Comfort and coziness in an apartment primarily depends on the furnishings of the premises. Stylish design, current color scheme and functionality are the requirements of modern consumers. In a catalog with extremely easy navigation of a specialized online store, the user can choose a set, guided by financial capabilities and taste preferences.

Modular furniture for the bedroom provides unique opportunity arrange a set for a specific room with specific dimensions. Any client can order a set of items that he needs.

Inexpensive modular bedroom furniture: advantages of products

Modular bedroom furniture, the price of which depends on the materials of manufacture and performance characteristics, has many advantages:

  • the choice of individual modules of a single style direction allows rational use of the available space;
  • Buying modular bedroom furniture in the Unique Furniture online store is recommended for those who want to zone the area of ​​the room;
  • one or more modules can be replaced at any time;
  • it is possible to choose the number of modules and those types that are really in demand among consumers;
  • high-quality modules offered in the catalog are reliable, practical and durable;
  • a large selection allows you to buy modular bedroom furniture in Yekaterinburg to create a unique and stylish interior, improvising and realizing the most daring design fantasies.

To receive the necessary high-quality advice, you can call the specified phone number and contact experienced and competent dispatchers who will give answers to all your questions and valuable advice. In our virtual store, every consumer will be able to purchase elegant, beautiful and practical interior items that will give an atmosphere of harmony and the necessary comfort for many years.

Rainwater is drained from the roof using gutters that provide building structures with protection from negative influence rain and melt water. The installation of drains prevents possible flooding of the foundation, collapse of blind areas, and damage to the façade of structures.

A drain is a system with pipes and gutters, which are fastened with various fasteners, including couplings and connectors.

In addition to their protective functions, today's roof drains often become decorations for the facades of building structures.

Types of metal drainage systems

To make metal drainage systems, manufacturers use galvanized iron with a possible additional polymer coating layer, as well as copper, aluminum and a titanium-zinc compound.

Sample of installed drain

The most low-cost method is galvanized steel gutter. True, galvanized steel has a significant drawback, which is expressed in low corrosion resistance. To extend the life of a galvanized metal drainage system, it is coated with polymer substances - plastisol and pural. In addition, these polymers make gutters part of decorative design facades.

One of the most expensive and durable is the water accumulation drainage system, which is made of copper.

In addition, if copper is covered with a layer of patina, the period of its operation increases, the entire drainage structure acquires sophistication and solidity. Copper gutters are often installed when installing tiled roofs. The most difficult thing is to install welded and welded radius gutters along the perimeter of house facades.

If titanium and zinc alloys were used in manufacturing, then such drainage structures are covered with a naturally formed patina, in other words, alkaline zinc carbonate.

The service life of such drainage can exceed a hundred years. True, there is only one condition for maintaining such durability - under no circumstances should it come into contact with copper and iron parts, otherwise this may cause electrocorrosion.

Specifics of installing metal gutters

There are several ways to help you drain your roof yourself.

  • Using a double overlap in the drain system will help to reliably seal the joints between the slope and the wall. For water equipment drainage system For roofs with a slope, the angle of inclination of which exceeds 30 0, corners and covering ebbs are used. For the corners, plates are used that are bent at an angle of 90 0. The part that is placed on the tile covering must have a minimum width of 10 cm, the vertical part must be 7.5 cm. The drain corner must be installed while laying the tiles or slate. The vertically directed section must be pressed against the wall, then covered with a stepped drain. Then the upper edge of the corner is bent to place it in the seams between the masonry, after which it is secured with wedges and jointed with cement mortar.
  • Installation of drains on a roof covered with profiled tiles is possible using a single overlap. One edge needs to be inserted metal sheet into the seam between adjacent masonry, the other must be lowered onto the roofing and placed over the next edge of the ridge.
  • It is possible to obtain drainage of the valleys. In some tiled roofs, water drainage is carried out through grooved tiles, but the most common method is to attach a metal drain gutter to the plank flooring. The sides are formed from these slats; they should be framed with a sheet. Gutter gutters discharge water runoff through parapet or eaves drains.
  • To seal the edge of the top of the roof structure at the junction with the wall, you need to use apron drains. The edge of the sheet is inserted into the seam between the masonry two rows higher than the roof covering. The width of the drain applied to the roof covering is about 150 mm.

