Laying tiles diagonally has some advantages, before the usual (generally accepted) facing method:
Diagonal layout of tiles on the floor.
- If a narrow trimming occurs under the wall, the triangular pieces look more naturally and the mee is noticeable. Oblique, narrow pieces with chess (usual) cladding, constantly attract a look.
- When laying the porcelain stoneware of one drawing in several adjacent rooms, the geometry of the premises does not affect the seams and the layout of the tile at the walls. The location and shape of these rooms may be any configuration and tile on the floor will look natural.
Laying tiles diagonally.
Diagonal laying Tiles in two adjacent rooms.
- When lining two adjacent rooms with outdoor tiles with different color and pattern, there is an opportunity to play by contrast on the door line. This can be done by placing the tile on the floor in the same room diagonally, and in other straight rows.
Contrast when laying tiles in various ways
I am not alone in my arguments about the ability of tiles, laid rhombus on the floor, hide disorders in the geometry of the premises:
Technology laying tiles on the floor diagonally.
There is an opinion that in order to put the tile on the diagonal, then the floor must be diagonally and on these lines begin cladding.
Such a condition is possible only in one case. If the room is square in terms of. That is, the parties are the same, and all corners indoors are 90 degrees.
There is a simpler way to glue the tile diagonally. To do this, you need to cut several tiles exactly diagonally and start facing using these oblique halves. The first whole 4-5 tiles put in square will give one smooth side. It must be taken for the basic. Align, if it did not get a straight line, the wedge. And in the future, continue the straight twin cord or laser beam. At some stage (plot), you can reproduce a straight angle on it, and already lead all further laying according to this corner. This will help get smooth rows of seams even on non-calibrated tiles.
technology laying tiles on the floor diagonally.
Filling the space with whole tiles, trimming can be done the next day. These triangular pieces are no longer affecting geometry and layout.
Where to start laying diagonally.
The impracticity of the cladding on the floor, diagonals in the fact that you have to start with an angle or any wall. But the most prominent place is often the passage of the room and the doorway without a threshold. In this place is usually found, two different coatings. If you begin to glue a tile from the corner, you can get a kaleidoscope of pieces on the aisle.
The beginning of the facing diagonally
Therefore, the layout technology of the tile in the diagonal "diagonally is a bit different. Stying begins with aisles and sites that will not close with furniture or equipment.
Diagonal tile on the passage.
In arbors of the wrong shape, when laying diagonally, perimeter, better, bypassing the whole tile. And the middle fill, then already, diagonal rows.
Tile diagonally in the gazebo.
This will help to avoid the appearance of pieces on the edge of the site and the formation of a cut-out, not always level edge. Little segments are poorly held, especially on the edge of the steps or sites. Whole line Tiles around the perimeter, also creates a visual frame. And the frame in the design is always a winning option. Be it a frame or the frame of the ceiling frieze.
Where to start laying tiles diagonally in the garage on the floor shown
How to measure and cut off the tile on the diagonal.
In the West for this incident, various devices facilitating the procedure are invented.
Fixtures for measuring porcelain stoneware
But, often, it's all a fuss in a scratch. There is nothing easier than directly on the tile, mark the pencil on which there should be a hand-made or electric stovet.
Bole is clear this idea in a short video. All videos are short. Without entry and philosophy. Main essenceSupplementing text on the site.
The complex parts of the tile trim are easier to do with a preliminary workpiece of a paper stencil.
Details below:
Counting tile consumption diagonally.
Before, in the article on It has already been said that the consumption of tiles diagonally is the same as when ordinary styling is 7-8 percent. And this figure depends on the size of the tile itself and the presence of a complex pattern representing a set of several tiles. Than less tileThe less the percentage it goes on trimming.
Price (Rates) on laying tiles diagonally.
It is customary to consider this method of laying as high complexity. Therefore, the cost of this work is somewhat higher than in the usual way. The appreciation can be expressed 1.2 – 1.3. This value may vary and depends on some incomprehensible accidents, currency oscillations and the traditions of a particular area.
