Gas heat gun for heating, construction and repair. Heat gas gun Low pressure gas gun

Air heating The good thing is that it does not require installation. One of popular options for utility and industrial premises - a gas heat gun. This device quickly warms up the air, however, it cools down just as quickly when the gun is turned off.

Device

This heating device is called a cannon for a reason: it is a cylinder on a support; more massive models have wheels for easier movement. Compact models are equipped with a special carrying handle. During operation, the case heats up to significant temperatures, so you shouldn’t touch it.

Device of direct heating gas guns

There is a fan in a cylindrical casing, followed by a burner behind it (closer to the “exit”). Air is sucked in from the back of the housing, passes through the fan, blowing the burner. Gas is supplied to the burner, which is ignited by ignition. The gas is mixed with the air flow, which promotes more complete combustion.

Gas heat gun good quality designed so that even at the highest power the flame does not extend beyond the body. There should be only a stream of hot air at the outlet. As you can see, the device is not too complicated and the principle of operation is simple. The design is complemented by filters - air and fuel, various sensors and safety devices.

Indirectly heated gas guns

The main disadvantage of the above design is that combustion products remain in the room. It is clear that this has a negative impact on well-being and, as a result, on overall health. But this option has a very high efficiency - 95-98%. Therefore, these are the models that are chosen in production or for temporary use.

There are gas guns without exhaust. More precisely, the exhaust is removed from the room through a pipe. The design of such models is more complex. The combustion chamber is the same cylinder, only it is sealed in relation to the room. In the upper part it has an outlet pipe through which combustion products are removed. Heating occurs due to the fact that the air driven by the fan blows through the combustion chamber, taking away heat from the walls. That’s why these models are called indirect heating heat guns. First, the heat exchanger heats up, and the air from it heats up.

To ensure more complete heat extraction, gas from the combustion chamber moves through a labyrinth. This increases the efficiency, but this figure still does not rise above 80-85%. But such installations do not harm health, they can be used on a long-term basis.

On this moment, the range of indirectly heated gas guns is very scarce, and the prices are high. First of all, these devices are aimed at large production and warehouse premises.

Indirect heating gas gun Ballu JUMBO 200 T LPG. Maximum power - 220.9 kW, price - 512,000 rubles

Advantages and disadvantages

Let us remind you once again: a gas heat gun is not intended for use as permanent heating. It is great for quickly heating up a cold cottage, garage, etc. It performed well when heating buildings under construction. Can be used to speed up the drying of plaster and other mixtures (where technology allows it). But you should not use the unit for constant heating of a residential building.

Now the cons:

• It burns oxygen, so good ventilation is essential.
• Officially, refilling the cylinder is problematic (this is prohibited at gas stations);
• The expense is high.
• If the cylinder is in the cold, it burns poorly.
• Some models are very noisy.
• Electricity is required (for the fan to operate).
• The temperature in front of the nozzle of a working gun is very high.
• With half the gas in the cylinder, problems may begin: it often goes out. But this problem is typical for small-capacity cylinders. When using 50-liter ones everything is fine.

As you can see, this is far from an ideal option. But for quickly bringing rooms from sub-zero to positive temperatures - it’s very good. For example, when you arrive at a dacha that is heated by a stove, do not freeze until it warms up, but turn on the gas heat gun and after 15-20 minutes you can undress. An alternative might be . It is perhaps better for a dacha, but you need to think about the garage and other technical premises.

Power selection

To roughly estimate the required power of heating devices, calculate by area. For a detached building in Middle Zone, requires 1 kW of heat per 10 square meters area. A gas heat gun is not intended for continuous heating. Usually it is taken to quickly warm up a technical room, cottage, garage, etc. Other devices are often used to maintain temperature. For this reason, traditional power calculations by area or volume are not suitable.

The formula for calculating the required power does not change:

• V is the volume of the room (multiply the height, width and length):
• dT is the temperature difference that needs to be ensured (you count the difference between the “starting temperature” from which you will begin to warm the air to the one you want to have in the room);
• Kt - thermal conductivity coefficient of walls, floor and ceiling. At good insulation from 1 to 2; with poor thermal insulation from 3 to 4; with excellent insulation from 0.6 to 1.
• 860 - kilocalories per 1 kW of heat.

It's easy to calculate. Let's give an example. A gas heat gun will heat a garage measuring 5 * 3.5 m, with a ceiling height of 3 m. The walls are one and a half bricks, only insulated metal gates. It is planned to increase the temperature from -10°C to +20°C. Substituting the initial data into the formula, we get:

In total, we found that this room could be heated by a 4.6 kW heat gun. But heating will last at least an hour - that’s how the formula is built. If you want to reduce the time, the power must be increased proportionally. If the time is halved (in 30 minutes), we multiply the power by two; to warm up in a quarter of an hour (15 minutes), the found power must be multiplied by 4:

• 9.2 kW will be warmed up in 30 minutes;
• in 15 minutes - 18.4 kW.

