Grass trimmers are an affordable replacement for a lawn mower. They are cheaper, more convenient, more maneuverable, easier to operate and maintain. The trimmer can work on any area and treat areas inaccessible to a lawn mower. The difficulty in choosing is that the market offers many different models. They differ greatly in characteristics and cost from a little more than a thousand to tens of thousands of rubles. How to buy what you need and not overpay?


How to choose a lawn mower

A lawn mower is indispensable when caring for large summer cottages is required. Mowers perform best on flat, open terrain and large areas. We’ll look at how to choose a lawn mower with optimal characteristics and not make a mistake in our article.


Scythes come in battery, corded, and gasoline versions. The first and second differ in operating time. With a battery-powered scythe you will work for a maximum of half an hour without a break, with an electric scythe - at least the whole day, but with a small caveat: the scythe should rest for 15 to 30 minutes after each hour of work. Gasoline scythes are fundamentally different from battery and electric ones - they have their own characteristics. Let's talk about them.


Accessories for lawn mowers: what will be useful for work

When buying a lawn mower, you have to worry about accessories and accessories. Often consumables - trimmer head, shoulder strap - are included in the kit. However, for work gasoline equipment You also need fuel and canisters for preparing the mixture and storing it. Let's look in more detail at what is required for effective operation of a brush cutter.


Top 7. Rating of the best lawn mowers according to buyers

A petrol mower is a convenient and practical tool for caring for the area. Even if you do not plan to plant a garden on your property or create an English lawn, cutting the grass is necessary not only for aesthetic reasons.

Gasoline trimmers are one of the indispensable assistants for amateur gardeners, summer residents and owners of cottages and private houses. Using this device, you can tidy up the lawn, prepare large volumes of hay, treat shrubs, and so on. One of the main advantages of such equipment compared to electrical products is absolute autonomy and independence from the presence of an electrical power source.

If necessary, such products can be used to mow grass even in hard-to-reach places - near permanent buildings, near trees, borders, garden paths and so on. Grass mowing is done using a special fishing line of a certain diameter and stiffness, but the device may also come with a special knife designed to work with branches up to 1 cm in diameter and thick grass.

Gasoline trimmers are quite compact in size. The range of similar products presented in stores today is so wide that it is very easy to get confused and purchase a model that is not quite suitable. That is why we decided to devote our today's review to such devices. Before we look at specific models, we have provided a number of basic purchasing recommendations of this equipment so that it does not disappoint the user during operation.

When using such a product, one of the key roles is played by the design and technical equipment of the equipment. You should definitely pay attention to the ergonomic component, because not all models are comfortable to hold in your hands for a long time. The net weight of the product can reach about 10 kg, so every little thing will affect the ease of use.

Almost all models are equipped with a two-stroke engine; a four-stroke engine can only be found in high-power devices. As a rule, there is no special reservoir for oil; it will have to be mixed with gasoline in a proportion strictly established by the manufacturer.

It is also necessary to pay attention to the noise level during operation, since a device that is too loud cannot be used in the morning or evening hours, so as not to disturb anyone.

The degree of vibration has a direct impact on work comfort. In the majority modern devices Special systems are provided to extinguish it. Balancing is also very important, since one side that is overweight will definitely affect the quality of work - this will be clearly noticeable when mowing the lawn.

When developing our rating, we took into account all such points, and also paid attention to the price-quality ratio of the device and user reviews. We hope that after reading the review you will be able to choose the most suitable equipment for yourself.

Top 3 models in the inexpensive price segment

3.Bort BBT-230


The model is distinguished by excellent manufacturing and assembly quality, even despite the fact that it is one of the cheapest among all the designs included in our review today. Some of the elements are metal, some are made of reliable plastic of increased rigidity. A special disk with pobedit teeth is supplied with the device. They practically do not become dull during operation, with the help of this cutting element It is very easy to process both shrubs and young trees.

The model is also equipped with a backpack suspension, thanks to which the weight of the product is evenly distributed on both shoulders. The engine is two-stroke, runs on a mixture of oil and gasoline; unfortunately, the manufacturer did not provide a measuring cup for mixing these things. The motor is of high quality. The rod has a telescopic mechanism and is made of anodized aluminum. The shaft is made of steel and rotates on bearings, which can remain in working condition much longer than bushings. When cutting grass, you can use a fishing line with a maximum thickness of 3 mm. You can assemble the product and put it into working condition yourself without outside help.

Advantages:

  • Attractive appearance;
  • Reasonable cost;
  • Good build quality;
  • Works great on thick grass and branches.

Flaws:

  • The quality of the translation of the instructions leaves much to be desired; there is no visual aid for assembly.

2. Huter GGT-1000T


This design has a straight rod, the engine is located at the top. The model is ideal for clearing tall grass and trimming lawns in areas where a traditional wheeled lawn mower cannot reach. This trimmer is equipped with a two-stroke engine, in addition to it there is an electronic ignition system. During operation, air cooling of the motor starts. The engine capacity is only 32.6 cc. cm, which allows it to develop power up to 1 kW, runs on a mixture of oil and gasoline, and the gas tank capacity is only 0.7 liters. This will be quite enough for one and a half to two hours of continuous work.