Installation of plastic and cement drains

PVC roof drains They are in an affordable price category, have a long service life and are easy to assemble. People involved in simple developments give them the greatest preference.

Equipment plastic drain consists of the following:

  • pipes,
  • connectors,
  • corner fasteners,
  • fasteners,
  • pipes,
  • gutters,
  • couplings,
  • funnels

Gutters can have a rectangular or round shape. The video shows the installation of round plastic drains:

When you need to install a drain yourself, you need to pay attention to the more complex installation of rectangular pipes. However, the rectangular shape of the drainage system gives the external appearance of the buildings a modern appeal. Wide choose color version allows you to choose plastic that matches the color of the roofing.

Drain installation diagram

If the gutters have a square profile, then they are recommended for areas with frequent and heavy rainfall due to the provision of the best drainage.

PVC drain components can be connected with an adhesive connection or elastic rubber connectors. On Russian market preference is given to “Molecular Welding” glue. It reliably connects all closures and joints.

Rubber connectors, on the contrary, quickly age and lose their quality. The joints are not tight; over time, they become filled with leaves and debris, which leads to disruption of the functions of the drainage system.

Reliability and strength of the gutters is ensured by stiffening ribs, which have plastic roof drains.

  • If the drainage technology is not followed, not a trace will remain of the high level of its operational characteristics.
  • fastenings are installed with a maximum step of 0.6 m;
  • the function of one drain is designed to serve a maximum roof area of ​​100 m2;
  • the slope of the drainage pipe at each 1 m is 0.5 cm;
  • when connectors, funnels, corners are installed, the location of the closest fasteners is up to 5 cm;

To avoid water leaks onto the roof, a drainage slope of 0.5 cm should be directed away from the wall.

The advantages of a cement roof drain system are: reliability, easy assembly and low price. But there is also a drawback: over time it shrinks.

This drainage system is not popular among Russian builders. Most often, they are the property of old houses with a pitched roof, where the drainage is sealed with cement and tile plates are laid on top.

Regularity of drain cleaning (video)

Clearing debris from drain Well-chosen structural details

and the installation carried out guarantee the working order of the drainage system. However, many people forget or simply do not pay attention to the fact that roof drain cleaning should be done regularly, especially in the fall.

  • Although modern drainage systems are made in such a way that they do not require any painting, other means to protect the drainage from corrosion, or any other maintenance. In order for the system to serve for a long time, it must be transported, installed and cleaned correctly and carefully, otherwise the drainage coatings have a chance of becoming scratched.
  • You can maintain the productivity of your drainage system by installing an anti-icing structure with cables, temperature and humidity sensors.
  • Interesting way to serve drainage systems- a specially designed robot. It ensures efficient and safe cleaning of gutters located very high above the ground. The robot moves back and forth, can recognize and analyze the characteristics of contamination, count the number of required passes and the frequency of cleaning.

This video shows how draining rainwater from a roof is cleared of blockages using a special device:

To maintain the attractiveness of the facades of houses, to prevent the blind areas from collapsing and the formation of flooded and wetlands, one should not neglect the rules of transportation and installation, and especially the periodic cleaning of the drainage system.

Roof drains: cost, installation and installation of drains with your own hands


Roof drains: made of plastic and metal. How to install them yourself? What is the frequency of cleaning for blockages?

How to install a drain in the bathroom with your own hands - detailed instructions

Correct installation of a bathroom drain with your own hands allows you to reduce to a minimum the possibility of overflowing the water bowl in the water treatment room. It is necessary to maintain order in this area, since water can fill the bathtub faster than it can drain. At the same time, there is not only the possibility of flooding the floor, but also flooding the neighbors. A piping or drain-overflow system allows you to organize the drainage of water from the bathtub into the sewer channel.

Standard drain design and semi-automatic

The design includes several tubes with hoses connected to the sewerage pipe system, as well as 2 bathtub openings:

The top drain is provided to regulate the volume of water in the bath and reduce the likelihood of overflow. Another hole is located at the bottom of the bowl; it serves as a drain. The standard drain model includes the following items:

  • siphon in the form of a pipe;
  • necks for draining and overflowing;
  • a tube for connecting the siphon to the sewage system;
  • corrugated hose for pouring water into a siphon.

