trim with plastic panels

When choosing this variation of the finishing material, attention should be paid to the fact that the plastic panels for walls and the ceiling have certain differences. The first possesses higher weights. In addition, they differ in a more rigid structure.

Bathroom Option Bathroom Plastic Panels

Plastic panels designed to finish the ceiling have a smaller weight. This is due to the need for mounting work at height. The minimum weight indicators will significantly facilitate this procedure.

Wall decoration and ceiling in the kitchen with plastic panels

Along with this, the ceiling plastic panels are more fragile. When performing installation work, you should be very careful, as you can easily damage the surface of the finishing material.

Wall decoration with decorative plastic panels

With a standard thickness of 5-10 mm, the width of the panels can vary from 25 to 50 cm. The length varies from 2.7 to 3 m. When choosing a finishing material, you should pay attention to the quality of the panel color, the uniformity of the drawing and the correctness of the forms. It should also be taken into account the quality of the performance of ribbonic. They should not hang around from the outside. The surface of the material should not contain characteristic chips and cracks.

From the quality of the density and flexibility of the PVC panel will depend on the level of stability of the material to deformation. If it is tightly squeeze such a panel, then it should not be traces of mechanical damage.

Required tools and materials

When installing plastic panels on the wall and the ceiling at the initial stage should be selected required tools and materials. To resolve the issue associated with installation, may be needed:

  • pVC panels;
  • drill;
  • dowel;
  • cord and pencil;
  • perforator;
  • ladder.

Moldings and corners should also be added here. Through the use of the latter, you can achieve the most evenly marking. Otherwise, when installing plastic panels on walls or ceiling, certain difficulties may occur.

Photo: Plastic panels under the bathroom tile

Plastic panels are selected depending on the features of the room planning. IN small room It is advisable to use narrow panels. Under the condition of finishing a more spacious premises, it is advisable to resort to the use of wider products.

Photo: ceiling decoration with built-in lamps of PVC panels

Instead of dowels, self-tapping screws can be used. They are needed if the framework will have a metal execution. Dowel are relevant only subject to use wooden carcass. It should also be noted that the foundation base cannot be installed in rooms with high humidity. This is due to the fact that such material is subject to rotting, as well as the negative influence of fungi and mold. For this reason, in the kitchen and in the bathroom, the use of a wooden frame is not an expedient solution.

Construction of wall crates and ceiling

The framework device is a priority question that should be resolved when installing plastic panels on the wall or ceiling. Above it was noted that a wooden or metal frame variation can be used as the basis. The optimal distance between the individual elements of such a base is equivalent to 50 cm. Thus, it is possible to compensate the surface of the surface of the ceiling or walls. The recommended sequence of action will look like this:

  1. Marking.
  2. Installation of profiles throughout the perimeter of the surface.
  3. Installation of transverse profiles.
  4. Installation of the base of fastening PVC panels.
  5. Installing panels.

During marking for starters, it is necessary to determine the smallest height of the ceiling. From this point on the walls it is necessary to spend two lines. To do this, you can resort to the use of a cord painted with chalk. The correctness of the markup is checked using a construction level.

After the markup should establish profiles around the perimeter of the surface. The fixation of these elements should be carried out without the formation of voids and spaces. Otherwise, it will be very difficult to achieve maximum reliability of the entire design.

Frame from profile for walls

After installing transverse profiles, the task is to be allowed to install the base for the fixtures of the panels. For fastening plastic profiles, you can use the screws.

Frame from the profile on the ceiling

When installing metal frame variations, the frame should be as attentive as possible. The total weight of the design will be quite large, so it is necessary to ensure high reliability of its attachment. Fastening the suspensions K. concrete overlap It can be carried out by using special dowels with a hat on a sleeve. Ordinary dowels will fall, as concrete is distinguished by the presence of internal voids.

Fastening the first panel on the frame

Holes in the metal profile can be drilled simultaneously with the preparation of holes in the wall. Subject to mounting the frame on ceramic tiles It is advisable to resort to the use of the perforator only if the glue mixture is completely dried. With a different scenario on the surface of the tile, cracks may appear.

Panel mounting features

Or the wall is expedient to just start with the determination of the optimal length of the material. It is recommended to provide a solution to this issue in advance. To trim plastic panels, you can resort to the use of ordinary hacksaw.

There is nothing complicated in the installation procedure of such panels. They are pre-placed in profile, and then fastened with the help of self-tapping screws. It is recommended to start the installation of plastic panels from the corner of the room. This also applies to the ceiling, and walls. It is also very important to trace the quality and level of installation of the first element. It should be located strictly perpendicular to the wall or ceiling. Otherwise, the panel will not be able to snap into the groove and the need to dismantle and the new installation will arise.

Special label for plastic panels with fasteners

The edges of plastic panels must enter the planks. The last detail is adjusted under the optimal distance to the wall. If necessary, you can cut the panel with ordinary hacksaw.

Tip! Before performing work related to the installation of plastic panels on the ceiling or wall, it is recommended to pre-take care of the installation of various elements of communication systems. They are able to disguise well water pipes, Wiring or heating pipe.