At idle, the number of revolutions of the cutting surface is up to 9,500 thousand per minute; the kit comes with a special knife for bushes. The design uses one of the latest vibration damping systems - your hands practically do not get tired during work. The trimmer works best with AI-92 gasoline. The ignition element is located on the handle of the device. The handle itself is rubberized, shaped like a bicycle handlebar. It is located in the central part of the rod, thanks to this it is possible to achieve ideal balance of the device. The maximum cutting width is 26 cm. At the bottom, the blade is covered with a protective guard that prevents grass from being scattered. The manufacturer advises immediately after completing work to clean all open components of the tool in order to extend the life of the model.

Advantages:

  • Shows itself well over large areas;
  • Cuts bushes and small growth fairly smoothly;
  • High build quality.

Flaws:

  • The fishing line reel is rather weak - it is advisable to replace it immediately after purchase;
  • The instructions are not very informative; there are illustrations, but their quality leaves much to be desired.

1. PATRIOT PT 555


This model rightfully took first place in the rating section of the best gasoline trimmers in the inexpensive price segment. Thanks to the increased volume of the gas tank, the device is able to operate autonomously for a long time. There is a special lock on the handle that prevents spontaneous or accidental starting of this equipment. This lawn mower can easily cut through both lawn grass and thick weeds. The model has a comfortable and durable shoulder strap. A special vibration damping system almost completely absorbs vibrations during operation. Almost all users in their reviews note that this device is quite easy to control, largely due to the fact that all controls are located on the control handle.

TO professional models It is impossible to classify such equipment, but for individual use it is simply perfect. Before starting work, it is worth checking how reliable all existing bolted connections are. The fact is that despite the vibration damping system, they are capable of becoming loose over time. If you overlook this moment, then you can not only seriously damage the device and disable it, but also get serious injuries. When preparing a mixture of gasoline and oil, it is advisable to use a special motor oil that was developed by the manufacturer itself.

Advantages:

  • High power – cuts bushes like grass;
  • All metal elements are made not from tin, but from high-strength steel.

Flaws:

  • A fairly heavy design, which is also characterized by increased fuel consumption.

The best lawn mowers in terms of price and quality ratio

4. Stihl FS 55


This model is considered the most durable among all the devices presented in our review of the best lawn mowers. The design is characterized by a huge number of advantages, high performance characteristics and the presence of a number of additional features. She will be an indispensable assistant on the site, regardless of weather conditions. The petrol mower has an ideal balance; the product is based on a reliable internal combustion engine, its volume is 27.3 cubic meters. cm. Its cylinder is coated with chrome-plating compounds, due to which it excellently resists wear and has a fairly long service life. The carburetor supplies the fuel mixture without interruption and is equipped with a good filter that prevents blockages. The primary supply of fuel occurs through a reliable hand pump of simple design.

The ignition system is completely electronic and has perfect tightness. Due to it, the start-up is instantaneous, the trimmer operates stably even in rather difficult conditions. This system is able to support high voltage, thanks to which the spark occurs quickly and burns for a long time - this allows you to significantly reduce the volume of exhaust gases. The shock-absorbing system is reliable, vibration is almost not felt. The weight of the model is not very heavy - with an empty gas tank it is only 5 kg: this device can easily be carried on you all day.

Advantages:

  • Excellent reliability;
  • High level of productivity;
  • She is able to work without interruption for a long time;
  • Breaking in is easy - during the first three fills of fuel, the device should not be subjected to maximum load.

Flaws:

  • The air filter gets clogged quite quickly, which affects performance; it must be changed regularly or at least cleaned.

3. Makita EBH253U


This equipment belongs to the latest generation of country equipment. This is the first model in our review of the best gasoline trimmers equipped with a four-stroke engine. It is characterized by high environmental friendliness, reduced noise and a number of the latest type of control systems. The handle is a bicycle type, the design includes a special unloading vest, which allows you to operate the device for more than one hour, and besides, the lawn mower itself does not weigh too much. With its help you can process fairly large areas. For working with lawn grass, there is a connector for installing a special reel of nylon tape. To remove tall and thick weeds or trim small trees or shrubs, you can use the special knife that comes with the kit. It is equipped with 4 blades, the power of which is quite enough to cut branches with a diameter of up to one and a half centimeters.

The rod is made of lightweight aluminum alloy and is straight, which greatly increases the maneuverability of this equipment. In particular, the trimmer is very convenient to work even on rough terrain, including in hollows or ravines. The power is quite sufficient for professional use– such a lawn mower can be used for processing roadsides, railway tracks, park areas, and so on. It is worth noting that the handle has an adjustment function, so it can be adjusted to suit you. It is possible to mow the grass at a certain angle. The handles are rubberized, do not slip at all in the palms, and help further dampen vibration.

Advantages:

  • Excellent workmanship and assembly quality;
  • It doesn't make too much noise;
  • Along with the gas tank, there is a reservoir for motor oil, so you don’t have to prepare a special mixture.

Flaws:

  • There are certain requirements for storage conditions;
  • A fishing line reel is not included;
  • More expensive than other models.

2. Husqvarna 128R


This Swedish-made lawn mower is one of the leaders among the best gasoline trimmers in terms of the price-quality ratio of the device. The model is lightweight - it weighs only 5 kg, making it perfect for working in small country or garden plots. The brush cutter is equipped with a special belt that ideally distributes the load across the entire spine - it is very convenient to use for a long time. The speed control knob is located on the handle of the device and has an ergonomic shape, making the operation of the lawn mower even more convenient. A quick and easy start is made largely thanks to the latest patented Air Purge system, as well as the presence of a special pump that will pump fuel into the engine.