You can make the interior with interesting and original by laying tiles diagonally on the full and original look tilelaid on the floor diagonally. It will not only emphasize the individuality of the design of the room, but visually increases the space, giving it an additional volume. Laying outdoor tiles diagonally - painstaking work, requiring patience and skill. Such cladding will hide the wrong geometry of the room, will win winning small space And give the room a stylish look. By placing the floor with your own hands, you can save a significant amount and get a planned composition.
Laying tiles diagonally
The method of laying elements diagonally differs slightly from the standard method. This process is more complicated and the consumables will be required slightly more, as it will be necessary to cut the tile to comply with the diagonals. In any case, facing has its pros and cons.
Many prefer to lay outdoor tiles diagonally, because in this way you can visually increase the space indoors
Tile layout ROMBB has its advantages:
- Visually expands the space of the room due to the rotation of the elements;
- It looks much more spectacular than the standard option;
- Masks perimeter defects and smoothes visible irregularities;
- Narrow trimming, arranged diagonally look more naturally than when ordinary laying.
The location of the tile diagonally will take more time due to cutting the elements, and will also increase its consumption.
Tile diagonal on the floor: Marking methods
Everything repair work Start with purchasing essential materials. You need to calculate the required amount of tiles. To do this, it is recommended to draw a circuit and calculate entire details and cropped items. To avoid a deficit of the material, this quantity should increase by 5-10 percent. For further work, you will need: packaging for adhesive solution, level, spatula gear and rubber, stovetur or bollard, plastic cross, molding, tile glue, grouting for seams. Before starting work, it is necessary to prepare the surface of the floor. To do this, dismantle the old coating, remove the garbage, eliminate irregularities. If the floor with significant differences make a screed.
Be sure to go through the primer on the floor surface, this method will improve adhesion of glue, and the tile will last for a long time without requiring repair.
When the perfect surface is created, it is necessary to properly place it for laying the tile. You can lay out the diagonal tile on the diagonal 2 ways from the center of the room and from its corner. In the first case, you need to determine the central point. For this, there are two direct from the opposite corners, the intersection area will be the center. If the room is square, the diagonal line will become the main markup at which the floor can be stacked.
Article on the topic: Warming of loggia and balcony under the room
Before laying the tile diagonally, first need to properly put markup on the floor
The second option is resorted when the room has a rectangular shape. Several tiles are cut diagonally on triangles and begin to lay out on the floor from the angle. Having performed the drawing, outlined the laying line, then proceed to the main work.
There is a more complex way, which is also starting from the center of the room. To do this, find the middle of the floor by the method of perpendicular crossing of two direct. Through the center, they make a line at an angle of 45 degrees relative to these lines, which will serve as the main markup. It is necessary to clearly designate a strip for the first row, you can pull the construction cord that will become a guide. Before starting work, experts are recommended to decompose the elements by creating the desired drawing, and evaluate the result obtained from the threshold of the room.
Process laying tile rombus do it yourself
Laying tile diagonally is performed in several stages. First you need to dissolve the adhesive solution, according to the instructions.
Conduct the laying of the tile romb quite independently, the main thing - to perform all the actions strictly according to the instructions
Stages of work:
- The first tile is necessary in the center of the floor so that the angle is at the central point, and the edge corresponded to the diagonal and coincided with the installed markup.
- On the basis of the floor and the wrong side of the element, glue with a toothed spatula and apply a tile to the floor.
- After the right locationThe established element must be spacing a rubber image so that over the edges there are excess glue. This method will avoid unnecessary voids.
- Next, using the level to check the horizontal position of the tile, if everything is done correctly, the bubble in the instrument will be strictly in the middle.
- Subsequent elements are necessary to diagonal to the corner of the room. Then return to the beginning of work and continue the laying in the opposite direction. As a result, a solid diagonal line should be obtained.
- When the first one is trying, the following integer elements begin to lay.
Article on the topic: Wall mural for the hallway
Each row must be checked with a horizontal location. Crossings inserted between tiles seams will help to accomplish the accuracy and flattering masonry. The next stage of the work becomes a trimming of elements with tiles or a grinder. To do this, the pencil note the necessary feature on the tile, the cutting tape is glued along the cutting line to avoid chips, and carefully work with a cutting tool.
