An alternative to purchasing furniture is the opportunity to create it yourself from scrap materials. Make original Coffee table You can do IR yourself in a couple of hours. The process is simple and exciting even for a beginner. It requires initial skills in handling carpentry tools, ingenuity and a certain amount of aesthetic flair.

Coffee table exists in an innumerable number of varieties.

Advantages of creating home furniture yourself:

  • minimum financial costs;
  • exclusivity of the model;
  • individual convenience.

    It’s easy to make: if drawings are required, they’re not at all complicated.

    You can place a sample you created yourself in the living room, bedroom or children's room. Products created independently look great in city apartments and country cottages, delighting hosts and guests with its unusualness and style.

    A coffee table in an interior is like a business suit for a man or makeup for a lady.

    Which ones exactly? necessary materials will come in handy, depends on the basis of the item being collected. To make a coffee table with your own hands, you will need a variety of auxiliary things.

    First of all, the decor gives the table its appearance, so it would be appropriate to start from the end: with the decoration and decoration.

    It will be difficult to assemble an accurate and durable table structure without glue, varnish and sandpaper. Permanent paint will also come in handy - choose convenient sprays, they can quickly and without getting dirty to cover the entire surface of the tabletop. A good quality primer may be needed to cover the base and supports. You can buy it at a hardware store. Don’t forget the materials for decoration – fabrics of various textures and densities, lace, colored plastic or glass, etc.

    It will no longer be difficult to select a design from ready-made ones or to develop your own: the load on the object is small, and if a flaw occurs, it is not difficult to redo it or do it again.

    Ancillary materials will not be superfluous - ordinary newspapers, large cardboard, plastic sheeting, so that “production” waste is not carried around the room.

    The cost of labor and money is nothing at all.

    To assemble the planned model, you need to prepare the necessary tools.

    First of all, these are a hammer, scissors, and pliers. You will need different fasteners, furniture nails (regular and rivets) or screws of different sizes.

    You can decorate the table different ways, see fig.

    To quickly cut wood parts, you need a hacksaw. If you have a carpenter's table and you have skills in such work, then having a chisel, cutter and plane will be a plus to process wooden base with professional precision. To decorate the elements you will need a sharp chisel or a set of carpenter's knives.

    With the help of the most ordinary wallpaper, you can quickly and inexpensively decorate the most ancient, shabby table, as long as it is strong.

    What the coffee table will be like is up to you to decide. Next, we decide on the design and construction.

    DIY coffee table made from pallets

    To quickly do beautiful furniture, often take wood as a basis. It can be made from a regular pallet. One product without gaps and four wooden supports is enough to create a beautiful table on your own.

    1. We start making an original table from pallets with markings.
    2. Having decided on the dimensions and made all the necessary marks, we cut out the middle of the pallet: a flat surface should be on the front side, a raised surface - with symmetrically located bars - on the bottom.
    3. Treat the legs chosen for work (preferably carved) with a primer and let them dry.
    4. At this time, start tinting the top and sides of the tabletop.
    5. When all the elements have dried, you can begin to secure them. Use nails (or screws) and hardware to connect.

    Each layer, except the finishing one, is sanded after drying, but for this you need velvet sandpaper, which you can’t always find on sale.

    Such models look good if they are low. An interesting coffee table can be made from an already unnecessary radiator central heating. To do this, it must be painted evenly. Instead of a tabletop, you can take glass or a wide board that fits the size.

    You can bring back a pile of empty shells and sea pebbles from your vacation at sea.

    For mobility, wheels from an old baby stroller are often used. The construction of a furniture masterpiece will take a minimum of time and money.

    DIY coffee table from window and books

    You can find a new use for an outdated window - use it to create a table with your own hands. If necessary, sand the frames and coat them with paint. As supports, you can use not only wooden legs (bars), but also old books that do not fit on the shelves.

    If you have replaced ordinary windows at home with metal-plastic ones, then you can make an interesting coffee table from one old window.

    A coffee table will be convenient in the country if you spend a lot of time there. You can apply a pattern or a thin layer of matting paint to the glass of such an original tabletop.