There is no separate reservoir for engine oil, so before refueling you will need to prepare a special fuel mixture. During operation, a special oil produced by the manufacturer is used. It was created specifically for garden tools, prevents the formation of carbon deposits on the pistons, which prolongs the service life of the model. This design enjoys quite a lot of trust among users: it has excellent technical characteristics and a long service life.

Advantages:

  • Low fuel consumption;
  • The vibration is not too strong;
  • The mass is small;
  • It is designed quite simply; maintenance and minor repairs can be done on your own.

Flaws:

  • It is not very convenient to adjust the length of the belt during operation.

1. KRÜGER GTK 52-7 brush cutter


A brush cutter with a gasoline engine has an increased power of 3 kW. The tool is used to treat areas of up to 10 acres. The air cooling system prevents engine overheating during prolonged operation. Idle mode petrol trimmer produces up to 2800 rpm, and during operation - up to 9000. Short grass is mowed using a fishing line. If you need to cut bushes or young trees, instead of a fishing line, install a saw blade, which comes complete with a gas trimmer.

The Kruger brush cutter has a well-thought-out design, so it is convenient to work with it in any conditions. The soft start system allows you to start the engine quickly and without problems. Expanded equipment increases the functionality of the tool. The Kruger petrol trimmer comes with five blades made of durable metal and two spools with fishing line. The petrol mower demonstrates the best value for money and high German quality.

Advantages:

  • Low fuel consumption;
  • Minimal vibration;
  • Availability of Smart Start system.

Flaws:

  • It is noisy during operation due to the high engine power.

Buy the best you can use the KRÜGER GTK 52-7 brush cutter here!

The best professional gasoline trimmers

3. Makita EBH341U


This model is distinguished by fairly high power levels, but at the same time the volume of exhaust gases during operation of this device is minimal. The product is suitable for almost any type of work related to grass and not too thick branches of bushes and trees. This gasoline trimmer is equipped with a four-stroke engine, the design of which includes a special valve of a certain shape, due to which it is possible to significantly reduce the pressure and ensure quick and easy starting of the device. The handle is rubberized, fits comfortably in the palm of your hand and does not slip out of it. It is made in the shape of the letter U, the grip is very reliable.

The maximum power of the device is 1.45 horsepower or 1.07 kW. The volume of the internal combustion engine is 33.5 cubic meters. cm. When working with this trimmer, you can use a fishing line with a maximum diameter of 2.4 mm. The drive shaft is characterized by increased rigidity. The weight of the equipment is 7.1 kg when empty, with a filled gas tank it will be slightly more. It consumes about 0.5 liters of fuel per hour at the highest load.

Advantages:

  • Almost no noise during use;
  • The design is very reliable and can last for more than one season;
  • No regular oil changes required.

Flaws:

  • At idle it can sometimes stall.

2.ECHO SRM-350ES


One of the best professional designs, equipped with a two-stroke gasoline engine of increased power - 1.9 hp. In addition, there are easy start systems that will not cause kickback. Despite the fact that the model belongs to the professional class, it can also be used in home areas, in the garden and in the vegetable garden. Due to high level power trimmer copes excellently with dense thickets. The mowing tool used here is a reliable reel with fishing line designed for soft lawn grass, or a knife for working with thick and dense vegetation; if desired, it can even be used to process trees and shrubs.

The gas tank capacity is 0.84 liters, fuel consumption is very economical, so there is no need to refuel this device regularly. The weight of the product is 6.78 kg. The set includes a three-point adjustable belt that allows you to reduce the load on your shoulders, spine and lower back while working. The handle is adjustable, you can customize it to suit you.

Advantages:

  • Access to the air filter is quite easy;
  • Some of the highest maneuverability rates;
  • Excellent easy starting system;
  • The trimmer is ideal for processing difficult areas;
  • The engine has low fuel consumption.

Flaws:

  • Quite a noisy model.

1. Stihl FS 130


This is a rather complex, but very powerful model, the output of which can be about 1.9 hp. Thanks to the increased technical characteristics of this model, it is possible to cultivate about 20 acres of land at a time. Due to the high number of revolutions and significant power, it is possible to easily cope not only with small grass vegetation, but also with dense thickets and shrubs. The engine is started manually. The gas tank volume is 0.55 liters, gasoline consumption is minimal, so it can work for quite a long time without additional fuel filling. The equipment is equipped with a vibration damping system - the operator’s arms and back will not get tired during operation. The mower is mounted on a shoulder strap. The weight of the device is about 6 kg, the load is distributed evenly. The handle is adjustable, so you can cut the grass at almost any angle.

The equipment operates on the basis of a mixture of oil and gasoline: strictly 50 parts of AI-92 gasoline are taken for 1 part of oil; only a special composition developed by the manufacturer is used as oil.

Advantages:

  • Long battery life;
  • Not a very large mass of equipment;
  • Very easy to use - the location of all handles is intuitive;
  • The high level of power of the gasoline engine allows you to cope even with very thick thickets of grass;
  • The degree of maneuverability is much greater compared to traditional wheeled lawn mowers.

Flaws:

  • Not detected.