The above calculation is approximate, but it allows you to estimate the required parameters. For those who don’t like to count, there are tables in which everything has already been calculated. But they are given “on average” without taking into account the characteristics of your buildings. You will have to take into account the necessary parameters yourself, choosing from the proposed “fork” of capacities.

Criterias of choice

Power is far from the only parameter that determines the choice. A gas heat gun also has sufficient quantity characteristics that are worth paying attention to.

Protective functions

Open fire and gas are a dangerous combination. In the case of a gas heat gun, there is also the possibility of poisoning carbon monoxide. So additional measures security is not at all superfluous. Here are the protective mechanisms this equipment may have:

• Protection of the electric motor from overheating. The temperature of the fan motor is monitored. When critical values ​​are reached, the gas is shut off. Restarting is possible only after the engine has cooled down.
• Flame control. If there is no flame on the burner, the gas supply valve closes.
• Protection against gas leaks. There is an atmospheric air analyzer. If the CO content is exceeded or the amount of oxygen is insufficient, the equipment is switched off.
• Rollover control. When the position changes, the gas supply is cut off. So, even if the heat gun falls, a fire is unlikely.

The only thing that may raise doubts is air control. Since the sensor is built-in, the state directly near the device is analyzed, which can distort the real data. Therefore, it is better to have a separate detector. Detectors (sensors) are inexpensive and can be programmed.

Performance characteristics

Power is far from the only parameter that characterizes the operation of gas heat guns. There are a few more that are simply necessary to understand how efficiently the unit will work.

As you can see, there are quite a few options. Not all are obvious, some can be missed, but in general, pay attention to them.

Ease of use

Despite the fact that outwardly one heat gas gun is practically no different from another, some are convenient to use, others are not. This can be tracked using the following criteria.

Once again, we draw your attention to the fact that a gas heat gun is intended for rooms in which people are not constantly present. With sufficient power, it will very quickly heat the air even in a frozen room. But after turning it off, it cools down just as quickly: only the air heated up, and not the walls and other enclosing structures. However, as a means of rapid heating, it is very effective (although it consumes a lot of fuel).

Manufacturers

The hardest part when buying is not choosing power or characteristics. This is, of course, important, but more important is the quality of the equipment. And it often depends on the manufacturer. Gas guns are no exception. Few people would agree to spend too much money on this equipment—the option is temporary. Usually they choose according to the price/quality criterion. “Half-Chinese” fit this category. These are those whose management is located in Europe-America, and production in China. Russian gas guns are in approximately the same category. Here is a list of popular brands:

It cannot be said that all models from the manufacturers listed above are successful. There are some that are very good, but there are some that are just so-so.

Popular models of gas guns

When choosing a gas gun both for heating rooms and for installation suspended ceilings, you should rely on reviews from real owners. Let's look at the most popular models of different capacities.

RESANTA TGP-10000 (10 kW)

Gas gun RESANTA TGP-10000

Specifications

• Operating principle: gas
• Heating area: 100 m²
• Maximum air exchange: 320 m³/hour
• Control: mechanical
• Voltage: 220/230 V
• Fuel consumption (l): 1.5 l/h
• Fuel consumption (kg): 0.73 kg/h
• Gas type: liquefied/natural
• Burner included: yes
• Ignition system: piezo ignition
• Power adjustment: yes
• Ventilation without heating: yes
• Handle for moving: yes
• Dimensions: 52x34x22 cm
• Weight: 5.82 kg
• Additional information: piezo ignition

Ballu BHG-10 (10 kW)

Specifications

• Operating principle: gas
• Heating type: direct
• Max. heating power: 10 kW
• Control: mechanical
• Voltage: 220/230 V
• Power consumption: 32 W
• Fuel consumption (kg): 0.8 kg/h
• Gas type: liquefied
• Ignition system: piezo ignition
• Protective functions: overheat shutdown
• Power adjustment: yes
• Handle for moving: yes
• Dimensions: 19x29x44.5 cm
• Weight: 5.3 kg

Master BLP 17 M (16 kW)

Gas gun Master BLP 17 M

Specifications

• Operating principle: gas
• Heating type: direct
• Max. heating power: 16 kW
• Maximum air exchange: 300 m³/hour
• Control: mechanical
• Voltage: 220/230 V
• Power consumption: 53 W
• Fuel consumption (kg): 1.16 kg/h
• Gas type: liquefied
• Burner included: yes
• Ignition system: piezo ignition
• Protective functions: overheat shutdown
• Power adjustment: yes
• Handle for moving: yes
• Dimensions: 47.1×29.3×18.8 cm
• Weight: 4.5 kg