    Coffee table from the front door

    Unnecessary Entrance door can also serve as a base for your table. To do this, take its central part, and the rest go to the supporting sides, since the coffee table will not be very high. For greater stability, you can make the bottom shelf from chipboard.

    Well, if you replaced the input or interior doors, That old door use as material for a new table.

    Cover the surfaces of the product - tabletops and supports - with tinting. Matte varnish will look good.

    Often, outdated doors have embossed zoning; when using a table, this is convenient, since you can safely place a tray with dishes without fear that it will slip off.

    A table made from old furniture - a wardrobe or chest of drawers

    Sometimes it’s a pity to throw away good pieces of furniture that have gone out of fashion. They can serve as the basis for new products. Smooth cabinet doors, especially if they are varnished, are an excellent preparation. Legs are also useful - straight or carved, if the product is planned to be low. You can use two doors, connecting them with cut pieces from the side panels of the cabinet. This option requires very little time and is practically free.

    Wooden boxes for fruits, vegetables or other items are a universal material for creating furniture with your own hands.

    Chest drawers are suitable for a composite or solid table. Fitting is carried out by sawing off the protruding parts. The assembled tabletop is installed on any supports - for example, elements of the same chest of drawers, bars treated with a primer, books, etc.

    DIY stump table

    An unusual coffee table is made from a single piece of wood - a stump left over from a cut pine, birch or poplar. It should be wide enough and even, with beautiful rings. Depending on the height of the stump, you can choose from the following:

    • with a low tabletop on thin metal legs;
    • medium height without supports (the base of the stump serves as support);
    • low table on wheels.

    A sanded stump or log can be placed directly on the floor or wheels can be attached.

    If desired, you can leave the natural appearance of the stump - with bark (leaving it as is or varnishing it) or paint it in any color, after first removing the bark. White and beige tones look best.

    Suitcase table for travel lovers

    You can also use vintage voluminous suitcases as a tabletop. This original handmade coffee table will appeal to romantic people who like to frequently spend time on educational trips.

    Nowadays, coffee tables have finally gotten rid of the hypocrisy of their owners.

    The basis is an old suitcase, preferably made of thin wooden planes. Leave the locks in place; they serve as fasteners. You can also leave the straps. The suitcase can be tinted or left in natural form, depending on the condition of the surface. For legs can be used as wooden blocks(or carved furniture supports), and wheels.

    This kind of furniture is made from a wide variety of materials: wood, glass, steel, aluminum, plastic, chipboard and plywood.

    To make the surface more resistant to moisture, you can coat it with varnish. The fasteners here can be both bolts and hardware. You can drill holes for the legs in the bottom of the suitcase itself and secure them using iron rims with spacers.

    The edge of a table top made of solid wood or laminated furniture board should be processed with a router to give it a beautiful shape, and then sanded with sandpaper.

    Table made of logs for nature lovers

    Wood is a material that can be easily processed. Sand half a wide log and thinner logs. The bark on the sides and bottom of the countertop can be left or removed. For fastening, use nails and metal angles. Instead of legs made from logs, you can take metal ones or legs from old furniture.

    It seems as if this coffee table is made entirely of birch logs, but this is not the case.

    Making an exclusive coffee table from wood is quite simple. Ordinary logs will serve as both the base and supports.

    Reels as the basis of the product

    A coffee table made from a large cable reel looks very interesting. Firstly, the round shape looks harmonious. Secondly, it can be made rotating. Thirdly, the side cavity can be used for a variety of items - magazines, books, writing instruments, disks, additional cutlery (if they are not needed on the table during tea drinking).

    Large spools of industrial cable are a rare but ideal stock for coffee tables.

    Its side flat sides will serve as a table top.

    The coffee table can be made with or without supports, simply by placing the coil on its side. You can use the “Health” disk as a torque element.

    The cavities on the sides look more interesting if they are zoned symmetrically using wooden boards secured with glue.

    Making a glass table

    A DIY glass coffee table is very easy to make. As a tabletop, ordinary thick glass (square, rectangular, round) is used, preferably tempered, since the material is quite fragile and can crack from impact or temperature changes.

    Glass – you can only use tempered glass, otherwise the reliability of the table will be in doubt.

    The coffee table can rest on wooden carved legs with a wide base, books, hemp and other elements. It is advisable to make a central support for it. The elements are attached with a special durable glue.