At the end of the video

With the arrival of the spring-summer season, all owners of suburban areas are always faced with the same problem - caring for lawns and lawns and fighting fast-growing weeds and bushes making their way through. An ordinary scythe is not always a good helper: firstly, to use it, you need certain experience, and secondly, in the cramped conditions of the site it is almost impossible to operate such a tool between trees, bushes, benches, posts, borders, etc.

In order not to resort to manual, very labor-intensive operations, it makes sense to purchase a trimmer, or, in other words, a motorized scythe, with an electric or gasoline drive. In the case where the lawn or lawn is located close to the house, is small in size, and is not expected to be subject to heavy work, it may be sufficient electrical appliance. But gas mowers and trimmers have much greater capabilities; how to choose which ones will be discussed in this publication.

Advantages of gasoline scythes, their basic structure

First of all, let's remove a small contradiction. Some publications on the Internet provide a very controversial classification, according to which only power tools are classified as trimmers, completely separating this category from lawn mowers with a gasoline engine. In others, trimmers include all types of manual mechanized scythes, both electric and with internal combustion engines (pos. A), thereby highlighting their difference from wheeled lawn mowers (pos. B) and, even more so, self-propelled raiders (pos. B).


The main types of mechanized mowers: A - manual (scythes); B – wheeled; B – self-propelled (raiders).

How impeccably correct it really is is difficult to say. However, the second type of classification still seems more clear and reasonable. Without claiming absolute truth, we will still adhere to the definition that a trimmer is a hand-held tool for cutting grass with an electric or gasoline power drive.

Despite the very wide variety of models of gasoline trimmers, most of them are made according to a single design. An internal combustion engine is used as a power drive, from which the torque is transmitted to the working cutting head. The illustration shows the main visible elements and components of a standard lawn mower-trimmer:


1 – Gas engine, located at the top.

2 – fuel tank.

3 – manual starter for starting the engine.

4 – rod connecting the engine to the working part of the trimmer. Inside the rod there is always a flexible or rigid shaft that transmits rotation. The rod can be solid or collapsible, consisting of two or more sections.

5 – handle, which can be various types, which, by the way, predetermines the placement of the main controls (position 6).

7 – cable connecting the control device to the engine.

8 – angular gearbox that transmits shaft rotation to the working spindle.

9 – cutting tool– a special knife or reel (spool) with a cutting cord (line).

10 – protective shield that protects the operator’s legs from injury during operation

Lawn mower controls may vary slightly in their layout, but usually include several keys and switches that are identical in functionality:

1 – button (toggle switch) of the ignition circuit. Allows you to instantly turn off the engine if necessary.

2 – main key that controls the carburetor throttle valve (gas key).

3 – safety key that prevents accidental pressing of the gas. Until it is recessed, the main key cannot be used.

4 – control key stopper when pressed. Facilitates management of large volumes of work.


Typically, another control element is located on the engine itself - this is the choke position switch. Used to facilitate starting and quickly warm up the engine in conditions of low air temperature.

Some more details about the main elements and components of the mower will be discussed below, when considering the parameters for choosing a tool. In the meantime, a few words about the advantages of gasoline trimmers:

  • Such a tool is completely independent of an energy source - to work on the ground, it is enough to have the necessary supply of fuel with you. In addition, even when working directly at home, there is a clear advantage - there is no power cable constantly getting in the way under your feet.
  • Unlike an electric trimmer, a gasoline trimmer can be used after rain or early in the morning, before the heavy dew has disappeared. The upper position of the engine completely eliminates any dependence of the safety of using the tool on the level of moisture in the mowed grass.

  • Gasoline trimmers are always more powerful, have a longer service life, and are capable of long work without pause, cope with tough grasses and shrubs. The probability of the drive overheating is many times less than that of an electric trimmer.

Gasoline trimmers also have certain disadvantages:

  • Their device is more complex than their electrical counterparts. Their operation and especially regular maintenance require certain knowledge and skills.
  • Gasoline mowers are always significantly more massive, which means working with them will require more significant physical effort.
  • Equipment of this class is very picky about the purity of the fuel and the correct composition of the fuel mixture. Low-quality fuel may cause interruptions or failures in the operation of the tool.
  • An internal combustion engine always produces exhaust and a significant noise level.

However, if you plan to process large areas, or work in areas where there is no way to connect to power, you won’t find anything better than a gasoline trimmer. The advantages of such a tool significantly outweigh its disadvantages.

Prices for petrol trimmers CALIBR

Gasoline trimmers Caliber

Find out how by reading the features of the tool in a publication on our portal.

Gasoline trimmer selection options

Why do you need a gas mower?

Before you start choosing the optimal model of a gasoline trimmer, you should very clearly outline the range of tasks that will be assigned to this tool. Based on this, most of the evaluative selection criteria will be predetermined.

All gasoline scythes are conventionally divided into three main groups.

  • Professional or gardening. This is, as a rule, a tool for workers of public utilities, landscaping and beautification enterprises, and forestry farms. Such brush cutters have an increased resource and the ability to work for many hours on a daily basis. They are equipped with powerful engines and reinforced transmission mechanisms. As a rule, they are equipped with knives that can cope with bushes, and sometimes even with young trees.

Naturally, such instruments are quite massive and have spacious fuel tanks. To make working with them easier, special belt systems are provided to take the maximum load off the operator’s hands. In addition, special backpack models have been developed, that is, the power drive, worn by the worker in the form of a backpack, is connected to the rod by a flexible transmission shaft in a casing. This arrangement causes less operator fatigue during long-term operation.