The siphon, or pipe, is a barrier against the penetration of pungent odors from the bathroom sewer into the apartment. To fill the bowl with water, you will need to cover the hole at the bottom with a stopper. Proper operation of the drain system requires timely replacement of seals that have already worn out. The semi-automatic device differs from the standard drain-overflow model in its modernized design, which includes all of the listed elements, as well as additional ones:

  1. Valve plug.
  2. Cable responsible for controlling the plug.
  3. Rotary ring, valve, button, handle.
  4. A mechanism that allows the plug to be lowered and raised.

For the entire system to work, the cable must be tensioned and relaxed. This is done by turning the valve or pressing a special button. In the design of the semi-automatic device, the drain-overflow hole is located behind the control unit.

Among the advantages of this system are the design and convenient operation of the structure. The disadvantage of a semi-automatic system is not too much high level its reliability.

Automatic drain device

If your budget allows, you can buy an expensive automatic model. It will also be beneficial to purchase an inexpensive standard model. Prices for automatic structures range from $20-55. A distinctive feature of the automatic mechanism is associated with the presence of a special valve. After pressing it, the plug automatically closes the drain hole in the tank.

The provided valve retainer allows you to maintain its position. To drain the water you will need to press a button. The automatic lowering and raising of the valve occurs as a result of spring compression. The automatic drain system has the following main features:

  1. The drainage is controlled by feet.
  2. The visible part is compact in size.
  3. Availability of a large assortment of buttons.

An automatic drainage system is often used to equip baths for children. As a result, the water container does not need to be turned over manually to drain the water. The main disadvantage of an automatic bathroom drain and overflow device is the difficulty of replacing the button.

If a valve breaks down, the system is completely renewed. This is a rather serious drawback, since the price of an automatic bathroom drainage device ranges from $60-280.

Replacing the old siphon and caring for it

If a puddle of water regularly appears on the floor in the bathroom after it has not completely drained into the sewer system, this means that the siphon has begun to leak. In this situation, you cannot hesitate, that is, you will need to immediately begin replacing the old siphon with a new part.

Otherwise, the breakdown will lead to the appearance of mold due to increased humidity levels, an unpleasant odor and many other problems.

  1. Replacing the siphon and connecting the bathtub to the sewer with your own hands is done in the following sequence:
  2. The worn out drainage system is being dismantled.
  3. The presence of burrs at the location of the neck is checked.
  4. The rubber gasket is installed.
  5. The back of the drain pipe is pressed tightly against the gasket.
  6. The gasket is placed on the front side of the siphon.
  7. A screw is inserted and carefully tightened.
  8. The drain and overflow neck is reinforced with corrugation.
  9. The siphon is connected to corrugated hoses.

The hose discharged into the sewer is secured to the siphon using a union nut.

  • The installed system does not require special care, so it is enough to familiarize yourself with some tips that will allow you to keep your drain in perfect order:
  • semi-automatic and automatic require periodic processing of parts, which allows you to maintain the shine of the metal;
  • regular inspections are organized in order to identify possible leaks;
  • broken sealing requires changing the seal or tightening the joints;
  • a clogged siphon is cleaned with a plunger or using a small brush attached to a wire;

Removal of blockages is carried out using alkali contained in chemicals.

The listed measures are applied when problems with blockages occur, so the system needs periodic inspection and prevention.

What to pay attention to

From the very beginning you need to figure out how to remove the old siphon. To do this, you need to have a set of keys for the clamping nuts. They are easily unscrewed using a tool, and the entire system is disassembled into a certain number of component parts.

A mandatory element is draining the water, which acts as a water seal by unscrewing the plug. In some cases, the nuts “grow” to the thread and are almost impossible to unscrew by hand. This is where the grinder comes to the rescue. Before you remove the old siphon yourself, you need to familiarize yourself with the drainage diagram in the bathroom. To unscrew the clamping nuts, you will need to use a set of wrenches, which will make it easy to disassemble the old system into a certain amount components

To ensure that the parts are securely fastened and there are no leaks, you will need silicone sealant to coat the joints. It is necessary to use it before starting assembly, since it can dry quickly. Replacing the drain can be done in a lying or sitting position.

When replacing the siphon, you should remember the rule that the tightness of the tank will depend on the quality of work. Only competently done repairs will solve the drainage problem. Expert advice will help you figure out how to properly replace the siphon yourself.