    The final stage is decoration

    When decorating a hand-made sample, the most different ideas. Smooth surfaces hold a pattern or ornament around the perimeter well, while non-uniform surfaces hold appliques and other elements well.


    When making a table with your own hands, you can use additional decorative inserts. If you're using a cable reel as a base, it often has a center hole. You can put a tall vase with dry plants or flowers in it.

    The material you choose for decoration should be abrasion resistant. The exception is elements designed to create the impression of a vintage product.

    The main thing here will be strict adherence to the proportions indicated in the drawing.

    Paint tinting can also act as decorative design. You can create patterned surfaces, add natural streaks to wooden surfaces, shade parts of the elements, creating the most advantageous look for your product.

    If the coffee table is unstable, then objects may slide off it, so you need to carefully adjust all the supports to the height. An embossed finish can also be used as an anti-slip measure.

    The finished product is treated with stain, painted, varnished or “aged” - as desired.

    For the manufacture of such models, absolutely different materials– fantasy will not allow you to limit your ideas. Try it out, come up with options for furnishings, this will make it look not only stylish, but also completely new.

    Wood is the easiest material to process and the most pliable.

    VIDEO: DIY coffee table

    50 photo ideas for DIY coffee table design

Making furniture at home, not on a production scale, is not a complicated process. Minimal skills in handling a hammer, a hacksaw, a tape measure and a screwdriver are sufficient.

But before you make a coffee table with your own hands, you need to stock up on materials, study various schemes assemblies, sketches and drawings. If you have some imagination, furniture can be made from any unnecessary trash collecting dust in the garage or attic.

Equipment

In the process of making a coffee table you will need tools and supplies. And also various photos, sketches, drawings or just ideas about what you can create with your own hands from scrap materials.

To make a table you will need:

  • Hammer;
  • Self-tapping screws and nails for wood;
  • Hacksaw,
  • Jigsaw (for decorative carvings or cutting workpieces of the required length at a certain angle)
  • Glue;
  • Screwdriver;
  • Primer;
  • Varnish or stain;
  • Various finishing materials for decoration.

Before actually making a coffee table, you need to decide what it will be made of.


Material

In principle, a coffee table can be made from any unnecessary, but not shabby, trash, of any design. Old, but fairly durable (not corroded by bugs and mold) furniture. It all depends on your imagination and what you have at hand.

Most often, such a piece of furniture is made of wood, metal, plastic, tempered (non-fragile) glass. But you can also convert the dining table into a coffee table. Take apart an old wardrobe, sideboard or buffet for parts and make something out of them. The wheels can be taken from an old baby stroller.

How the process of manufacturing and assembling the table will proceed will be influenced solely by enthusiasm and the available material at hand (or feet).

Options

Considering various diagrams and drawings of coffee tables from various craftsmen who create their masterpieces on the World Wide Web, we can come to the conclusion that the most optimal and cheapest option is to make it out of wood. For example, the same pallets, saw cuts, boards, logs and logs.

A coffee table made from:

  • Pallets;
  • Radiator;
  • Old window blocks;
  • An out-of-date entrance door;
  • Wardrobe;
  • Chest of drawers;
  • Boxes;
  • Polenyev;
  • Glass;
  • Reels from under cable bays;
  • Old chests and suitcases.

Step-by-step instruction

Let's make an original transforming coffee table from pallets. Let's look at the entire manufacturing and assembly process step by step. To do this, we need a durable pallet that is not rotten, without mold and cracks and crevices.


When such an item is found, we proceed to making a coffee table:


Decorating a coffee table

When the furniture is made and assembled, it needs to be brought to perfection and given an aesthetic appearance. At the same time, it is better to apply the design on a smooth, well-treated (polished) surface, and appliqués and other overlays on a rough, non-uniform surface.

Before you make a coffee table for dolls for your child, you need to choose one finishing material so that the child does not tear it off at the first opportunity and its scraps do not subsequently lie around the room.