Using a trimmer of this class for personal use seems excessive; the purchase is unlikely to be profitable.

  • Semi-professional-class brush cutters are often called “farm”, which quite accurately defines their purpose. These are reliable assistants in household, designed for regular, fairly frequent use with considerable loads.

Their drive power, torque transmission features, and equipment with cutting attachments allow them to cope with vegetation almost no worse than professional models. Farm brush cutters are used both for caring for the garden and for performing specialized agricultural work.


They are distinguished by their low weight, high maneuverability, and ease of use. Their motor power seems to be low (usually around 1000 W), but it is quite enough for mowing grass and small shrubs. The main cutting tool is cord (line), although some models may also include knives.

Their permissible duration of non-stop operation is short, and is usually limited by the capacity of a small fuel tank.

Gasoline engine type

Gasoline scythes can be equipped with two types of engines – two-stroke and four-stroke. It should be immediately noted that this does not directly affect the power of the tool - there are also professional brush cutters with a two-stroke drive, and small “amateur” class trimmers equipped with a four-stroke internal combustion engine.

  • Two-stroke engines attract with their unpretentiousness in operation. They start well even in cold weather, are simple to set up, and are easier to repair. Their prices are relatively low, which determines their very wide demand among consumers.

They have many disadvantages.

— First of all, to refuel lawn mowers with a gasoline engine, you will have to independently prepare a fuel mixture from A-92 gasoline and special motor oil. The operation is, in principle, simple, but requires care and precise adherence to proportions. The prepared composition cannot be stored for a long time - its properties are lost over time. That is, each time you work with the trimmer you will have to prepare the fuel mixture.


— The second drawback is the large volume of exhaust, which can be important if work is carried out near residential buildings.

— And thirdly, such an instrument is characterized by increased noise, which will have to be taken into account when using it, for example, in the early morning hours, in order to avoid misunderstandings with neighbors.

  • Four-stroke engines do not have these three mentioned disadvantages. They have separate containers for refilling with gasoline and motor oil. During operation, they produce much less noise, and the total volume of exhaust gases is significantly reduced.

Such engines usually have a higher service life, are capable of long-term operation without pauses, and use fuel much more economically.

Disadvantages of such internal combustion engines:

— The design is more complex both in structure and for Maintenance.

— Four-stroke engines are always heavier than their two-stroke counterparts of equal power.

— The main disadvantage, although somewhat arbitrary, is the high cost of gasoline trimmers equipped with four-stroke engines.

  • You should pay attention to the design of the fuel tank - it is very convenient if it is made of translucent plastic, as this allows you to visually monitor the amount of fuel remaining in the tank.

  • Almost all engines of brush cutters (with rare exceptions) are equipped with a manual starter - with a drum, a pull cord and a handle. Some models, in addition, have a modern easy start system - FLASH STARTER. By pulling the cable, the operator does not transmit rotation directly to the crank assembly of the engine, but cocks a special spring, which, in turn, will transmit a torque impulse for starting. Thus, the operator does not have to overcome compression jerks, starting becomes simpler and smoother, requiring significantly less physical effort.

  • To make starting easier, there should be a “primer” button on the power unit of the lawn mower. Several presses on it before starting will ensure that any remaining air leaves the gas line tube and supplies the required amount of fuel to the carburetor.

Gasoline drive power

The engine power can range from 700 ÷ 800 to 2500 watts or more. The choice directly depends on the expected load on the tool. In principle, it is the power that determines the operational classification of gasoline trimmers.

This parameter is sometimes indicated in horsepower. The relationship is simple - 1 kW = 1.36 “horses”, or, conversely, 1 horsepower = 0.74 kW.

  • For household-class models, as a rule, a power of up to 1 kW is sufficient. Petrol mowers with such a drive can easily cope with ordinary grass, sedge, and small young shrubs.
  • The power of “farm” gasoline trimmers usually ranges from 1.5 to 2 kW, which already allows more serious work to be done using knife attachments.
  • Powerful professional tools, over 2 kW, have a full range of capabilities, and the use of special circular saws allows you to mow not only dense bushes, but even cut down young trees with a trunk thickness of up to 20-30 mm in diameter.

Naturally, an increase in power is accompanied by an increase in the weight of the lawn mower and its cost. So it is necessary to have a very clear idea of ​​the intended scope of application of the tool.

Rod type and design

The rod with the transmission shaft located inside can differ in two parameters.

  • A straight bar is more typical for professional or “farm” models. The shaft transmitting rotation along its entire length is a rigid rod made of a high-strength alloy. It is supported by several roller bearings, and is capable of transmitting significant forces to the working head of the tool without the risk of damage.

The curved shaft makes the brush cutter more ergonomic - it is much more convenient to process difficult areas with such a tool, for example, near trees, flower beds, benches, etc. In addition, the operator spends much less effort to maintain the cutting attachment at a certain height. However, this is achieved by the fact that a flexible drive is installed in the rod, which is always more vulnerable to loads, and the likelihood of its failure in an emergency situation is much higher. This type of rod is more typical for lawn mowers of low and medium power, not intended for heavy loads.

  • The rod can be one-piece - from the engine clutch assembly to the gearbox of the working part. The advantages are, again, the integrity of the transmission shaft. The disadvantage is that a gasoline trimmer of this type requires a lot of space when transporting or storing.

