The spinner is the most famous toy today. Popularity is growing every day, everything more people want to buy this toy. There is not a single person who has not heard of this simple invention. But many people want to make a homemade spinner so that it is unique.

Peculiarities

  • The toy perfectly develops finger motor skills in children;
  • Used as an anti-stress. Can relieve excitement, anxiety, excessive excitement, anxiety, etc.
  • May help get rid of bad habits: tapping on the table, biting nails, etc.

Principle of operation

The operating principle is quite simple: the most an important part toys - bearing in the central part. The speed and time of rotation of the toy depends on its quality.

You can play with this simple device with one hand: you need to grab the center with your thumb and middle (or index) finger and set the toy in motion by touching the wings of the spinner.

How to make it yourself

Due to the fact that this toy has such a simple operating principle, the shape and material of the spinner can be absolutely anything. The most common shape of this toy is triangular, but the possibilities of imagination in this matter can be limitless. You can make the toy square, hexagonal or rectangular. It all depends only on your imagination. You can freely choose the material from which this device will be made. It is possible to make a spinner from plastic, metal, wood, and even paper and cardboard. Before you start making a toy with your own hands, you need to make a drawing and prepare the central bearing: you need to wash all the grease out of the bearing if it is new. To do this, you can use WD-40 or regular solvent. This is done so that it can rotate freely.

Wooden spinner

First, prepare a drawing. You can find it on the Internet or make it yourself.

Wash the grease out of the bearing using WD-40 or solvent.

To make a spinner you need wooden plank equal in thickness to the bearing.

Using a wood saw or hacksaw, we saw off the excess pieces of wood along the lines.

The last stage of creating a wooden spinner is to sand the wood with sandpaper, insert bearings and paint it, creating a unique design for the toy. For painting you can use cans of paint, varnishes, and gouache.

Paper spinner

To begin, prepare four bearings (wash the grease out of one of them, as mentioned above), paper or cardboard, a drawing, a utility knife and glue.

Using a stationery knife, you need to cut out several shapes for the future toy according to the drawing. Next, glue all the shapes together and let the glue dry. Once the glue has dried, insert the bearings into the holes for them. We paint and give a unique design to the product.

You can clearly see how to make a paper spinner in the video:

Metal spinner

This is the easiest method to make this device at home. To do this, you need to prepare a central roller, glue, a compass and several metal parts. These could be nuts, screws, or even other bearings.

First, you need to draw an even circle on paper with a compass and make marks at the same distance. Draw the lines as shown in the picture

Place the roller in the center, and metal parts along the lines and glue them to the bearing. There can be as many parts as you like, but if you make a spinner from bearings or nuts, then only three parts will fit. The main thing is that they are at the same distance. The central roller can be decorated with coins, carefully gluing them to the bearing, or other small round metal parts. This spinner can be painted using a can of spray paint.

If you don’t want to buy spinners in a store, feel sorry for your hard-earned money, are too lazy to wait for delivery, or just have a creative impulse in your soul, then you can try to assemble the spinner yourself.

With equal hands, the toy will turn out no worse, and often even better than the one purchased - after all, you have invested a part of yourself in it.

How to make a spinner yourself

Method 1: make a spinner from bearings

We will need bearings, for example, from a skateboard. Before using the bearing in practice, it is necessary to clean it of grease, otherwise the turntable will rotate quietly, but not for long. This method is very simple, since we don’t have to make the spinner body; all we need are four bearings.

They need to be laid out in the correct shape. To make this shape accurately, use a squared notebook sheet. Once we have a perfect triangle, we glue the bearings together with glue - preferably superglue or cold welding.

Or you can draw a circle with a compass and divide it into 3 parts, like a Mercedes icon. Drawing and geometry lessons to help.

When the glue has dried, it is necessary to increase the gluing area, to do this we sprinkle the glue with salt, then the area will increase and the bearings will stick to each other better. At the end, we wrap the gluing areas with any thread and impregnate it with glue, this will give even more strength.

Several video instructions on how to make a spinner from bearings:

And another option without a rope:

2nd method: spinner with clamps

For the next method we will need two ties or clamps. They need to be inserted into each other. After this, we place three bearings in the center of the zip ties and tighten the zip ties until they hold tightly.