When it comes to decor, there are a lot of ideas. Let's look at some of them:

  • Artistic carvings look good on a wooden tabletop; on a glass table, shards in the form of a mosaic or a chessboard are laid out and fastened with glue;
  • The more relief, unusual elements, the better (carving, engraving, various “artistic disgrace”);
  • To upholster the side surfaces, you can use fabric, ribbons, lace with tassels (make an imitation of a tablecloth);
  • You can also decorate with coarse fabric such as a mat or from an old coat;
  • Metal corners set with glue will perfectly emphasize the brutality of the coffee table;
  • With the help of stain, wood can be aged, giving the furniture an unusual look;
  • All smooth, sliding surfaces can be intentionally “roughened” by burning various patterns and lines onto the surface.

A handmade coffee table can be a home decoration. Made with sufficient quality, it will carry not only aesthetic, but also practical functions. Delight the eyes of owners and guests and last for many years.


Photo instructions on how to make a coffee table

Coffee tables are as relevant today as they were many years ago; they can be purchased separately from an upholstered set or as a set, however, like all other pieces of furniture, this one has a high cost, despite its small size. That is why you can make it yourself.

Coffee tables have relatively high prices in furniture stores, however, unlike other pieces of furniture, they are quite easy to make yourself.

Preparatory work

To do it yourself wooden table, you need to stock up on the following tools and materials:

  • solid pine;
  • varnish on water based;
  • white spirit;
  • acrylic paint;
  • brush;
  • self-tapping screws;
  • electric jigsaw;
  • screwdriver;
  • radial sander;
  • milling cutter;
  • drill.

As for solid pine, you need to purchase material whose thickness is 25 mm. The dimensions of the workpiece for this table are 1500x500 mm. This model does not require separate legs. In order to cover the table, you will need 300 g of water-based varnish. Acrylic paint must be purchased with a shine, which will give the product a tone; about 100 g of this product will be spent. To apply the composition, you need to purchase a brush or take the one that is available, it is worth considering only that it will have to be disposed of after the work, since it will the glitter will be impossible to get rid of.

Tools for making a coffee table.

The coffee table should be assembled using self-tapping screws of two sizes: 4x60 and 4x40 mm. To be used for wood processing electric jigsaw, which comes with a set of files designed for clean cutting of wood. It is preferable to use a self-clamping chuck; it is more convenient for the master when carrying out work. In any case, it should be possible to install a drill with a diameter of 10 mm in the chuck. The radial grinder can be replaced with a regular screwdriver, which has an appropriate attachment.

Related article: Selecting the color of an interior door

From hand router You can also refuse in favor of a traditional plane, since not every craftsman has the first version of the tool. It will be necessary to remove more impressive chamfers.

Drills should have the following sizes: 10 and 5 mm, the first option should be used instead of a separate countersink. A set of bits with an extension cord will also come in handy.

When cutting the material, you don’t have to try to calculate the size of the radius; for this you can use a traditional steel hula hoop as a template.

Preparing for the assembly process

When making a coffee table, you have to perform two stages of product processing: preliminary and finishing. The first stage includes cutting, beveling and sanding.

You need to remove the chamfer by approximately 5 mm; it looks aesthetically pleasing and will not “eat up” the thickness of the countertop externally. Even before covering the elements with tone, sanding should be done in three approaches in the area of ​​the ends.

Drawing of a coffee table.

Such work must be carried out using the technology below.

After you have sanded the sections, you should cover them with a layer of varnish.

You must be prepared for the wood structure to become brittle under the coating. After drying, sanding and varnishing should be done again, this should be done until a smooth cut can be achieved. In this case, care must be taken not to damage the plane.

Wooden table installation technology

When making a coffee table, before you start gluing the elements together, you need to prime the joints with PVA, which can be replaced with wood glue, then the surface should be left to dry. The planks with legs must be mated with self-tapping screws with dimensions 4x40, while when fastening to the tabletop, fasteners with dimensions 4x60 should be used.

The coffee table should not have a resinous surface; in order to get rid of it, you should use white spirit and a large number of rags. It is advisable to carry out such work in an open space. Otherwise, the smell will remain in the apartment for a long time.

Related article: Electrical wiring in a wooden house

The varnish must be mixed with shiny paint and covered the surface of the table. You can experiment a little with the remaining acrylic by drawing patterns under the final layer of varnish; they will not be very noticeable and intrusive, you can only see them in reflected light.