Ballu BHG-20 (17 kW)

Specifications

• Operating principle: gas
• Heating type: direct
• Max. heating power: 17 kW
• Maximum air exchange: 270 m³/hour
• Control: mechanical
• Voltage: 220/230 V
• Power consumption: 40 W
• Fuel consumption (kg): 1.45 kg/h
• Gas type: liquefied
• Ignition system: piezo ignition
• Protective functions: overheat shutdown
• Power adjustment: yes
• Handle for moving: yes
• Dimensions: 19x29x44.5 cm
• Weight: 5.4 kg

Video review from the owner about using Ballu BHG-20 to heat a garage.

RESANTA TGP-30000 (30 kW)

Specifications

• Operating principle: gas
• Max. heating power: 30 kW
• Heating area: 300 m²
• Control: mechanical
• Voltage: 220/230 V
• Fuel consumption (kg): 2.4 kg/h
• Gas type: liquefied/natural
• Burner included: yes
• Ignition system: piezo ignition
• Protective functions: overheat shutdown
• Power adjustment: yes
• Ventilation without heating: yes
• Switch with indicator light: yes
• Handle for moving: yes
• Dimensions: 62x31x25 cm
• Weight: 9.2 kg

Ballu BHG-40 (33 kW)

Specifications

• Operating principle: gas
• Heating type: direct
• Max. heating power: 33 kW
• Maximum air exchange: 720 m³/hour
• Control: mechanical
• Voltage: 220/230 V
• Power consumption: 53 W
• Fuel consumption (kg): 2.7 kg/h
• Gas type: liquefied
• Ignition system: piezo ignition
• Protective functions: overheat shutdown
• Power adjustment: yes
• Handle for moving: no
• Dimensions: 22×33.5×59.5 cm
• Weight: 8.3 kg

Ballu BHG-60 (53 kW)

Gas gun Ballu BHG-60

Specifications

• Operating principle: gas
• Heating type: direct
• Max. heating power: 53 kW
• Maximum air exchange: 1000 m³/hour
• Control: mechanical
• Voltage: 220/230 V
• Power consumption: 105 W
• Fuel consumption (kg): 4.4 kg/h
• Gas type: liquefied
• Ignition system: piezo ignition
• Protective functions: overheat shutdown
• Power adjustment: yes
• Handle for moving: yes
• Dimensions: 27×41.5×71 cm
• Weight: 11.7 kg

Ballu BHG-85 (75 kW)

Gas gun Ballu BHG-85

Specifications

• Operating principle: gas
• Heating type: direct
• Max. heating power: 75 kW
• Maximum air exchange: 2000 m³/hour
• Control: mechanical
• Voltage: 220/230 V
• Power consumption: 220 W
• Fuel consumption (kg): 6.2 kg/h
• Gas type: liquefied
• Ignition system: piezo ignition
• Protective functions: overheat shutdown
• Power adjustment: yes
• Handle for moving: yes
• Dimensions: 27×41.5×81 cm
• Weight: 14.1 kg

Guns for suspended ceilings

Despite the fact that when installing suspended ceilings it is safer to use electric heat guns, they are more popular gas models direct heating. This is due to the fact that gas guns have higher power and efficiency.

As a rule, professional “ceiling artists” have in their arsenal guns of different powers - for different ceiling areas. If we're talking about For rooms up to 20 m², a heat gun with a power of about 15 kW is sufficient. For example, Master BLP 17 M (16 kW) and Ballu BHG-20 (17 kW) are suitable. In small spaces it is more convenient to work with compact guns. As for safety, many experts recommend using composite cylinders.

If a more universal option is required, then a direct-heating gas gun with a power of 30-50 kW would be optimal. For example, RESANTA TGP-30000 (30 kW) or Master BLP 33 M (33 kW).

Products of this class are used as permanent or temporary sources of heating - it all depends on the state of the thermal insulation of the room. In practice, this is an ordinary fan heater, only with a high degree of efficiency and unique functionality. Natural gas heat guns are used for high-quality and economical heating of greenhouses and greenhouses where flowers and vegetables are grown: during operation, they do not emit combustion products, unlike guns running on diesel fuel, and are also more economical than their electric counterparts.

The operating principle of this class of units is no different from other heat guns: the combustion chamber housing is cooled by air pumped by a fan. Then warm air sent to heat the room. Gas heat guns differ structurally from their electric counterparts only in the presence of a burner instead of heating element(TEN).