When all elements of the porcelain stoneware are laid down to grouting seams. For this, the tile is cooled well, the seams are cleaned from glue and crosses, and allow adhesion with adhesive-based 2 days. After dilute the grout, and press the spatula in the seams. Excess the mixture is removed immediately, if the grout dries, the defects will be fixed difficult. The facing laid out in this way will allow to hide the disadvantages of the room, visually expand its volume and effectively reflect the unique design.
Diagonal laying of tiles with displacement and inserts
Not only square elements of floor tiles can be used, but also rectangular options laid diagonally with displacement. When the long side of the tile leans half the other element. Such options perfectly hide the tile defects and help to eliminate the poor geometry of the floor and walls. There is also laying of elements diagonally with inserts. Such a technology is comparable to a mosaic, additional materials can be both small parameters and sizes with a tile.
Beautiful and unusual in the interior will look at the floor tile with displacement and inserts
Technology laying tiles with inserts diagonally similar technique calculation rhombus:
- There is a center of the room, the corresponding markup is made;
- On dry floor, you need to decompose the future drawing, inserting cross between the plates;
- Mark the right direction by pulling the beacons;
- Treat the surface of the primer;
- Milk mass;
- Share whole elements according to the planned project;
- Cut and lay the missing small parts around the perimeter of the room;
- Lose seams.
Laying the tiles diagonally is one of the ways to bring the feeling of originality in the residential premises. The tile laid in this way visually will expand any space, making your home more. Before laying a diagonal tile, you must remember a few simple rules: Floor preparation - Paul in a new room, which has never been carried out to alignment, will most likely be with flaws. In order to correct this, first of all it is necessary to remove large protrusions and pour cement mortar Cracks. Next, it is necessary to estimate the degree of surface irregularity and determine the volume necessary work. If the height differences do not exceed 30 mm, then it will be possible to do a self-confined screed. With differentials up to 100 mm, the cement-sandy mixture is required, and more than 100 mm must be used clamzit in order not to load overlaps. Changing the next stage of preparation after cement strainer Fully dried. Its degree of drying can be checked using a polyethylene film that it is necessary to cover the surface of the floor for the night. If in the morning, on the side of the film, which lay on the screed, moisture was made, then the cement is not dry and need to wait. The next step of preparation may be waterproofing, but it is optional. Marking and laying of tiles - after the floor has become smooth, clean, and the screed is completely dried, you can proceed to markup. To do this, you need a marking cord that can be purchased in any construction or economic store. If there is a desire to save a little, then such a cord can be made independently at home. To do this, you will need to take a strong elastic rope and carefully grate it with a piece of chalk, after which the marking cord can be considered ready. In order to mark the cord, it is necessary to stretch along the floor between two diagonal angles of the room. Capping the ends, it is stretched up and discarded sharply. Having hitting the floor, the cord will leave the painted line. The same must be done with two remaining corners. The lines intersecting in the center of the room and will be marked for laying tiles diagonally on the floor. The next step, after marking, should go a preparatory layout of the tile diagonally on the entire floor surface. This is done in order to set the order in which it will need to be uploaded to create a diagonal pattern. The diagonal layout of the tile begins with the center of the room where the markup lines crossed. One of the corners are selected, where it is necessary to put the first tile, and then we continue to spread the entire diagonal to the wall. In the same way it is necessary to lay out the second diagonal. After that, lay all the tile on the floor, filling the remaining space between the diagonals. That tile, which will be at the wall, it will be necessary to cut to the necessary form and size. The unfolded tile before it is removed, it is necessary to numbered for convenience in further work. Diagonal laying of tiles on glue is the most responsible moment, which in case of error corrected without loss of the tile will be impossible. How to put a tile on the glue to prevent errors? To do this, the tile adhesive solution is prepared in the required volume. For gluing tiles on the floor diagonally, you can use different kinds glue, their choice depends on the intensity of the operation of the future ceramic coating and personal material opportunities. Adhesive for tile can be conditionally divided into three types: cement-sand mixture, adhesive mastic and dispersed adhesives. They differ in price, drying rates, consumption, composition, pre-training method and other indicators with which you can read by reading the characteristics of the product on the package or consulted with the seller. Laying the diagonal tiles is performed in the same order in which it laid out when marking. To apply an adhesive