Wooden coffee table with legs

Coffee table assembly diagram.

The coffee table can be made by analogy with the one described above, however, it can also have legs in its design. To do this, you will need to use a workpiece from an array of the required size. It is necessary to saw off material from the element on four sides (not two). The size of the tabletop of such a table can be 950x650 mm. The array in this case should have a thickness in the range of 35-40 mm. The blank for this table will be a material with dimensions of 1280x980 mm. The legs can be ready-made balusters, which can be purchased from the construction department; their top should be square, the side of which can be limited to 60 mm. The blanks for the legs can be sawed off so that the table is of the required height.

If you saw off the table top radially from 4 sides, then instead of the elements that in the first case served as legs, you will be able to get a finished table base in four parts. To fasten them, they must be tightened with confirmats with dimensions of 5x90 mm. In this case, the blanks should form the shape of a rectangle, which should be screwed to the tabletop using corners. Do not forget that the elements of the “box” part must be sawed off to length; this will allow you to obtain a structure of the correct shape after assembling the table.

When installing the legs, you should use self-tapping screws, mounting them from the inside. The reliability of the base box will be achieved by the fact that the structure of the wood on the long elements is horizontal.

This way the model will have legs. If desired, such a table can be turned into a dining table at the installation stage; to do this, it will be necessary to cut the legs, leaving a more impressive length. When making cuts using a jigsaw, you can make curly movements.

Coffee tables were very popular in the 90s of the twentieth century; they were placed in living rooms and served to store newspapers. In the century many people read high technologies last news online, and therefore rarely buy magazines. But such tables have not yet lost popularity and are still installed in apartments, because they are comfortable and functional. And instead of spending money on buying new furniture, you can make a coffee table with your own hands. All you need is a little imagination and effort.

From the history of the coffee table

This piece of furniture has a very long history, despite the fact that it became most popular in Russia only in the twentieth century. A coffee table is a small table, often elongated or with a round top., which was usually placed in the living room in front of or between the chairs and served for storing magazines, books and other printed materials. It could also be used to decorate the interior or as a coffee table to place cups of drinks on. According to GOST, this is a small low table intended for decorating premises and using in a recreation area.

Such tables first appeared in Europe - a part of the world where people love comfort and beauty. The first table was made around the 18th-19th centuries - according to historians, it was made by a certain W. Goodwin. After this, this type of furniture began to be actively produced by a couple of furniture companies.

On a note! The height of the old and modern tables was very different. The ancestors of the modern variation were much taller. The height of the product was particularly influenced by the East, where it is customary to make small tables.

Nowadays, a coffee table can be seen not only in living rooms, but also in offices and other rooms of the house. Its main difference from a regular table is the small size of the tabletop and relatively low height. Some tables, in addition to the table itself, also have shelves-crossbars, on which it is convenient to place directly the press or any small objects. In some variations of tables, such shelves are replaced with drawers. You can put souvenirs, vases on the tabletop itself, use it as a stand for mugs and glasses during tea drinking, etc. Thanks to such a table, you can create a cozy seating area in the room or create a small corner.

Typically, the height of a coffee table is no more than 50 cm, but in general there are tables that are both smaller and larger. The owner's wishes play a big role here.

Prices for different types of coffee tables

What to make it from?

So, we figured out the history of the tables. This is truly the furniture without which any room seems not as cozy as it could be. So it’s worth purchasing it, especially the most simple options are inexpensive. If so we're talking about about dear ones design options, but you don’t have the funds for them, or you just want something of your own, individual, then an alternative to buying can be making the table yourself. Advantages of a homemade product:

  • minimal cash costs;
  • the opportunity to realize your wishes to the fullest;
  • exclusive design;
  • convenience due to precise adjustment of parameters and sizes;
  • the opportunity to make the table of your dreams;
  • a chance to use scrap materials for manufacturing;
  • a chance to give things new life.

A hand-made table can be placed in any room of the house or office. It will not only fit harmoniously into the interior, but also warm the soul because it was made independently, and no one else has exactly the same product.

Now that interesting and unusual design solutions, magazine tables can look anything you want. They can be quite large or compact, simple and carved, with different shapes of legs and table tops. Here it’s up to the creator’s imagination. Even in a store, sometimes you can find very interesting variations that will definitely decorate the interior and will serve faithfully for many years.