Cut off the protruding ends. In principle, at this stage, the spinner is already ready, but it does not hold firmly. If the turntable falls, everything will fly out of it. We don't need this, of course. Therefore, it is necessary to make it more reliable using glue. In all places where the bearings engage, where the ties touch the bearings, it is necessary to apply glue.

Such a spinner, due to its high degree of gravity, spins for less time and not as fast, but it is easier to manufacture.

To learn more about how to make a spinner with ties, watch the video:

How to make a spinner without a bearing

We will need: six plastic bottle caps, a toothpick, a large gel pen refill, coins and glue.

  1. First, take one of the covers and make a hole in it using a burner or soldering iron, or in extreme cases, a hot metal nail.
  2. Now we cut off a small part from the rod, about a centimeter long, and glue it into the cork.
  3. After this, we take two more plugs and cut off the top part.
  4. Then take a toothpick and cut off the sharp ends so that you are left with a stick about three centimeters long.
  5. Using glue, glue it to the top of the cork.
  6. After that, we pass it through part of the rods and glue the second plug. The middle plug should turn easily.
  7. Finally, we just have to glue the remaining three plugs.

To understand what it's all about we're talking about watch the video where it will be step-by-step instruction How to make a spinner from plastic bottle caps:

As a result, we have already got a pretty good spinner, but in order for it to spin even better, we need to make it heavier. For this we will use coins. Take a coin and glue it to each of the plugs. That's all, our spinner is ready.

How to make a paper spinner

1st method: from cardboard

We make a template for the spinner from cardboard using a plastic bottle cap.

  1. We circle it so that we get a triangle. We connect the circle with the rest of the circles with smooth lines and cut it out.
  2. Place the finished template on cardboard, trace it and cut it out.
  3. We also need four more circles of smaller size, let's make them.
  4. Now we need coins. We take them and glue them on the sides of the first half of the spinner, and glue the second half on top.
  5. Using nail scissors, make a hole in the center of the spinner.
  6. Next, we need to cut off about a centimeter of the rod from the handle, and make small holes in two small circles.
  7. All the parts are ready, now you can paint our spinner with paints to give it a more beautiful look.
  8. Now we assemble our spinner from the resulting parts. We insert the axle into one circle and seal it, insert it into the spinner and press it on the other side with another circle.
  9. Glue the remaining two circles on the sides. That's all, a homemade paper spinner without a bearing is ready.

To understand the details, watch this video:

Method 2: paper spinner

To make such a spinner, we will need two square sheets of paper and two push pins. The assembly diagram will look like this:

We advise you to immediately watch the video, otherwise the instructions may seem too complicated:

  1. Fold the sheet in half, then open it, like a book, fold both sides of the paper towards the bend.
  2. Next, we fold the resulting rectangle again and get an even smaller rectangle.
  3. Fold the resulting figure in half to create a bend. Then we open it and place it vertically.
  4. We take it from the lower left corner and move it to the right side. You should get a figure similar to English letter L.
  5. We repeat the same with the other part of the paper, only now we bend it to the left.
  6. From the resulting shape, bend each corner so that you get two triangles at two ends.
  7. We make a diamond out of the resulting shape, run our fingers along the curves several times and open it back into the previous shape.
  8. We repeat the same with the second sheet of paper, only at the folding stage we make the folds in the opposite direction.
  9. We connect the two resulting figures together. We place one vertically, the other horizontally on top. We tuck the corner of the vertical fig into the corners of the horizontal one. As a result, you should end up with a figure that looks like a shuriken.
  10. Now we make a hole in the center of our star using a pushpin so that it can easily rotate.
  11. Now we take the second button, heat the iron tip and take it out. We put on the remaining cap on the other side. The spinner is ready.

More interesting articles.

The spinner is a newfangled children's educational toy that in a matter of months has become incredibly popular all over the world.

She received the attention of not only children, but also adults. The cost of a spinner varies greatly, depending on the materials and the number of components.

In this article we will tell you how to easily make a toy with your own hands at home.

Positive qualities of a spinner

There have been and are many debates about the benefits of this toy, which have never come to a common conclusion.

However, many recognize that the spinner has a number of positive properties.

For example, it calms in tense situations.