Proper installation of a drain in a bathroom requires compliance with the following recommendations:

  1. When carrying out work, the sequence must be observed.
  2. To process various connections, sealants will be required.
  3. Care should be taken when tightening parts.
  4. Tightening the threaded elements by hand ends by tightening them 1/4 of a full turn.

Connecting the bathroom to the sewer requires even tightening of the nut, so its stability should be checked every time. You should begin installing a siphon in the bathroom with your own hands only after the bowl has been securely fastened, which, if necessary, will need to be leveled and secured. There should be a gap of 15 cm or more between the container and the floor.

Do-it-yourself bathroom drain installation


How to install a bathtub drain with your own hands - detailed instructions. Standard design of flush, semi-automatic and automatic device, replacement and care.

How to install roof drains

  • 1 What elements does the drainage system include?
  • 2 Types of gutters and material used
  • 3 Installation of roof drain
  • 4 Photos
  • 5 Videos

Rain is not always good. For example, during precipitation, water flowing from the roofs of buildings can greatly harm them. Falling streams and even drops eventually knock out potholes in the blind area. Water that soaks into the ground near the house can flood the foundation or basement. To avoid all these troubles, moisture must be removed using roof drains. They can be done in different variations, but serve one purpose - to protect the structure from destruction. In this article we will talk about how to install roof drains yourself.

What elements does the drainage system include?

Gutter elements

Before installing a roof drain, it is worth finding out what elements it consists of. The drainage system includes:

  • Gutters. This, one might say, is the main element of the entire system. Water enters the gutter directly from the roof, then it flows until it drains. The drain itself is made in the form of a funnel, which is also part of the system. Gutters can be made from various materials and have different shapes.
  • Gutter connectors. The length of the roof may vary. The gutters themselves, if they are factory-made, have a certain length. As a rule, you can find products up to 2.5 meters. To create the system, special devices are used - connectors. At corners, other designs are used - corner gutters.
  • Brackets and other fastening devices. Serve for fastening gutters and pipes.
  • Drain pipe. This is where the water from the gutters goes. The pipe can be either straight or made in the form of an elbow.

Types of gutters

In addition to these basic elements, others can be used. For example, mesh for gutters. It prevents large debris from entering the drain and preventing blockages from forming.

In regions with cold winters, it is worth considering anti-icing systems. These may include heating cables, temperature sensors and other devices.

Types of gutters and material used

Plastic

You can find gutters and pipes of various diameters on sale. So, the first ones are produced in the range from 90 to 150 mm. Pipes can be purchased with diameters from 75 to 120 mm. The choice of sizes will depend on the size of the roof. If the slope area is less than 70 m2, then you can purchase gutters and pipes of the smallest diameter.

In addition to the sizes and shapes themselves (square, round and others), drainage elements differ in the material used. These are mostly metal and plastic.

PVC drainage elements have recently become the most common. Thanks to a special coating (acrylic or titanium dioxide), such products are not afraid of temperature changes, moisture and sunlight. The service life of gutters and pipes made of plastic is about 50 years. Another plus is the low cost.

Metal

There are several types of metal gutters and pipes for drains. Let's list the main ones. Namely:

  • Cink Steel. This material was often used in the past. But recently, galvanized steel has begun to be replaced by its pural-coated counterpart. This is due to the long service life of the latter. Galvanized iron itself quickly deteriorates under the influence of acid rain. But such material still remains in demand due to its low cost.
  • Aluminum. Gutters and pipes made of this metal are lightweight and quite durable. Such products last much longer than galvanized steel, but are also more expensive.
  • Copper. Such products are considered the most durable. In addition, they give the roof a sophisticated look. But copper is a very expensive metal, so such gutters are not available to everyone. When installing copper gutters and pipes, it is important to consider one feature. If the roof is made of any metal or there are other metal elements, then such products cannot be installed. The fact is that water, flowing down another metal and falling on copper, will lead to corrosion of the latter.
  • Titanium-zinc. This is the most expensive option for water supply system elements. Such gutters can last a century and a half or more.

Roof drain installation

Location options

All work can be done in any season, but it is best to do it during the warm period. In the summer, everything can be done much faster and better.

