Polyurethane waterproof “Moment Crystal” is one of the many adhesives produced by Henkel. The products of this company are well known throughout the world, and production facilities are located in many countries. In Russia, Henkel Era LLC, located in the city of Tosno, produces Moment glue. Leningrad region and has been operating as part of the concern since 1991.

Specifications

The composition of Moment Crystal adhesive includes stabilizing substances, heterochain polymers of the polyurethane group, ethyl acetate and acetone. Thanks to the presence of these components, the adhesive is highly water resistant and suitable for use in environments with high humidity. The product is absolutely transparent, as a result of which the junction of the elements is almost invisible. During the drying process, the composition crystallizes, which ensures a high degree of adhesion of the parts and guarantees the durability of the connection. The glue is highly resistant to heat and frost and tolerates alkalis and dilute acids well.

Glued items can be used at temperatures from -40 to 70 degrees without the risk of seam deformation or mutual displacement of parts. Optimal temperature conditions for carrying out installation work the range is considered to be plus 18-25 degrees, but if necessary, gluing can be carried out at both lower and higher temperatures.

If work with the composition is carried out under extreme conditions, it must be taken into account that the drying of the glue depends entirely on the time of evaporation of the solvent. The slower this process takes place, the longer it will take to completely polymerize the seam.

“Moment Crystal”, like many other compounds in this category, is a flammable substance. Therefore, gluing work should be carried out away from open flame sources and in the presence of good ventilation if installation is carried out indoors. The glue density is 0.88 g/cm3, and the average consumption, provided the composition is applied to both surfaces, varies from 250 to 350 g/m2. The product can be stored at temperatures from -20 to 30 degrees and, if frozen, quickly restores its properties after thawing. The shelf life of the glue is limited to two years, provided that the storage temperature is maintained. The glue is available in 30 and 125 ml tubes, as well as 750 ml cans and ten-liter canisters.

Advantages and disadvantages

A large number of positive reviews and high consumer demand for Moment Crystal glue due to a number of its undeniable advantages:

  • comfortable price and consumer availability make the product very popular in everyday life and household;
  • increased strength and durability of the connection allow the adhesive to be used for working with parts subject to moderate mechanical and vibration loads;
  • the absolute transparency of the joint seam explains the widespread use of glue for repairing objects home interior and souvenirs;
  • the possibility of combination gluing, which allows materials to be combined in various combinations, significantly expands the scope of application of the composition and makes it even more popular;
  • the glue does not contain toluene, so the composition cannot be used for other purposes.

The disadvantages of the Moment Crystal composition include restrictions on gluing items in contact with food, and an unpleasant odor due to the presence of a solvent in the composition.

Scope of application

Moment Crystal adhesive is widely used in all areas economic activity. The product is suitable for connecting materials of different structure and density to each other in any combination. Using this universal composition, you can glue porcelain, ceramics, plexiglass, fabric, rubber, foam rubber, cork and paper in different options. Due to its high waterproof properties, the adhesive is successfully used in the repair of inflatable boats, country pools and shoes.

Despite the wide range of materials that can be perfectly bonded using “Crystal”, there are also a number of restrictions on the use of this tool. The main one is the inability to work with dishes and other items that have direct contact with food. The glue is also not suitable for gluing Teflon, polyethylene and polypropylene parts.

Instructions for use

In order for the bonding to be strong and durable, you must adhere to a number of rules that can be found in the description of the product on the packaging. The main guarantee of the strength of the connection is the careful preparation of the working base. To do this, both surfaces must be cleaned of mechanical impurities, removed from dust and be sure to degrease with gasoline or acetone. After the bases are ready, you should carefully open the tube, holding it in an upright position. This will help prevent the glue from spreading and also keep your hands and packaging clean.

Next, you need to apply the gel to both surfaces and leave for 10-15 minutes. If the material has a porous structure and quickly absorbs the composition, application should be repeated. After the specified time has passed, it is necessary to forcefully connect the parts to be glued and hold them in this position for several seconds.