solution, it is best to use a toothed spatula. The solution should be applied both on the back of the tile and on the floor surface, which will provide a better coupling. It is necessary to ensure that the tile is laid on the same level and did not perform one above the other. If suddenly it became necessary to adjust the height, then this can be made by non-tapping tapping with a rubber hammer. Laying ceramic tile The floor requires defined experience And if there is no confidence that the laying of tiles on the floor via the diagonal will pass without errors, it is better to resort to the help of a specialist. Statting of the seams - after laying the tile on the floor is complete and it glued reliably, it is necessary to proceed to the grout. This uses special dry mixes that can be purchased at any construction store. A method for preparing grouting to use will be listed in the instructions on the package. Cold mixtures can be divided into two types. The first includes those that are used for seams with a width of no more than 5 mm. The second type includes grouts used for seams with a width of more than 5 mm. Their difference lies in the fact that in the wiping of the second type to the mixture of cement and additives additionally added sand necessary to reduce shrinkage and prevent cracking. In stores you can see the grouts based on synthetic resins, but their price will be higher than cement. Before starting work on the grout, it is necessary to clean the intercutric seams from glue. To do this, you can use the usual kitchen knife or spatula. The resulting solution is rubbed into all the joints between the tile using the rubber spatula. Before rubbing the seams, it is recommended to moisten with water to prevent shrinkage and cracking drying. The flap color must be selected according to the color of the tile. In the event of a solution from entering the already laid ceramic floor, it must be immediately removed while it does not dry. On this laying of floor tiles diagonally is considered completed.
Unusually and originally, tile laid on the floor diagonally. It will not only emphasize the individuality of the design of the room, but visually increases the space, giving it an additional volume. Laying outdoor tiles diagonally - painstaking work, requiring patience and skill. Such a cladding will hide the wrong geometry of the room, a small space will win and give the room a stylish look. By placing the floor with your own hands, you can save a significant amount and get a planned composition. The method of laying elements diagonally differs slightly from the standard method. This process is more complicated and the consumables will be required slightly more, as it will be necessary to cut the tile to comply with the diagonals. In any case, facing has its pros and cons. Tile layout ROMBB has its advantages: The location of the tile diagonally will take more time due to cutting the elements, and will also increase its consumption. All repair work begins with the purchase of necessary materials. You need to calculate the required amount of tiles. To do this, it is recommended to draw a circuit and calculate entire details and cropped items. To avoid a deficit of the material, this quantity should increase by 5-10 percent. For further work, you will need: packaging for adhesive solution, level, spatula gear and rubber, stovetur or bollard, plastic cross, molding, tile glue, grouting for seams. Before starting work, it is necessary to prepare the surface of the floor. To do this, dismantle the old coating, remove the garbage, eliminate irregularities. If the floor with significant differences make a screed. Be sure to go through the primer on the floor surface, this method will improve adhesion of glue, and the tile will last for a long time without requiring repair. When the perfect surface is created, it is necessary to properly place it for laying the tile. You can lay out the diagonal tile on the diagonal 2 ways from the center of the room and from its corner. In the first case, you need to determine the central point. For this, there are two direct from the opposite corners, the intersection area will be the center. If the room is square, the diagonal line will become the main markup at which the floor can be stacked. The second option is resorted when the room has a rectangular shape. Several tiles are cut diagonally on triangles and begin to lay out on the floor from the angle. Having performed the drawing, outlined the laying line, then proceed to the main work. There is a more complex way, which is also starting from the center of the room. To do this, find the middle of the floor by the method of perpendicular crossing of two direct. Through the center, they make a line at an angle of 45 degrees relative to these lines, which will serve as the main markup. It is necessary to clearly designate a strip for the first row, you can pull the construction cord that will become a guide. Before starting work, experts are recommended to decompose the elements by creating the desired drawing, and evaluate the result obtained from the threshold of the room. Laying tile diagonally is performed in several stages. First you need to dissolve the adhesive solution, according to the instructions. Stages of work: Each row must be checked with a horizontal location. Crossings inserted between tiles seams will help to accomplish the accuracy and flattering masonry. The next stage of the work becomes a trimming