  • Before draining the roof, it is worth carrying out calculations necessary materials. Decide where the drainage pipes will be located, how many gutters, brackets, connectors and other elements are needed. It is best to make a preliminary plan and drawing.
  • Then start attaching the brackets. It is important to calculate the distance correctly. The fact is that gutters should not be located close to the wall. If the distance between them is less than 6–8 cm, then the wall may not even get wet from water, but from condensation.
  • Also, when installing brackets, it is necessary to maintain the inclination of the gutters. It should go to the drain pipe and be 5-20 mm per meter. Therefore, the brackets are not mounted in a straight line, but offset.
  • Before fastening, it is worth making markings. To do this, you can do some calculations. For example, if the length of the slope is 8 m, and the slope is 10 mm per meter, then the offset between the first and last bracket should be 80 mm.
  • If the length of the roof is significant, then it is necessary to make two drain pipes, they will be located at the edges. In this case, the slope will start in the middle and go in different directions.
  • The first and last brackets are attached first. Then a thread is stretched between them, and the remaining brackets are mounted using self-tapping screws. Between the brackets it is necessary to maintain a step of 40-70 cm, depending on the weight of the gutters. Do not forget that the gutters will be attached to each other, which means there should not be a bracket in this place.
  • Then the gutters are installed. The method of their installation depends on the model. Plugs are installed along the edges. The last step will be installing the pipes. Its neck should be located directly under the gutter drain. The pipes are attached to the wall using special holders or clamps.
  • A drain elbow is installed at the end of the pipes. It will drain water from the roof away from the walls and foundation. If the site has drainage system, then the elbow should be directed towards the water inlet.

Bracket installation

Trying on gutters

Fit

Gutter installation

Gutter fastening

Funnel installation

Element fastening

Drainpipe assembly

Fasteners

Detailed video on gutter installation with useful recommendations:

How to install roof drains - installation of drains


In this article you will find information on installing roof drains. Learn how to properly install a gutter system.

Sink drain: assembly and installation of drain with overflow

Sink drains, like any other plumbing equipment, are vulnerable to breakdowns. Its installation is a simple procedure, for which there is no point in inviting a professional plumber. Let’s take a closer look at how a sink drain works and what nuances to consider when installing the device.

Purpose and design features

A sink drain in a bathroom or kitchen with an overflow is a curved structure, the key purpose of which is to redirect excess water into the drain, thereby preventing the sink bowl from overflowing.

The design of the drainage system is almost identical for both the sink and the bathtub.

Structurally, the overflow drain for a sink or sink consists of the following elements:

  • siphon with water seal - is a “U”-shaped element that performs a dual task: it prevents the flow of foul odor from the sewer and protects the drain pipe located below from clogging.
  • drain pipe - made of corrugated or rigid plastic pipe and is designed to redirect wastewater into the sewerage system.

The main secret of the functionality of the siphon is in its design. Due to the bending, the water does not completely leave the pipe. The formed water seal acts as a barrier to the penetration of sewer “ambre” into the drain hole.

Such designs are convenient because if they become clogged, they can be easily removed and cleaned mechanically or chemically.

Do you want to install a more durable device that is less prone to clogging? In this case, it is better to purchase a design in the form of an overflow drain for the sink. It differs from traditional models in that it is equipped with an additional tube.

This device connects a hole made in the upper side of the side of the bowl with the elements of the drainage system located in front of the siphon. Thanks to this, the overflow drains liquid from the sink, thereby preventing the bowl from overflowing.

From the outside, the drain hole is covered by a grill. It performs a protective function, trapping small debris and hair, thereby protecting the system from clogging.

Main types of drain devices

There are several types of drain systems. One of the most common options is a design in which the drain is secured with a large locking nut. This method of fastening can be found even in the bathrooms of houses built more than two decades ago.

Classification by device principle

Drain siphon systems used when connecting sinks come in three types: flask-shaped, elbow and combined. They differ according to the type of construction:

  1. Bottle-shaped or flask-shaped. The main structural elements are two cylinders immersed in each other. A tee is installed inside the flask of the device, distributing the liquid and forming a hydraulic barrier.
  2. Pipe. The main element of the double-turn design is the “S” or “U”-shaped bend of the pipe, which forms a hydraulic barrier.
  3. Mixed type devices. In addition to the structural elements of the bottle structure, supplemented by two partitions, they are equipped with a corrugated hose.

In bottle-type devices, the waste, entering the siphon, moves down through an internal pipe of smaller diameter. Having reached the bottom, the wastewater rises through the cavity between the inner and outer cylinders and is discharged into the sewer pipe.