At the moment of connecting the parts to each other, it is possible to adjust their location, which is very important when gluing together interior items and souvenirs. After a day, the product is completely ready for use.

Precautionary measures

When working with Moment Crystal glue, you should not forget about personal safety measures. The product belongs to the class of flammable materials, so its use near open fire is strictly prohibited. Before starting work, you must open the windows or turn on the ventilation. When working with glue, it is important to prevent it from coming into contact with the skin of your hands and the mucous membrane of your eyes. In case of accidental contact, the skin should be rinsed with plenty of warm water. The packaging of Moment should be stored in places inaccessible to children and animals. Tools should be cleaned of glue with gasoline immediately after finishing work. If the product gets on the fabric, it is recommended to dry clean the product.

Due to its high quality, ease of use and low cost, Moment Crystal has virtually no equal in its category of adhesive compositions. Being an indispensable assistant in the household and everyday life, it allows you to quickly and efficiently repair any product and extend the life of your favorite things.

To learn how to use glue correctly, see the following video.

Moment Crystal glue is a special moisture-resistant adhesive composition made on the basis of polyurethane. The products have a wide range of applications, high performance characteristics, and are distinguished by an affordable price due to Russian production.

Basic performance properties and performance characteristics

This Moment adhesive is transparent and environmentally friendly, so it can be used in domestic and residential areas for discreet gluing of materials and products. The docking points will be invisible.

Important! When using Moment glue, you must be careful, because... it is a flammable composition.

The composition of the adhesive mixture includes:

  • Polyurethane polymer substances.
  • Acetone components.
  • Ethyl ester of acetic acid.
  • Stabilizers.

Products connected using Moment Crystal glue can be used in temperature conditions from -35 to +75 o C. At such temperatures, the seam will not deform and lose its performance characteristics. It is recommended to carry out gluing at a temperature from +15 to +30 o C. If required, the work can be performed at any temperature.

Important! At low temperatures, the polymerization process of the applied adhesive composition can be significantly delayed.

The main operating parameters of the Moment Crystal adhesive include:

  • Consumption: from 20 to 400 g/sq.m.
  • Density of adhesive composition: 0.88 g/cc.
  • Recommended storage temperature: from -15 to +30 o C.
  • Release form: tubes of 30 and 125 ml, cans of 750 ml, canisters of 10 liters.

Advantages of Moment Crystal glue

Glue "Moment Crystal" is in demand at Russian market, which is largely due to a whole list of its positive consumer characteristics:

  • Low price, availability (sold in any specialized stores).
  • High level of strength of the resulting seam, its durability.
  • Possibility of use for gluing parts and products during operation subject to vibrations and moderate mechanical impacts.
  • The resulting adhesive seam is transparent, so the composition is suitable for joining interior items, souvenirs, decorative elements and household items.
  • Connecting dissimilar materials if necessary (wood and plastic, metal and glass, etc.).
  • When hardening, the adhesive mixture crystallizes, due to which the surfaces are ensured highest level adhesion.
  • The frozen composition has an increased level of resistance to various acids and alkalis.
  • Residues of Moment Crystal adhesive are removed mechanically– solvents are not required for this (the frozen excess is simply rolled off with your fingers and removed).

Area of ​​use

Polyurethane adhesive “Moment Crystal”, as stated in the instructions, is universal in use, therefore suitable for use in various household, household, repair and restoration work. The adhesive composition also allows for gluing different types materials in various combinations.

Most often the mixture is used for gluing materials:

  • Ceramic.
  • Paper ones.
  • Cardboard ones.
  • Rubber.
  • Foam rubber.
  • Cork.
  • Wooden.
  • Fabric.
  • Plastic and many others.

Important! Moment Crystal adhesive is moisture resistant, so it can be used for gluing objects and products that come into contact with water and other non-aggressive liquids.

The adhesive composition is suitable for use at home, as well as in small industries. It is not recommended to use this product for joining products made of polyethylene, teflon, polypropylene. If gluing is performed plastic materials, then it is recommended to first drop a drop of Moment Crystal glue onto the surface to see how the adhesive composition will react with this plastic material.