The collapsible rod makes the tool more convenient in terms of transportation and storage. In addition, some models of lawn mowers require the use of specialized working attachments - they are adapted specifically for the connecting unit of the collapsible rod.

Prices for Husqvarna petrol trimmers

Husqvarna petrol trimmer

The disadvantage is clear - any extra drive connection is always an additional vulnerable point prone to wear. In addition, the operator is obliged to monitor the condition of this unit, prevent accidental entry of earth or sand into it, carry out maintenance, etc.

Handle type, belt system

Holding a rather bulky and heavy structure in a given position and controlling the movement of the cutting head parallel to the ground level is not so simple task. Therefore, it is extremely important to select a model for ease of use, and this directly depends on the configuration of the handles and the belts used.

It is difficult to give recommendations in this matter - each potential user, when choosing a lawn mower, must independently try the tool for himself and evaluate the degree of ease of working with it. In this case, of course, the duration of the work should also be taken into account.

  • For professional or “farm” class models, T-shaped handles reminiscent of a bicycle handlebar are more typical. The right handle usually houses the tool controls. This configuration of the handles, combined with a properly selected belt, is convenient for long-term work over a large area and allows you to make wide movements, as when working with a regular scythe.

D-shaped or J-shaped handles are usually found on lightweight brush cutters. They are more convenient to control the tool when performing more “delicate” maneuverable work. The control unit is located on the rod, shifted towards the engine.

All handles have a fastening system that allows you to move them along the rod, rotate it relative to its axis, and in the case of a T- or J-shaped configuration, also change the amount of reach to the left or right. All this makes it possible to precisely adjust the brush cutter to the individual characteristics of the operator, ensure its balance and achieve maximum ergonomics.

  • The choice of belt should also be taken seriously.

If you plan to work for a long time, especially with a fairly heavy brush cutter of a professional or semi-professional class, then it is better not to spare money on purchasing a backpack-type belt system. Such equipment will evenly distribute the load across the entire shoulder girdle and back of the worker, significantly reducing the level of fatigue. In addition, a special pad on the operator’s thigh will reduce the degree of transmitted vibration and protect against possible burns from the engine heating up during operation.


For short garden work with using the lung a gasoline trimmer is enough and a regular shoulder belt with a soft, wide pad on top. The cost of such a belt is, of course, many times less.

Working equipment of a gasoline scythe

Working cutting tools for a gasoline scythe can be included in its kit or purchased additionally.

  • Almost all models are always equipped with a reel (spool) for winding a certain amount of cutting line (cord). As a rule, such a device allows you to adjust the length of the protruding ends of the fishing line in a semi-automatic mode - there is a wide stop button on the lower plane. When it hits the ground lightly, the stopper releases the internal reel, and the line comes out under the influence of centrifugal force. There is a special knife on the protective casing that will cut the exposed ends of the cord to the required length.

  • To mow thick grass, sedge, reeds, and shrubs, metal (sometimes plastic) knives (cutters) are used. They may differ in configuration and number of cutting blades. Some cutters resemble round ones circular saws– installing them on powerful lawn mowers allows you to fight young trees.

Some cutters are designed specifically for mowing grass for harvesting purposes - they, unlike the same cord, do not crumble the grass, but ensure its even cut.

Amateur use of knives is unacceptable. Manufacturers of lawn mowers indicate the possibility of using one or another type of cutting tool. Failure to follow the recommendations may result in trimmer failure.

  • Available for sale and special nozzles, significantly expanding the functionality of the brush cutter. They can be included in the kit or purchased separately, as needed, but in any case, the possibility of their use must be specified by the manufacturer.

Thus, on a gasoline scythe with a collapsible rod, instead of a conventional cutting unit, a brush cutter, a small chain Saw for cutting tree branches, brushes for cleaning paths from dirt or for removing snow, and even various cultivators for surface tillage.

Which brand to prefer

The variety of models on sale can confuse the inexperienced buyer. Which lawn mower should you prefer with equal performance indicators?

Of course, it is necessary to focus on the reputation of the manufacturer, the warranty period it provides for the tool, as well as how developed the service network for models of a particular brand is in the region of residence, for which specific technical support can be counted in case of unforeseen breakdowns.

Recognized leaders in the production of such tools are the companies Husqvarna, Makita, Stihl, Oleo-MAC, ECHO - the brush cutters of these brands, although they cost a lot, fully comply with quality standards. The equipment produced by Hitachi, Patriot, Caiman, Huter, and Hyundai deserves only positive assessments. If you don’t want to spend extra money just for a brand, then it is quite possible to purchase a fairly high-quality and relatively inexpensive tool from Chinese brands or assembly - Intertool, Rostec, Sadko. Domestic gasoline scythes, such as Kedr or Izhmash, have also earned a good reputation.

In any case, you should purchase the tool only in specialized stores, where you can read the terms of the warranty and make a note about the date and place of purchase. Unfortunately, the market for instruments of this class is literally teeming with low-quality fakes, and the likelihood of purchasing such a “gift” on a spontaneous market or at hand that will quickly fail is extremely high.