A variety of materials are used for making coffee tables:

  • glass;
  • metal;
  • tree;
  • stone:
  • plastic.

In general, you can use anything and you can combine materials with each other. Even natural material in the form of driftwood can be used in skillful hands. Of course, the simplest option is to make a table out of wood. It is easiest to work with at home.

Table. Basic materials.

MaterialCharacteristics

This is the simplest, but at the same time durable material. A table made from solid wood is distinguished by its beauty, environmental friendliness, strength and durability. Working with wood at home is easy and pleasant, no need to buy additional equipment. This category of materials also includes wood derivatives - plywood, MDF, chipboard. They can also be used to make coffee tables, and also do not require any additional equipment. But, for example, MDF and chipboard are more difficult to saw, the materials have high strength and density. They are very afraid of water. Plywood is easy to work with, but is less durable than solid wood. True, find plywood good quality it doesn't always work out.
Typically, metal is used only to make a frame or support for a table; tabletops are not made from this material. It is quite difficult to work with it at home; it may require special equipment such as welding machine. But if you wish, you can also use metal to create homemade table. It will be strong and durable. It is only important that the metal is covered with paint or a special protective layer, otherwise it will quickly rust.
Typically, glass can be used to create table tops and shelves for coffee tables, while legs are made from metal or wood. Glass is not easy to work with due to its physical properties (fragility), but thanks to this material, interesting design solutions can be realized. The disadvantage of glass tables is that stains and stains will constantly appear on their surface, which are not easy to get rid of. These are also quite heavy products due to the fact that thick glass is used - a thin sheet will make a table that is too fragile.

On a note! If desired, you can turn it into a coffee table and a regular table, and also use stumps, driftwood, remnants of old furniture or household appliances, remnants of repair materials. Here you just need to turn on your imagination.

What do you need for work?

So, the simplest version of the table that you can make at home is a wooden one. And to work with wood or its derivatives, the following tools and materials may be required.

Do not forget that before the main work you need to draw a clear diagram of the future table and estimate its dimensions. The drawing will help you avoid making mistakes in the future, and will also provide the ability to calculate the required amount of materials to manufacture the product. So it won’t hurt to arm yourself with a sheet of paper and a pencil, as well as a square, a ruler, and a tape measure.

On a note! Those who own a computer can be advised to use design programs where you can draw the selected model of the table, calculate its dimensions and even estimate it appearance eventually.

Making a table from slats

From ordinary thin wooden slats you can very quickly and simply build a universal table, which, if it is strong enough, can even serve as a bench.

Step 1. To create a small table from slats, you will need boards from which slats will be cut (2.5x7.5 cm - 3 pieces, 2.5x10 cm - 1 piece, 2.5x5 cm - 8 pieces). You also need to take fastenings for the legs (4 pieces), the legs themselves (conical ones about 40 cm long are possible), screws and self-tapping screws, wood putty and paint, as well as decorative nails. You will also need sandpaper. From the tools you need to get a drill with drills, a hacksaw or jigsaw, and clamps.

Prices for the popular range of miter saws

Miter saw

Step 2. Next, you need to take boards 2.5x7.5 cm and cut their ends at an angle of 45 degrees, and from those that have parameters of 2.5x5 cm, you need to make slats that have the same length as the very first boards cut at an angle, only inside, up to 45 degree cuts.

Step 3. Then you need to take the blanks made second and place them between boards cut at an angle. All slats must be level. Next, you need to measure the distance between the outer boards and make two jumper blanks from a 2.5x10 cm board. They will play the role of two supports for narrower slats. These jumpers must be secured with self-tapping screws to the slats. Also, using a special jig, you need to drill two holes at the ends of the supports. They will allow you to connect the structure with the outer bars. However, you can simply connect them with self-tapping screws.

Step 4. The blanks for the box (2.5x7.5 cm) must be pressed with clamps to the edges of the structure. The main thing is that everything is assembled and installed smoothly. To prevent any traces left from the clamps, it is recommended to place small pieces of wood under them. Now you can screw the sides to the jumpers through the holes made in step 3, or simply with self-tapping screws.