Related article: Classifier OKPD 2 glue - what is it, types of glue classifiers

Instructions for use

In order for the adhesive joint to be of the highest quality, it is necessary to first prepare the surfaces to be joined:

  1. Clean them, remove oil and grease stains, remnants of old adhesive mixtures, etc.

2. Moment Crystal glue must be applied to both surfaces to be glued, after which they must be pressed and held for 10-20 minutes.

If the materials being joined are porous, the adhesive composition can be reapplied if required. After approximately 20-24 hours, the connection will gain maximum strength. It is possible to make adjustments to the position of the objects being glued only at the moment of connection. After 3-5 minutes after joining, nothing can be done (you will have to peel off the products, clean the surface again and re-glue).

It is not recommended to carry out gluing work in very damp areas unless necessary. You should also try to ensure a high temperature environment(about 15-25 degrees) so that the adhesive mixture can harden quickly.

Precautionary measures

As already mentioned, Moment Crystal glue is a flammable substance, so you should not open the package and apply the adhesive mixture to hot and very hot objects and products. It is not allowed to carry out work near open fire.

  • Gluing work should be carried out in a well-ventilated area. It is necessary to open all the windows in the room, turn on forced ventilation, if available.
  • Do not allow the adhesive composition to come into contact with the skin or mucous membranes. In case of accidental contact of the mixture with the skin, the area should be washed with plenty of warm water.

  • All materials and tools that were used to apply Moment Crystal glue must be cleaned with gasoline or another solvent immediately upon completion of all work.

Important! During the gluing process, it is necessary to use personal protective equipment: gloves, goggles, a respirator (especially if long-term gluing work is expected.

If Moment Crystal glue gets on the mucous membrane or in the eyes, you must promptly rinse the area with warm water and contact a medical facility as soon as possible.

Related article: Glue 88 Lux - varieties, scope of application, technical characteristics

Storage

It is recommended to store Moment Crystal glue in completely closed original packaging. Storage should be carried out in a dark place at room temperature. Storage in conditions of negative temperatures is allowed (the adhesive composition will be suitable for use after thawing).

It is necessary to prevent the tube of Moment Crystal glue from falling into the hands of children. It is strictly forbidden to set the packaging on fire or throw it into an open fire. Shelf life is about 2 years. After this period, the adhesive composition will be suitable for use, but will lose some performance characteristics.

Glue Moment Crystal (2 videos)


Using Moment Crystal glue (15 photos)











Goods ordered in the OBI online store are delivered throughout Moscow and the Moscow region within 50 km from the Moscow Ring Road. Delivery costs are automatically calculated when placing an online order, based on the weight of the product and delivery area.

Minimum order amount for free delivery:

We will deliver your order free of charge if the delivery address is located in the first delivery zone for online orders, and also:

  • > 5,000.00 RUR- for orders weighing up to 5.0 kg
  • > 10,000.00 RUR- for orders weighing up to 30.0 kg

The courier service delivers small-sized orders (weighing up to 30 kg) to the buyer’s door, large-sized ones - to the entrance (wicket, gate) of the house. Delivery includes free unloading of goods from the vehicle and their transfer within 10 m.

Delivery date and time

Next day delivery is available when ordering before 6:00 pm. You will be offered a choice of one of two 7-hour delivery intervals:

  • - from 10:00 to 16:00
  • - from 15:00 to 22:00

If you want to reduce the waiting period, you can choose one of the 3-hour delivery intervals for an additional fee:

  • - from 10:00 to 13:00 +350.00 ₽.
  • - from 13:00 to 16:00 +300.00 ₽.
  • - from 16:00 to 19:00 +300.00 ₽.
  • - from 19:00 to 22:00 +350.00 ₽.

Rescheduling the date and changing the delivery time interval is possible no later than 24 hours before the previously agreed date and time.

You can find out more about the working conditions of the courier service in the section

Universal glue Moment Crystal has become simply indispensable in everyday life. It allows for quick gluing different materials– from ceramics to rubber. Its main advantage is the almost complete invisibility of traces from the connection of parts. The adhesive composition is high quality and has excellent characteristics.