Model nameIllustrationBrief description of the modelAverage price level
Husqvarna 323 A modern brush cutter equipped with a restart system directly from the control handle.
Power 0.9 kW. The engine is two-stroke.
The gas tank is transparent, 0.5 l.
Rigid drive shaft, non-separable rod.
“Bicycle” handle, double-shoulder “Duo Balance” harness.
Weight - only 4.5 kg.
Attachments – a trimmer head (spool) with a 2.4 mm fishing line, and a 4-blade disk for mowing grass.		25,000 rub.
Husqvarna 122C A relatively inexpensive household-grade brush cutter.
Two-stroke gasoline engine with a power of 0.6 kW.
D-shaped handle on a curved, non-removable rod with a flexible drive.
The cutting tool is only a trimmer head for 2÷2.4 mm fishing line.
Easy engine starting system.
The mass of the scythe is 4.2 kg.		11,500 rub.
"CARVER GBC-31FS" A Russian-designed and Chinese-assembled model with a compact four-stroke engine with low noise levels.
Power – 1 kW.
“Bicycle” handle, straight bar with one collapsible connecting unit. Hard drive.
Working tool – trimmer head for fishing line 2.4 mm and circular knife(48 teeth).
The mass of the scythe is 7.6 kg.		9,000 rub.
"ECHO GT-22GES" Products of a famous Japanese company.
A household-grade model for caring for local areas.
Two-stroke gasoline engine with a power of 0.67 kW.
Curved rod with flexible drive, non-removable.
The mass of the scythe is 3.8 kg.
Trimmer head with semi-automatic line feed with a diameter of up to 3 mm.
D-shaped handle.
Electronic ignition and easy start system.		11,300 rub.
"Makita EM2600U" Petrol mower with a two-stroke engine with a power of 0.83 kW.
Straight, non-separable rod with a rigid drive supported by high-strength bearings.
The cutting tool is a trimmer head (line up to 3 mm) and a four-bladed knife.
“Bicycle” handle with rubberized comfortable handles to reduce vibration levels.
Easy start system.
The weight of the assembled scythe is 5 kg.		16,000 rub.
"Huter GGT-800T" Inexpensive, high-quality, German-assembled household-grade model.
The power of the two-stroke engine is 0.8 kW.
Straight, non-separable rod with a flexible drive inside.
Trimmer weight – 7.1 kg.
The cutting attachment is a trimmer head for 2 mm fishing line and a three-bladed knife.		6,800 rub.
"Caliber BK-1000" Motor-cutter, Russian design, Chinese assembly.
1 kW two-stroke engine.
The rod is straight, with a flexible drive, dismountable.
"Bicycle" handle, shoulder strap.
The weight of the assembled product is 6 kg.
Cutting attachments – trimmer head and three-bladed knife. The diameter of cut plants is up to 13 mm.		5,900 rub.
"Kedr BG-3700" A domestically produced professional class brush cutter, characterized by increased engine power (3.7 kW) and low price.
Straight rod, rigid solid shaft.
"Bicycle" handle.
Weight 9.8 kg.
It is equipped with a trimmer head and three knives – 2 and 3 blades and 40 teeth.
Designed for a wide range of applications		from 7,500 rub.

Prices for popular gasoline trimmers

And in conclusion, useful video information about assembling the lawn mower, preparing it for work and starting the tool for the first time.

Video: How to prepare a purchased gas scythe for work

When choosing the right brush cutter for quick and, most importantly, effective cleaning of the area from unnecessary vegetation, you need to decide on some indicators. gained popularity in agriculture, in the public utilities sector. A convenient and mobile unit is suitable for periodic, seasonal work on personal plot. With its help, they get rid of tall grass, woody weeds, and bushes. Three types of lawn mowers are considered: professional, semi-professional and household. A professional unit is used for making hay and tidying up the area. Semi-professional devices are in demand by representatives of various professions: designers, professional gardeners, landscape designers. The household device is most often used on summer cottages, where you need to treat flower beds and lawns, clear paths and cut weeds along fences and houses. The design for all lawn mowers is the same: a rod with an engine and a mowing head attached to it. We have collected 10 important points that will help you easily choose a lawn mower.

1. Two-stroke or four-stroke engine?
4-stroke internal combustion engines require operation with gasoline and oil. Moreover, gasoline is in one tank, oil is in the crankcase. Such models are distinguished not only by higher cost, but also by a longer working life, increased reliability and a fairly large weight. Among the advantages, their reduced vibration and low sound pressure level are noted. 4-stroke drives are designed for lower gasoline consumption, which indicates their efficiency.
For this, a mixture of gasoline and oil is pre-prepared. Oil for lubricating the necessary mechanisms, in this case, is used from the resulting mixture. It must be taken into account that the mixture cannot be stored for a long time, so during long breaks it must be drained. Among the advantages of a 2-stroke engine, it should be noted that it is small in size and light in weight, which must be taken into account when determining who will work with the equipment.
Both units are characterized by increased productivity. In terms of durability, the 4-stroke engine takes the cake. Both types of engines require special maintenance, fuel preparation, oil filling, that is, careful attention. The user can work early in the morning, when the grass is not yet dry from dew, and after rain, when the grass is still wet. The mobility of the device expands the capabilities of the owner. The operator can go as far from home as he likes. Refueling with fuel and oil can be done directly at the workplace.