Prices for clamps

Clamps

Step 5. You need to measure the width of the table and make the ends of the box. The end edges of the slats in the middle, as well as the edges of the outer boards sawn at an angle of 45 degrees, must be lubricated with special wood glue.

Step 6. Next, you need to install the end boards in this place and tighten them with a belt. The table blank should be left in this position until the glue dries. You can additionally secure the boards to the slats using decorative nails.

Step 7 Now all that remains is to sand the surface of the table, then cover it with primer and paint, and also attach the legs to it. It is important to remember that after applying the primer you need to wait for it to dry and only then apply the paint. Other work should be done only after the paint layer has completely dried. In addition, the table can be varnished.

Driftwood table

Original and stylish table can be made from ordinary driftwood found in the forest and a piece of glass. Here you don’t even need special skills to turn natural material into a beautiful coffee table.

Step 1. First of all, in the forest you need to find a snag of suitable shape and size. Usually, just the root part of a fairly mature tree is used.

Step 2. It is necessary to remove all the bark from the surface of the driftwood, clean it of debris and soil.

Step 3. It is necessary to saw off the excess wood from below and above the driftwood, forming the most even cuts. One of them will serve as a lower support, the second - a support for the glass.

Step 5. The next step is to coat the surface of the driftwood with wood varnish and let the varnish dry well. You need to cover the entire surface of the former tree.

Step 6. Now it's time to work on the tabletop, which will be made of glass. You need to cut a piece of the required size, and then sand its edges. It is important to remember that the glass must be thick enough and the edges must be sanded using water.

Step 8 You need to drill holes in the glass for the bolts that secure the glass to the driftwood.

Step 10 All that remains is to close the bolts with decorative plugs and that’s it, the table can be used.

Table made of logs

A very interesting and original table can be made from ordinary logs.

Step 1. First you need to make a frame-box, for which you use ordinary plywood about 2 cm thick. You need to cut a base blank measuring approximately 60x80 cm from a sheet, and attach plywood walls to it on top.

Step 3. Some of the logs need to be secured to the base around the outside of the box. At the bottom of the base you need to attach legs or wheels for the future table. It is necessary to glue the logs to the base using glue, but they additionally need to be fixed from below with self-tapping screws.

Step 4. Next, all the logs are installed inside the box, and the spaces between them are covered in layers with wood putty. The main thing is to dry each layer well. Once the putty has dried, it is important to sand the surface of the table well.

Step 5. Now the table can be used. It is also recommended to cover its surface with transparent varnish.

Using the same principle, you can make tables from larger logs, or you can immediately take a large stump, peel it from the bark and varnish it. All that remains is to screw the legs to it - and the table is ready!

Video - Table made of wood and epoxy resin

Video - Plywood table

Video - Wooden table

As can be judged based on everything said above, it is not difficult to make a wooden table for the living room, which will serve as both a coffee table and a tea table. Of course, there are also critically complex variations, and to make them you cannot do without skills and abilities. However, if you wish, you can choose something light, and as a result it turns out that a simple homemade coffee table from ordinary wood it's not that difficult to do.

The living room will look empty if it does not have a coffee table made of chipboard or other suitable material. If you wish and have free time, you can make a coffee table with your own hands. The recommendations offered below, as well as drawings of coffee tables, will help with this. If you are planning to make a coffee table with your own hands, then you can easily find suitable drawings here.

Table made of drawers Metal table Transformable table

To make a coffee table with your own hands, you will need:

  • hardboard or plywood, if you are going to create a coffee table from plywood with your own hands or a transformable coffee table;
  • boards;
  • tape measure to help you determine the size;
  • hammer;
  • grinding machine;
  • 3-4 legs. If your plans include a round coffee table with your own hands, then you should take 3 legs;
  • hacksaw for woodworking;
  • drill and set of drills;
  • screws, self-tapping screws, finishing nails;
  • putty and high-quality glue;
  • paint and primer;
  • sandpaper.

You may need additional tools, it all depends on what kind of coffee table you plan to make.

How to make a coffee table?