Moment is a universal adhesive, transparent, its composition is waterproof. With it you can reliably and permanently glue different materials.

The crystal qualitatively connects wood, metal, porcelain, rubber and other surfaces. The joint area is provided with high strength. The glue can also be used for fabrics, because it does not leave marks or stains and does not deform the processed material.

The glue is available in a metal tube with a volume of 30 ml or 125 ml.

The crystal does not change its parameters even under the influence of high humidity or temperature changes. Thanks to this he uses in great demand, It has a large number of positive reviews from experienced builders and from those who prefer to do all the work themselves.

The glue is complex chemical composition, to create it they use Newest technologies. The main components are:

  • polymers from the group of polyurethanes;
  • ethyl acetate;
  • acetone;
  • stabilizers.

Stabilizers increase resistance to moisture. As it hardens, it crystallizes, due to which the joints have high strength.

Varieties

Ruler contact adhesives The moment includes the following types:

  • Moment 1 is universal – suitable for most materials;
  • Moment Crystal is a colorless polyurethane composition for various materials;
  • Moment Marathon - used in most cases in the footwear industry;
  • Moment Gel – adhesive with a gel texture;
  • Rubber moment – ​​suitable for connecting any hard or foam rubber;
  • Torque 88 – characterized by increased strength.

Each type is sold in tubes of 30 ml and 125 ml. These compounds help to truly reliable connection various materials.

Specifications

The moment is characterized by the following properties:

  • transparency in liquid form and after hardening;
  • resistance to environmental factors due to the polyurethane base;
  • during crystallization of the seam, the degree of adhesion of the two surfaces improves;
  • water resistance – can be used for shoes and rubber boats;
  • resistance to dilute acids and alkalis;
  • frost resistance - can withstand temperatures down to minus 40 degrees;
  • good tolerance to high temperatures up to 70 degrees;
  • temperature range for operation is 18 – 25 degrees;
  • Warm, dry air accelerates crystallization, and in the cold, solvents evaporate slowly.

There are 2 main limitations for use:

  • it is prohibited to use it for dishes;
  • The use of polypropylene, polyethylene and Teflon products for repair is prohibited.

Instructions for use

The instructions for working with Moment are as follows:

  • To connect the surfaces, they are first thoroughly dried and cleaned using fine-grained sandpaper.
  • After cleaning, the surface is degreased with gasoline or acetone, then applied in an even layer.
  • Both surfaces are coated with the composition. Leave them outdoors for 15 minutes. A film should appear on the surface. Before connecting, you need to touch it with your fingers - if it does not stretch or stick, then you can connect. If the materials absorb well, then the composition must be applied a second time.
  • Press the parts firmly and hold for a few seconds. The effectiveness of the operation depends on the effort applied. After 7 seconds, the position cannot be corrected.
  • It is important to press from the center to the edges so that air cannot accumulate in the central part, worsening the grip.

Using an adhesive
  • You can use the repaired product after 24 hours.
  • As a result, with the help of Crystal, a high-strength connection is obtained that is resistant to wear, negative influence high temperature, solutions of acids and alkalis and moisture.

According to reviews, Crystal is reliable and durable. The quality of the resulting seam corresponds to that declared by the manufacturer.

During operation, it is important to remember that it is highly flammable. All operations with it are carried out away from sources of fire, only in a room with good ventilation.

Also, to comply with safety precautions, it is recommended to carry out work in special clothing. If the Crystal gets on the open surface of the skin, it provokes a burning sensation, irritation, and a local allergic reaction.

During work, it is necessary to remove excess and random stains. You can wipe them off in the following ways:

  • You can clean the tools with gasoline;
  • gasoline also helps remove fresh stains on clothes;
  • Dried glue can only be removed from fabrics by dry cleaning; from other materials - with gasoline.

The quality of Moment Crystal corresponds to what the manufacturer claims. Every home should have such glue to use in case of unforeseen circumstances and fix things.

In contact with