Bottle siphons are advantageous in that even with rare use of the plumbing fixture, the water seal in the system does not dry out for quite a long time. This effect is achieved due to the fact that the outlet from the siphon is located approximately in the middle of the flask.

Many owners prefer bottle siphons for the reason that, if necessary, they can always connect several drains. To do this, the structure only needs to be equipped with an additional element.

Unlike analogues of bottle and pipe versions, among the combined options there are no models with bells, and therefore they cannot be connected to overflow systems and household appliances.

Division by material of manufacture

There are two types of sink drains available for sale, depending on the material of manufacture: those made of polymers and those made of metal alloys.

Polymer products are famous for their low price and ease of installation. Structures equipped with a corrugated pipe can be conveniently adjusted in length.

But service life PVC structures relatively short. And the sealing properties of the assembled structures leave much to be desired. Therefore, all connecting elements in mandatory during assembly they are equipped with rubber gaskets.

In terms of reliability and durability, metal elements of drain systems are more beneficial. Most in demand in household use models made of non-ferrous metals: brass and bronze. The harness made from such materials often has a chrome coating, due to which it acquires a rather presentable appearance.

To prevent the accumulation of dirt deposits on the inner surface of the walls during the manufacturing process, manufacturers coat metal products with a protective film of chromium.

Installation metal structures does not present any particular difficulties. A hitch can only arise at the stage if you need to shorten the outlet pipe.

Siphons for non-standard equipment

For non-standard models of double “pair” sinks, siphons equipped with two outlets are used. Such siphon devices are connected to the drains of both sinks, and a little lower along the flow of waste water they are combined into a common flask.

You need to connect the sink located on the open shelf? Then choose a model that offers hidden installation. Yes, the price will be somewhat more expensive than traditional options, but it will allow you to completely hide unesthetic elements of communications.

Drain systems of such designs will not be difficult to hide in a niche, covered with a decorative screen. But it is worth remembering that if the bend of the outlet pipe is too short, there is a high risk of an unpleasant sewer “aroma” appearing.

Technology for installing a drain with overflow

There is nothing difficult about installing an overflow drain on your own. Each device usually comes with instructions. It contains information about the order in which the structure should be assembled.

Selection of necessary materials and tools

With all the variety of models of drainage equipment, the technology for their installation is almost identical. Therefore, even if your plumbing fixture had a drain system installed, for example, a bottle type, you can easily replace it with the same combined option.

The standard siphon package includes the following elements:

  • device body;
  • outlet pipe;
  • decorative cover for drain;
  • plastic and rubber cuffs;
  • connecting nuts and screws;
  • rubber flat gaskets.

To better understand the sequence in which you need to assemble the structure, lay out all the elements of the siphon on a table or on the floor.

It will be impossible to install the system without a set of necessary tools. To work you will need:

  • flat screwdriver;
  • adjustable wrench;
  • FUM tape;
  • sealant;
  • container for collecting water;
  • cotton fabric.

If during the work you need to cut pipes and corrugation to the required size, prepare a tape measure and a hacksaw in advance. To sand the edges of the pipe, use sandpaper.

Removing the old siphon

To remove an old siphon device, you need to unscrew the screw installed in the center in the grate located in the drain hole.

Often the drain grate screw and nut “stick” to each other during operation. If you can’t unscrew them, dismantle them first bottom part siphon, leaving the upper pipe intact. By rotating this part you will help free the stuck nut and screw.

From the moment you dismantle the old siphon until you start connecting the new equipment, it is better to “clog” the sewer pipe with a rag or plug of the appropriate size.

Assembly of structural elements

When installing a pipe drain system, the structure can be assembled during the installation process, sequentially “stringing” all the elements. If you have to work with a flask-shaped system, before assembling such a drain for the sink, it is necessary to carry out a number of preparatory work.

First of all, the device is placed under the bowl and preliminary fitting is performed to ensure that the dimensions match. After this, check the reliability of the lower plug. To do this, unscrew the plug along the thread and inspect whether there are chips or other flaws in the rubber seal. This step should not be neglected, since the lower plug constantly takes on the pressure of the system.

If burrs are found on the surface, they can be cut off with a sharp knife. If not removed, they may damage the O-ring during installation.