This means that it helps cope with mental and nervous tension.

For many, a spinner helps to concentrate attention, and, of course, develops motor skills.

Also, many note that the spinner becomes an excellent alternative to bad habits.

Paper

Paper is the most readily available material possible.

You can use cardboard to add density. But even from them, a spinner can be created in two ways.

The first one is origami. To make it you will need two square sheets of paper and two regular pushpins.

To begin, fold the sheet in half and unfold. You should have a clear line in the center.

Bend the edges towards it. When you unfold the sheet, you should see three clearly defined lines.

We begin to bend the corners. On one piece of paper, fold the top left and bottom right corners, on the second, on the contrary, fold the top right and bottom left.

We put the figures one on top of the other. Tuck the corners of the vertical figure into the corners of the horizontal one. This way you will get something similar to a shuriken.

The spinner is ready!

The second method is not so sophisticated. Having drawn it yourself or downloaded a template on the Internet, using regular and nail scissors, carefully cut out the design along the borders.

It is important that the diameter of the bearing holes is slightly smaller than the diameter of the bearing itself. Use glue for soldering.

The more there is, the better. This will give your spinner extra density. After gluing, all that remains is to paint the toy in any color.

Bottle caps

This material is also one of the simplest.

In addition to bottle caps, take bearings.

First, think over the model, because the amount of materials depends on it.

The simplest one, with three blades, includes 4 plugs and the same number of bearings.

You will also need a glue gun, a knife, sandpaper and a drill. Sand the plugs first.

This will remove all roughness and unevenness that will later interfere. Cut a hole to fit the bearing.

Following the design idea, place the plugs around the center at the same distance. Glue them together with honey.

The remaining bearings are fixed in the remaining plugs, and the spinner is decorated with a marker, stickers or paint.

You can also make a spinner from bottle caps without bearings.

Tree

For craftsmen working with wood and a jigsaw, this offers a great opportunity to create a toy that will hardly differ from the product in the store.

The main thing is to think over the model, and after manufacturing, carefully process the spinner.

Apply a paper blank, handwritten or downloaded from the Internet, to the tree and trace it with a pencil or pen.

Saw and sand the toy. To get a hole for the bearing, drill it from one side to the middle, and then turn the part over. The thickness of the material must match the thickness of the bearing.

A spinner is a toy that attracts not only children, but also adults. You don't need to spend money to buy it.

Make a spinner yourself and enjoy the simple game.

The spinner is a very popular thing among teenagers and adults. It helps to concentrate thoughts, relax, and relieve psychological stress. You can buy a spinner in almost any store, but it is much more interesting to make it yourself. Below are instructions for assembling different spinners with your own hands.

How to make a spinner with your own hands - a simple spinner

In order to make a simple one with your own hands, you will need the following materials:

  • 5-6 bearings.
  • Ties.
  • We spread the bearings lengthwise, pressing them tightly against each other.
  • We connect 3 ties in the shape of a triangle.
  • We put the resulting figure from the ties onto the bearings.
  • We tighten the bearing on one side so that they fit the bearings tightly. We cut off the protruding tails. The resulting structure should look like caterpillars.
  • We take 2 more ties and tighten them vertically, along the edges of the second bearing. We cut off the protruding tails.

The spinner is ready.

How to make a spinner with your own hands - a star spinner

In order to make a star spinner with your own hands, you will need the following materials:

  • 4 bearings.
  • Super glue.
  • Threads.
  • Sandpaper.
  • Soda.

We perform the following simple steps:

  • We arrange the bearings as follows: two vertical bearings are pressed tightly against each other, the remaining two are on the sides of the second vertical one.


  • We clean the spinners with sandpaper in the place where we will glue them.
  • We glue the spinners in the shape that we set initially, sprinkle the gluing areas with soda for greater strength.


  • We wrap the joints of the bearings with threads.


  • We also put super glue on the threads to prevent them from unraveling.
  • The spinner is ready.


How to make a spinner out of wood with your own hands

In order to make a spinner out of wood with your own hands, you will need the following materials:

  • A piece of wood.
  • Drill.
  • 3 bearings.
  • Sandpaper.
  • Pencil.
  • Saw.