You can create a tea table with your own hands, following the diagram:

  1. Cut the ends of the boards at an angle of 45º, cut out elements from wood material or chipboard, the length of which will be equal to the length of the blanks made.
  2. Place the pieces in the center, carefully aligning the ends.
  3. Take measurements to determine the distance separating the end bars. Using the obtained parameters, cut out a couple of blanks that will be used as lower supports. Fasten them with self-tapping screws. Screw fasteners into each longitudinal rail to give the table strength and stability.
  4. Drill a couple of holes at the ends of the support crossbars, which will be useful for combining the structure with other elements. If you don't have enough experience with the tool, practice using scrap wood scraps.
  5. Place the workpieces on the sides, secure with a quick-release device called a clamp. Craftsmen who create a coffee table from chipboard or from soft wood (solid pine) do this: they place board scraps under the supports of the fasteners. Due to this, they avoid traces remaining on the surface.
  6. Firmly fix the outer beams to the base, screw the screws into the pre-made holes.
  7. Take measurements to find out the width of the base made (this is necessary in order to understand how long the workpiece for the end part should be). Experts say: “I assemble the item with millimeter precision, because I cut with a small margin in length, and carefully grind off the extra centimeters.” When making a wooden coffee table, take this advice.
  8. Wet the end parts with water, apply adhesive, and assemble the individual parts. Tighten it with a belt. This will allow you to fasten the structure together and fix it in a certain position. For a stronger bond, use finishing nails.
  9. Sand the assembled coffee table with your own hands, removing any rough edges. The gaps formed at the seams must be filled with putty.
  10. Color the assembled, DIY coffee table using a ready-made project.
  11. Place mounting plates on the lower crossbars of future coffee tables, which will later be useful for making the lower part. Make holes and screw the legs into them.

Making a transformable coffee table with your own hands is a little more difficult, however, the assembly diagram for the coffee table is approximately identical.

A transforming table, made with your own hands from scrap materials, will complement the room and make it more functional. A transformer for the living room is optimal for the room.

1 2 3

As you can see, making a wooden coffee table with your own hands is not as difficult as it might seem at first glance.

DIY coffee table on wheels

1 2 3

If you wish, you can assemble a table from chipboard with your own hands on wheels. A folding coffee table is very convenient to use, as it allows you to move furniture from place to place without any extra effort. Making an original coffee table with your own hands is quite a feasible task. Make a dining option according to the algorithm presented above, and then attach wheels to the legs. You can remove this part from an old cart and equip a dining table or a stylish folding table using boards for magazines or other accessories.

To secure devices at home, use high-quality screws. Attach the wheels to the base of the structure, making sure that they do not peek out from underneath. It is unacceptable that the base makes it difficult to move the homemade table. Adjust the location that the coffee table will occupy: low or high level supports It is important that the wheels rotate without difficulty, allowing you to move the table.

DIY glass coffee table

Tables with glass are very presentable and practical. The transparent tabletop goes well with a variety of materials. To make a wood coffee table with a glass top, decide how thick the glass should be and choose the appropriate cutting method.

To make a glass coffee table with your own hands, you will need a furniture panel in which a hole of the desired shape is cut. Next, you need to fix the pre-cut glass in it (for this purpose it is most convenient to use a glazing bead). If you have a glass cutter, it is better to use this particular device, which ensures high-quality work.

There are two main types of glass cutters: roller and diamond types. Devices of the first type are suitable for working on a thinner glass plate, whose thickness is no more than 4 cm. The tool includes from 1 to 6 rollers. There must be a cutting line. Experts say that models with an oil reservoir have the best properties. They are great for both professionals and beginners.

Prepare the glass thoroughly before cutting, that is, wash it and degrease it. If you are dealing with a relief surface, then a diamond glass cutter will not be suitable for working on it. Cut such a plate, turning it over with the smooth side facing you. When cutting with a roller glass cutter, make sure that the line is completely covered with turpentine liquid.

After the glass has been cut, fix it using special glue. If there is no adhesive available, you can use suction cups to make furniture in the Provence style with your own hands, which are attached first to the leg and then to the glass.

If desired, you can decorate the table with your own hands with a variety of decorative elements, which will make it even more presentable and modern. View photos or videos on our website to understand how best to decorate a table on wheels. If you don’t understand any details, ask experts how to make a coffee table with your own hands.