After making sure the quality of the installed gaskets and threaded connection, begin to assemble the flask. The work is carried out in several stages:

  1. Putting a rubber gasket on the threads of the device, screw the bottom.
  2. A gasket is placed on the ends of the spout tube, and a tightening nut is placed on top.
  3. By inserting the end of the spout tube into the hole in the upper part of the siphon body, fix it in a given position by tightening the nut.
  4. Having equipped the device cover with a rubber gasket, the drain is screwed to the body with a nut.

To increase the reliability of the connection, the ring gasket inserted into the groove must be coated with a sealing compound. They should also cover the lower part of the threaded connection.

After this, the sink is installed in its seat and the installation of the drainage device begins.

Overflow assembly features

When dealing with models equipped with overflows, before assembling this element, you need to determine the height of the tube. This parameter must correspond to the depth of the bowl. If everything matches, the tube is connected to given height with the main pipe.

If the overflow tube is a prefabricated structure, then its height can be easily adjusted using the principle of telescopic extension. Corrugated pipe it simply stretches to the required length and bends in the right place.

When fixing the overflow tube to the sink, do not forget to place the included rubber gasket between the surfaces. The connection point of the outlet with the overflow pipe is secured with a clamping nut. To avoid damaging the connection, tighten the nut by hand without applying much effort.

Installation of a drain device

Before you connect assembled structure to the drainage system, the surface of the sink in the area of ​​the drain hole is thoroughly degreased and cleaned. During the installation process, the first step is to combine a protective grille equipped with 5-6 divisions with the drain hole of the bowl.

The upper end of the outlet pipe is equipped with a rubber gasket and connected to the hole in the sink. Pressing the upper side of the pipe tightly against the drain, fix it using a D6 mm screw inserted into the protective grill.

The thread into which it must be buried is pressed into the body of the pipe itself. When tightening the screw with a flathead screwdriver, it is important to achieve the tightest possible fit without twisting the flange and gasket.

The lower end of the pipe is chamfered. This is necessary in order to ensure free insertion of the end of the pipe into the siphon cavity. A plastic coupling nut is “strung” onto the outlet pipe, placing it with the thread downwards, and a conical gasket, placing the wide side towards the nut. Then they connect it to the outlet pipe, not forgetting to seal the connection.

To connect the outlet pipe to the sewer pipe, the diameter of which is traditionally 50 mm, an installation rubber collar is used. To ensure that it tightly covers the pipe, thereby preventing the spread of sewer “odors,” a product is used whose internal diameter is slightly smaller than the outer diameter of the discharge pipe.

Tip: if the diameter of the outlet does not correspond to the size sewer pipe, use the ready-made plastic adapter.

The corrugated siphon is extremely easy to connect. It is equipped with two rigid pipes at both ends. To connect it, you just need to attach it to the outlet pipe, then stretch it a little and give it the desired bend. After this, remove the second pipe to the sewer.

System health check

At the final stage, all that remains is to check the tightness of the connections and the functionality of the system. To do this, the area of ​​the floor under the siphon is covered with a piece of cotton napkin or a paper sheet. Some craftsmen place a container under the siphon for this purpose.

Open the tap and watch as the water goes into the drain hole and, passing through the siphon, falls into the sewer.

If there are no leaks at the joints and no drops appear on the napkin, the work has been done efficiently. If any are found, tighten the nuts more tightly, and the connection is additionally sealed.

Technology for installing branched siphons that allow connection to a common drain washing machines, is practically no different. The only difference is that flexible hoses coming from household appliances are additionally screwed to the outlets of the structure.

Video review on how to properly assemble a siphon:

Sink installation and drain connection:

Modern sink drain models are not that difficult to install. The main thing is to correctly select the model that is optimally suited for specific conditions, and strictly adhere to the installation instructions.

Internet encyclopedia on the arrangement of engineering support networks

Sink drain: assembly and installation of drain with overflow


Overview of drain and overflow options for sinks: bottle, pipe, combined. Guide with photos for installing a sink drain with overflow

The rich and luxurious palette of tabletops allows you to create a surprisingly naturalistic atmosphere in the room. A modern coating with imitation of natural stone or wood allows you to transform your kitchen space, making it cozy and presentable. Our factory specializes in selling quality tabletops from artificial stone . We offer a wide variety of coatings for kitchen set V various designs

. All products have certificates and necessary documentation. The presented products comply with the provisions of GOST and sanitary and hygienic requirements.