We perform the following simple steps:

  • We place three bearings on a piece of wood, at an equal distance from each other.
  • We outline the bearings with a pencil.
  • We connect the resulting circles so that we get a figure with the shape of a caterpillar.


  • We step back half a centimeter from the caterpillar and draw the shape of the future spinner.
  • We drill circles with the expectation that the bearings will sit tightly in them.
  • Cut out the resulting shape.


  • We clean the resulting shape with sandpaper, getting rid of sharp corners and splinters.
  • We insert the bearings.

The spinner is ready. If desired, you can always paint it any color using a spray bottle.


The Rubik's cube is already a thing of the past. Today's kids are obsessed with pocket-sized toys that spin around. Children are so captivated by fidget spinners that some schools have already banned bringing them with them. On the other hand, toys help relieve stress and calm children who have a special temperament.

Fidget spinners are now collectible and have something of a status status. No child wants to show up at school without the most basic gaming device. If you're on a budget and want a great toy that really stands out from the crowd, there's a simple solution: you can make your own spinner.

There are a few in various ways make a spinner, for example, cut it out of cardboard or use old recycled lighters. However, if you try this at home, be aware that the fidget spinner may cause damage to your skin. With that said, there are simple methods. The choice is yours.

How to make a spinner using plastic bottle caps

To do this you need: 4 plastic caps, a box of cereal, a knife, super glue, a plastic mug, paint or glitter

Collect four bottle caps. Take four plastic lids from used bottles that are the same size. Glue them together so that all sides meet the middle cap, and then bend the hole in the middle bottle cap with a toothpick.

The weight of the glue inside the caps. Some people prefer to glue pennies to the inside of the caps for added weight, but household items such as magnets will work equally well.

Replace bearings with paper. Place the bottle cap over the plastic cup and cut out a circle. Once the circle is cut out, punch a hole the size of a toothpick and place a plastic circle on the inside of the bottle cap to line the empty space. Then take a penny draw 10 circles on the box and cut them out.

Make sure all holes line up with each other; this will be an important step towards spinning the spinner correctly.

Glue the circles together. Stick your toothpick in each circle and glue the five cardboard circles together, lining up the small holes. Take two more penny circles and this time avoid punching a hole through them and glue each circle to one side of each five.

Attach all the parts together with glue. Take a toothpick and one stack of cardboard circles and glue the toothpick in the middle. Attach a toothpick to the center of the middle bottle cap and cut off the end. Leave a little toothpick on the opposite end and glue that end in the middle of another stack of cardboard circles to act as a bearing. Your spinner should now spin like the original.

Decorate your creation. Now that your spinner is almost ready, paint or adding some sparkle to your toy will complete the job.

How to make a spinner using skateboard bearings

Materials needed: plain bearings, knife, thick rubber band, super glue.

  1. Assemble three skateboard bearings. Take the three skateboard bearings you have chosen and align them together horizontally. Take the middle bearing and pull out the middle tread with a knife to expose the inside of the wheel.
  2. Glue them together. Glue the three bearings together in a straight line with super glue and wait until they dry.
  3. Cover with rubber band. Wrap a thick rubber band around the outside edge of the three support bearings for support, and decorate the rubber band if you want to add some character to your new toy.
  4. Can be done spinner alternative, which looks more like a traditional spinner. You need to assemble four skateboard bearings and follow all the same steps. The middle bearing will have an open wheel, and the other three should be glued proportionally, around the center.
  5. Once your feeder is complete, place thumb and your middle finger into the center of the toy and release the stress of life.

How to create a paper spinner

What do you need for this:

  • Cardboard.
  • Scissors.
  • Safety pin.
  • Toothpick.
  • Glue.
  • Stickers.
  1. Cut the cardboard into four small circles and one propeller shape.
  2. Poke holes in the center of each of the circles and the propeller using a pin or pointer.
  3. Apply a spot of glue to the back of one of the circles and insert a toothpick through the hole. Add a second circle to the toothpick and press the pieces of paper to seal the glue and attach the pieces to a toothpick.
  4. Add the propeller to the toothpick.
  5. Repeat step 3 with the remaining two circles, leaving about 1/4 inch between the first set of circles and this one (the propeller needs room to spin).
  6. Remove excess toothpick ends from spinner and decorate with stickers.