There are many materials that can be used to finish the ceilings, but the most practical and convenient options are panels from PVC. And even more attractive, they become for the reason that their installation is independently quite simple, so there is no need to attract the brigade of builders. About how to mount PVC panels to the ceiling and how to choose them correctly, our article will tell.

PVC panels - what is it?

PVC panels - finishing material made from polyvinyl chloride - plastics, which is badly burning and has chemical resistance. Now consider the design of PVC panels.

PVC ceiling panels

They consist of two thin plastic sheets interconnected by a multitude of rigidity ribs. On the length of PVC panels on one side there is a large assembly, and on the other - the small fastener shelves. The first is used to attach a polyvinyl chloride sheet to the ceiling frame, and the second is to connect the installed sheets with each other.

So why are PVC panels so popular? Below is a list of advantages of this finishing material.

Selection of PVC panels

So, you know what kind of material it is, now it is necessary to choose the PVC panels and purchase them. To begin with, decide on the size. On the this moment In construction stores you can see the plastic panels or in the form of a lining, or in the form of rectangular plates with dimensions shown in the table below.

Table. Standard dimensions PVC panels.

How to determine what is a good stuff? How not to acquire low-quality PVC panels that crack when installing or lose their color after a couple of years of service?

Ceiling panel prices

ceiling panels

When a hiking store should pay attention to the following points. For small rooms in the room, the most suitable PVC panels of the "lining" type will be. They also need to give preference if you want to have a ceiling of plastic stylized under wooden boards. BUT for larger areas, it is better to take panels or sheets of polyvinyl chloride. As for the thickness, it is mostly the same in all types of PVC sheets and is 10 millimeters.

  1. The ribs of the rigidity of PVC panels should not shine on the front side. Also consider their quantity - than the ribs are more, the design panel is stronger and more durable.
  2. The surface of the material must be perfectly smooth, without any defects, chips and damage.
  3. The mounting and fastening shelves should be flexible enough and do not break while trying to bend them.
  4. Try slightly pressing the PVC panel. If a crack or dent appears on the surface, then you have a poor-minded copy, which is desirable to refuse.
  5. Take several panels and fold them together. Good stuff Skeins smoothly and without gaps.
  6. Pay attention to the appearance of purchased PVC panels - instances of all packages must be monophonic and possess the same texture. In some situations, polyvinyl chloride sheets from different parties have minor differences in color.

What to pay attention to when buying PVC panels: 1. The number of rigid ribs: what is less, the product is unstable.
2. The ribs of plastic tiles must be integers and straight.
3. The surface of the PVC panel must be evenly painted, smooth and without irregularities.
4. Two panels should be highly connected in the location of the docking groove.

In addition to the PVC sheets themselves, you will need to purchase an installation profile. It consists of two "shelves", one of which is attached to the frame, and the other is connected to the plastic panels. The starting and finishing sheets of PVC are attached to the installation profile.. When it is selected, attention should be paid to the thickness of the plastic and whether the profile does not have any bends or defects.

Do not forget to also buy a ceiling plinth - it not only serves as a decorative element of the future ceiling, but also covers the clearance between the wall and the ceiling from PVC panels. Usually such plinths are called cartoons, made from plastic and attached to glue.

As for the appearance of the purchased PVC panels, it should be determined independently, based on designer project Room finishes and your own taste. You will be presented with many options for panels of various colors and textures. Here you can advise to use the color matching table so that the appearance of the ceiling is well combined with the color of walls and furniture.

Required tools

Now it is necessary to compile a list of tools that will be needed to attach PVC panels to the ceiling. You will not need something complicated or very expensive, all of the above can be found in any construction store.

  1. Perforator - We need to install the frame.
  2. Screwdriver. If you wish, securing the plastic panels to the profile or bruster, it is possible and using a perforator, but it is very difficult, and it is very inconvenient to use it for such tasks. Therefore, the presence of a screwdriver will significantly facilitate the work and increase the speed of installation of PVC panels. And if you are creating them not on the self-tapping screw, but with the help of a bracket, then instead of a screwdriver take construction stapler.
  3. To control the accuracy of markup and location of plastic panels you will need corolon, level and painting thread.
  4. Pencil or marker To apply lines and designations of PVC panels in the order of their laying.
  5. Roulette For measurements.
  6. Electric logs or disk saw - For cutting profile of the frame and plastic panels.
  7. Stair-ladder. Of course, you can always do the table or stool, but it is unsafe and uncomfortable.
  8. Rubber Kiyankawhich can be useful for fitting PVC panels to each other during installation.

In addition to the tools, you need to purchase material for the frame. It can be either a metal profile (UD-27 brands for the main and CD-60 for the guide), or a wooden bar. Also, do not forget to buy fasteners (self-tapping screws, brackets or adhesive), drills for a perforator, nozzles for a screwdriver, dowels and suspensions for a profile.

PVC Prices Panels

PVC panels

Preparation

It is worth noting that even before visiting the construction store it is worth starting preparatory work. The first point that needs to be done is to create a plan. For this measure the length and width of the room and draw a scheme of the future frame.

Then calculate how many sheets and what sizes you need to make a mounted ceiling.