Advantages of our countertops: Seamless design.
Due to the fact that the product can be sanded, the joints can be made completely invisible. Presentable appearance.
Imitation of natural stone and rich colors demonstrate luxury and nobility. High strength.

The products have increased strength and wear resistance and are not afraid of exposure to aggressive environments.

With our countertops made of artificial stone, you can implement various ideas in the field of kitchen interior design. We will be happy to help you choose reliable coverage for your work area!

Kitchen fittings High-quality, modern fittings provide the required functionality. Imported components for kitchen furniture

They greatly simplify any work in the kitchen. Time-tested models will ensure a long service life of furniture sets.

Our company is pleased to offer reliable accessories from the manufacturer. We have the widest variety of components for faucets, kitchen sets and other pieces of furniture. All products are fully certified and have passed quality checks. All products have warranty documentation.
What do we offer?
Railings.

Drawers with closers. Containers for cutlery.. Related elements differ in size, design, and quality of coating.

With our kitchen products, all kitchen systems will function efficiently and reliably. Every minute in such a kitchen will bring real pleasure. All products have good moisture resistance and wear resistance.

Provide maximum comfort and convenience in your kitchen with our components and accessories! Kitchen facades Stylish, beautiful facades allow you to transform the appearance of your home, making it more presentable and rich. Rich variety

color solutions

allows you to select the most suitable facing elements for arranging a kitchen set. We sell luxurious facades of the highest quality in various shapes, colors and designs. We are ready to offer standard and non-standard models depending on the characteristics of the kitchen systems. All designs are manufactured on specialized machines, which eliminates scrap and possible defects.
Why is it worth ordering from us? Rich choice.
You can purchase products from us in various color palettes. Impeccable quality.
All facades have certificates and necessary documentation. Professional installation.

We organize delivery and installation of turnkey structures.

Moderate prices.

We offer products at the factory price without extra charges.

Choose the best structural elements and components for arranging a kitchen set from the Kitchens of Milan company. We will be happy to provide the necessary advisory and technical support.

  • Stylish DIY furniture made from laminated chipboard facades in Plum Wallis color
  • Practicality. The size of the slab is selected individually for each order. Due to this, furniture can be made for a room of any size and layout. Furnishings can have any shape and size. Using furniture facades offered by our production, you can assemble furnishings immediately after delivery. These are ready to install products. They do not require additional decor. They already have a nice texture. Laminated chipboard is suitable for making furnishings for any room in the house.
  • Ecological cleanliness. Our production does not use materials and substances that may pose a health hazard.
  • Aesthetics. This material looks natural and beautiful.

The slabs are durable. But there are situations when they break. In such cases, replacing laminated chipboard facades does not cause any particular difficulties. We always have slabs of the desired color, shape and dimensions to order. Delivery is carried out in a matter of days, not only in St. Petersburg. We are ready to deliver our products to any region. Additionally, we can decorate the facade with edging (edge ​​tape) and install fittings. The edging will give the products originality. And installing the fittings will save you from additional hassle.

This section of our catalog presents laminated chipboards in the shade Plum Wallis. He represents the noble Brown color with dark veins. It can safely be called a classic tone for furniture making. Almost every home has an interior item of this color. And no wonder! After all, this tone is universal. You can assemble furnishings for any room using Plum Wallis chipboards. For the bedroom and hallway you can do beautiful cabinets. You can put a wall in the living room, bookshelf or rack. You can assemble a whole set for the kitchen. Kitchen fronts in the shade of Plum Wallis look sophisticated and elegant.

Plum Wallis - dark tone. Such colors should be used with great care, as they tend to visually reduce space. Typically, dark colors are used in large rooms and diluted with light colors. You can also add bright accents. There should not be any problems with choosing combinations, since this shade is universal. It goes well with many tones. At the same time, your imagination is not limited by anything. With brown you can decorate the interior of any style. The main thing is not to overdo it. Everything in a room doesn't have to be decorated with Wallis Plum. The floor should be lighter or darker. The same applies to walls and ceilings. If the entire room is decorated in dark colors, it will look gloomy. Add more colors and decor. Then the interior will be beautiful and positive.

Laminated chipboard is an inexpensive material. It will cost much less than buying finished furniture. You can save on repairs and collect original furnishings.