2. How much power is enough?
High engine power hand tools has an additional advantage for professional units, as productivity increases. For a household unit, high power results in unnecessary expenses due to increased fuel and oil consumption. Increased vibration for the operator threatens greater effort during work, and therefore greater fatigue. The greater weight of powerful devices, again, creates additional physical stress on the user’s muscles. An engine power of 1 kW is enough to work on a standard plot of 5-10 acres.
Professional devices have engine power from 1.8 hp; some models are equipped with an automatic system that regulates power, increasing it in difficult areas and decreasing it in open areas.

3. The number of revolutions of the cutting system is VERY IMPORTANT!
The optimal combination of engine power and its maximum number of revolutions is the main indicator when choosing a lawn mower. In modern systems, there is a special mechanism that allows the scythe to adjust to the desired mode, and the unit selects the required number of revolutions of the cutting tool, almost instantly. A higher rotation speed of the cutting units results in a cleaner cut that does not damage plant stems and is a better guarantee of healthy grass growth.


4. Fishing line, metal knife or disc?
The complete set of a mobile tool, as a rule, consists of a fishing line, a metal knife and/or a disk. The operator selects a cutting tool for the type of vegetation he will have to deal with. The line is able to cope with tall grass, shows better results in open space, and can be automatic or semi-automatic. The line is fed to the required length automatically. Or the length of the fishing line increases automatically, and a stationary knife cuts it to the required length. Available manual option line feed. The thickness of the fishing line depends on the engine power. The more powerful the engine, the thicker the fishing line you can work with. For powerful units, the line can be more than 2.4 mm thick, which is very convenient for working with coarse grass. Brush cutters with a knife are used for thicker stems and trimming bushes. 2, 3 and 4 tooth knives are suitable for household use. An 8-tooth knife is used for mowing weaving grass and for making hay. Multi-tooth discs are most often used in professional tools. With such a cutting disc, the operator can cope with small trees, with a trunk thickness of up to 4 cm, as well as with tough thickets of bushes. The inner diameter of the discs can be 25.4 mm or 20 mm. Outside diameter ranges from 200 to 300 mm. The disc thickness used is either 0.8 mm or 2.0 mm. All cutting units are covered with a special protective casing, which protects the operator from flying grass residues and pieces of stems.

5. The belt is responsible for the load on the arms and back
To hold the tool in your hands while working, shoulder straps are used. The weight of professional lawn mowers reaches 7 kg. If the load is correctly distributed on the user's shoulders and back, then he gets tired less and the work itself is more comfortable. The straps can be worn over the shoulder - this is one option; one side of the user is involved. The second, more preferable, backpack vest. With its help, the weight is evenly distributed on both sides. As a result, the operating time increases. Physical stress on the muscles decreases. When performing a large amount of work, you should choose the latter type of weight distribution of the manual apparatus.


6. Which handle shape is more convenient?
Manufacturers offer several options for handles of the compact unit. The D-shaped handle is perfect for occasional work. During operation, the operator holds the handle with one hand and holds the rod near the engine with the other.
The U-shaped handle, better known as a bicycle handle, is shaped like a bicycle handlebar, hence the name. During operation, the operator holds the tool with both hands, while he captures a larger radius, hence better productivity. Moreover, the user can set the cutting unit to different levels and process vegetation of different heights. The U-shaped handle is considered the most comfortable and in demand among both professionals and amateurs.

7. What influences the shape of the barbell?
Types of rods The curved rod contains a flexible shaft inside itself, which has the appearance of a cable. The flexible design perfectly absorbs unexpected impacts of the knife on a stone or other hard object, which guarantees protection of the gearbox from damage. A curved rod makes it easier to reach plants under benches, between trees, and flower beds.
A straight rod contains a metal pin (rigid shaft) inside it. Such a shaft rotates without friction on bearings, withstands severe loads, does not deform, and copes with dense growth.

8. Collapsible or solid shaft?
Convenience means more comfortable transportation. I disassembled it and put it in the trunk or put it in storage until the next use. The tool takes less space. There is an opinion that over time the collapsible shaft causes more play, a gap between the two structures. But modern manufacturers reject this opinion. High-quality connections do not become loose over time, and they provide greater convenience during storage. Moreover, assembling the tool is quick and easy; assembly takes only a couple of minutes.

A straight barbell is more difficult to transport. Inside the straight pipe there is a shaft that transmits torque to the cutting unit. The design completely prevents foreign particles, dust and dirt from getting inside, which prolongs the safe operation of the device.

9. The lighter the weight, the more comfortable it is.
The weight of the tool determines the amount of time that should be spent on work. The dependence is simple: the more powerful the tool, the more it weighs. An average power scythe weighs from 6.5 to 7 kg. Heavy brush cutters weigh from 8 kg, light ones - in the range from 4 to 5 kg. A lightweight tool means mobility and less fatigue.

To lighten the design, modern manufacturers use aluminum (instead of steel), which, with maximum structural rigidity, provides minimal weight, which means greater comfort. Steel structure- this is a more common material; it makes the instrument heavier, although it costs much less.

10. Brand, warranty period, service
Brand reliability is an important issue when choosing a brush cutter. Well-known brands, for example, Al-ko, Stiga, Oleo-MAC, Husqvarna provide a long warranty period, are responsible for the quality of their products, and ensure high environmental friendliness in accordance with generally accepted international standards. Trade marks Cheaper instruments tend to come from the Baltics or Ukraine, from manufacturers such as Vitals and Centaur. At the moment, they can also boast of decent build quality and expanded networks of service centers in Ukraine.