Important at the planning stage will not be superfluous to place the lines for which you cut the cutting profile and PVC panels. At the same time, they can be made of marked with a pencil and marker, indicating in which order them should be laid.

Remember that good and thorough planning is a guarantee of quality work and reliable insurance against various troubles and the need to redo all over.

Second Preparation Point - delete old finishing materials . If the ceiling was covered before the thick layer of plaster or paint, then all this must be removed, otherwise the heavy pieces of the old finish can damage the frame or panel themselves.

Final stage preparatory work – marking of the line of the future frame. To do this, measure with a tape measure the height of all angles of the room. Find the one in which it will be the smallest. From it, you should measure 50 millimeters and spend a strictly horizontal line (control it using painting yarns and levels). The same line on the exact same height should be carried out on the opposite wall. For them, the frame of the suspended ceiling will be further installed.

Prices for plaster

plaster

Montage Karcasa

On the lines, every 50-100 millimeters are placed openings drilled by a perforator. After that, the dowels are inserted into them. Upon drilled in the wall holes with self-draws (for example, the main frame of 6x40 mm) is fastened, made by their UD-27 profile, cover to the wall. In this case, do not forget to use the level and ensure that the frame elements are located strictly horizontally.

Then, with the help of suspensions and the CD-60 profile, guide rails are created to which the PVC panels will be mounted. The optimal distance between them is 500 millimeters. The metal profile CD-60 is mounted with a lid to the floor, the ends of the rivers should be inserted into the main frame profile.

Tip! Alone correctly mount the frame and install PVC panels is very difficult, therefore such work should be performed with a partner. There will be no superfluous person's help that will serve and take tools, cut and bring plastic panels.

Having finished with the installation of the frame, check it out several times on the horizontality and the lack of a drop in height - the future ceiling of PVC panels should be perfectly smooth, and it largely depends on how high-quality a doome is installed.

An alternative to the metal profile may be a frame of wooden bar. Such a design will cost cheaper, but at the same time exposed to moisture. Its installation technology is largely similar to technology for a metal profile.

  1. We carry out two strict horizontal lines on opposite walls.
  2. Arrow holes with an interval of 5-15 centimeters.
  3. Insert the dowels into the holes.
  4. Breeping the main frame bar to the wall with the help of self-tapping screws and the aforementioned holes.
  5. We mont with suspension guides from a wooden bar.
  6. Breeping guides to the main frame with the help of the corners.
  7. We check the entire design using the level and roulette.

It is worth noting that for a wooden frame, a more optimal fastener for plastic panels will not be self-tapping screws, wrapped with a screwdriver, but the brackets for which a construction stapler is needed. Also, the metal fasteners can be replaced with "liquid nails" - with construction glue, capable of tightly hold the plastic panel and framework even with relatively large loads.

Prices for "Liquid Nails"

liquid Nails

Important! With additional load, such as large chastley Or the second level of suspended ceilings, the frame must be reinforced. To do this, mount more rail guides, reducing the gap between them. This is necessarily not only for wood frame, but also for design from a metal profile.

Fastening PVC panels to ceiling

For a start, mount the installation profile by attaching it a large "shelf" to the rail guides using self-samples. It can be installed both throughout the perimeter of the room and in the places of fixing the starting and finishing PVC panels.

Now it is necessary to cut off the PVC panels according to the previously developed plan and the applied markup. Many professionals advise to make a leaf length of a slightly smaller width of the room, since polyvinyl chloride can expand even at low temperatures, which means that the installation of "additive" can lead to future deformations of the suspended ceiling.

Tip! Also, the installation of PVC panels in a low-temperature room should not be installed, especially since under such conditions, this material becomes fragile.

If you plan to make built-in lighting for a suspended ceiling - it's time to make cutout cuts under the lamps in PVC sheets.

Once the material is fully prepared, you can start mounting the first (or starting) panel. To do this, you and the assistant you need to insert the starting panel into the installation profile from the fastener shelf, and then fasten it with self-strains on the rails. At the same time, make sure that they are not taken too deep into PVC, otherwise there will be a risk that the tapping screws will damage the sheet.

Next, neatly "poke" the next panel with the mounting shelf with the starting, and fix it with the fastener. Thus, he alternately fasten the PVC panels to each other. You should connect them with great accuracy to prevent damage. Also, it is also impossible to leave gaps or cracks, PVC panels should fit tightly to each other. If necessary, you can make a "fit" with the help of non-mounted shocks of rubber xy.

Before mounting the last panel PVC, measure the remaining unclosed space of the ceiling by roulette - Often the plastic panel does not fully fit there, therefore it must be trimmed. At the same time, make sure that the slice is as smooth, and between the finish pVC panel And the installation profile should not be any gaps.

The final stage - landing on glue ceiling plinths . After that, the suspended ceiling from PVC panels can be finished. Next, it is already possible to install fixtures, wall decoration and cleaning of construction trash.

Video - Make a ceiling of PVC panels

As you can see, the fastening of PVC panels to the ceiling is a fairly simple occupation that does not require big knowledge and experience in construction. Therefore, for self finishing of the room and, in particular, the ceiling plastic panels are the best options.