of elements with tiles or a grinder. To do this, the pencil note the necessary feature on the tile, the cutting tape is glued along the cutting line to avoid chips, and carefully work with a cutting tool. When all elements of the porcelain stoneware are laid down to grouting seams. For this, the tile is cooled well, the seams are cleaned from glue and crosses, and allow adhesion with adhesive-based 2 days. After dilute the grout, and press the spatula in the seams. Excess the mixture is removed immediately, if the grout dries, the defects will be fixed difficult. The facing laid out in this way will allow to hide the disadvantages of the room, visually expand its volume and effectively reflect the unique design. Not only square elements of floor tiles can be used, but also rectangular options laid diagonally with displacement. When the long side of the tile leans half the other element. Such options perfectly hide the tile defects and help to eliminate the poor geometry of the floor and walls. There is also laying of elements diagonally with inserts. Such a technology is comparable to a mosaic, additional materials can be both small parameters and sizes with a tile. Technology laying tiles with inserts diagonally similar technique calculation rhombus: After completing the work, it is desirable to dry a ceramic surface for several days. In the same way you can post the wall in the bathroom, kitchen or toilet. Ceramic floor laid diagonally stylish room, durable coating and effective method Hide flaws of building structures. Laying tiles on the floor diagonally allows you to beautifully beat the room, especially in conditions of small dimensions. Consider what subtleties and nuances are taken into account with such a scheme. Common location of the tile Pay attention to the fact that you use both square elements and rectangular. Advantages of diagonal layouts: Disadvantages of diagonal calculation: Laying diagonally has both pros and cons The main complexity in diagonal laying is the use of a large number of rifled elements. This is also reflected in the installation process, and on the calculations. To calculate the number of tiles, draw a layout plan on paper compliance with scale. First, consider the whole fragments. After noting the details that will be cut half and more. Consider them as a whole tile. Then pay attention to the number of fine rifle parts. Some will be covered as one tile. The final number will increase by 10-15% to avoid deficit due to errors in counting or the presence of marriage. You will also need the following materials: List of tools and materials Before laying the tile, the surface must be aligned. Use self-leveling filler floors. Dry cement mix Diluted with water and evenly distributed along the horizontal surface with a needle roller. A few days later, proceed to further work. In order to align the floor before laying the tile, it is best to use self-leveling mixtures The real problem becomes irregularities on the walls. On the diagonal calculation, the presence of bugs is especially noticeable. To eliminate minor defects, it is enough to apply a putty mixture. If the skews are serious, it is not necessary to do without a lifting of the perimeter of the room plasterboard sheets. But so you facilitate yourself cladding of walls by any of the materials. To improve the tile grip with a floor, a special primer is applied to the surface. To fill the small pores, use the optional method: after drying the basic primer on the floor, a liquid solution is poured tiled glue and is distributed with a thin layer of less than 1 mm. After that, perform marking. A specific technique depends on the selected method of installation. As a landmark, find the center of the room and output a smooth perimeter. Then spread the tile without glue and calculate the control points. Diagonal tiles are pasted according to a special principle. If, in the case of direct schemes, the rows are moving in almost any direction, it is important to constantly observe the diagonal. Two main options are available: from the center of the room and from the corner. Types of laying tiles on the floor If the main area is focused in the center of the room better use the first option, as it allows you to preserve the proportions and symmetry. To mark the zones, determine the central point of the landmark. If you usually carry out lines from the middle of the walls, in this case the angles of the room are used. At the place of intersection will be laid the first tile. The room is eventually divided into four triangles. Mounting is made by diagonal rows within the same sector with their gradual merge. If you chose the second way - from the corner, then start with the laying of triangular parts. For this, the tile is collected in half diagonally. Each subsequent row begins with a rifled element. The glue is applied by a comb spatula into small sections of the floor or the tile itself. It is important to observe the seams and a strict horizontal. The level is used to check. With perfect smooth walls And the rules comply with you will be able to cover with the same tile segments throughout the perimeter.
Floor preparation
Laying
Tile diagonal on the floor: Marking methods
Process laying tile rombus do it yourself
Diagonal laying of tiles with displacement and inserts
Laying tiles on the floor diagonally (video)
Pros and cons of diagonal layouts
Necessary materials and tools
Floor preparation and markup
Technology laying