The gas ignites automatically using a piezoelectric element. This device can be used both for residential premises and for heating production facilities. For example, a high-performance gas heat gun with a power of 10 kW can heat a room in a new house with an area of ​​150-300 square meters. m. or a greenhouse up to 70 m 2. If the gun has a power 10 times greater, then it is capable of efficiently heating a building with an area of ​​​​about 3.3 thousand square meters. m or greenhouse farming

- 740 m2. One cylinder of propane gas is enough for approximately 60 hours of operation without stopping, and it must be taken into account that the fan heater turns off automatically when the set temperature in the room is reached, and then turns on if the temperature drops. For battery life

The product is connected to a gas cylinder with liquefied natural gas, which can be easily replaced as used.

A compact heat gun, capable of running on natural gas, consumes only no more than 1 l/h to heat a living space.

Gas-fired heat guns are divided into two main classes:

• direct air flow heating products;
• indirect heating units.

In the first case, when heating the air flow is used open fire, in which propane gas burns, the combustion products enter the heated room, but the efficiency also reaches a maximum when using this design. The dimensions of such a device are quite compact, the cost is very low, but ventilation is necessary for a constant flow of fresh air. Great fire hazard - not a single inspector will sign an act authorizing the use of this device for residential premises.

The second option is more preferable, because the combustion chamber in the unit closed type , all combustion products are discharged through a special pipe connected to the chimney pipe. It is better to install such products outdoors, and blow warm air through a special system with a sleeve large diameter from non-flammable material.

Modern gas heat guns, which carry out indirect heating of the air flow, operate on propane, which burns without residue, and the removal of combustion products is no longer necessary. Only their dimensions are larger than direct heating devices, and the price is correspondingly higher.

Application requirements

The operation of a gas-powered product, regardless of design features, requires a constant flow of oxygen from the ambient air for stable combustion.

When the user chooses a model, these features must be taken into account.

The pricing policy depends on the size, power and brand: the more difficult the working conditions, the larger the volume of heated areas, the more expensive a gas fuel heat gun will cost. The room where the unit is planned to be located must have excellent ventilation so that there is a constant flow of fresh air from outside. If there is no ventilation, then you need to choose a model with a thermostat that automatically turns the gun off or on, maintaining a sufficient level of oxygen. Equipment thermostat allows you to increase the efficiency of the product: when you reach optimal temperature

it turns off the fan heater, turning it on only when the set temperature drops to a certain level. Products of this class are used in production, in warehouses, in the construction of buildings and for heating agricultural facilities, where people are not constantly present.

Gas heat gun with thermostat

Unit selection All gas products has a very high operating efficiency, the fact of environmental cleanliness is also important - the burned gas does not pollute the atmosphere, there are no foreign odors, which is very important for farmers involved in growing flowers and growing vegetables.

How to choose a gas-powered fan heater from the wide range of models presented? To successfully make a choice, you need to learn more about the blue fuel used, the specific features of thermal units and their design.

1. It should be taken into account that similar heaters operate successfully from highways or from connected to a gas heat gun balloon. The efficiency of such a device becomes almost 100%.
2. To purchase the right product with effective performance, you need to calculate in advance how much power the unit requires. Are being done room measurements: you need to know its volume. You should also check the quality of the thermal insulation to see if there are any leaks. The higher the performance of a heat gun, the faster it will heat the room to the desired temperature.
3. Please also pay attention to gas consumption, to know approximately how long the gun will work without the first shutdown.

All gas fan heaters have a similar operating scheme; we have already discussed in detail how it works a little earlier. It is necessary to note the fact that many people do not need to connect to the network because piezoelectric element can ignite gas without electricity.

TPG-10 kW for 7 thousand rubles is considered by specialists the best option for places where there is no electricity connection nearby:

• runs on propane and butane;
• productivity - 300 m 3 / h;
• temperature up to + 90 C°;
• gas consumption max - 0.76 kg/h;
• weight - 5.5 kg.

This gas heat gun can be used from a gas main or with a connected cylinder, in places where there is a network connection and without electricity. The Sturm GH91101 10 kW product has similar advantages; at a flow rate of 0.75 kg/h, productivity is up to 330 m 3 /h, and the cost is only 5,590 rubles.

Experts strongly advise users to repair gas heat guns only in special centers where there are specialists in gas equipment, in order to avoid causing irreparable damage during independent maintenance.

Popular models

There are many models of gas guns on the modern Russian market: Master, Ballu and many others, but we will consider only the most popular ones.

Compact gun with a power of 10 kW, its operating speed is up to 300 cubic meters/h, and its consumption is more than modest - 0.75 kg/h. The connection is single-phase, the installation weight is only 4 kg, it uses liquefied propane, costs from 4.7 thousand rubles.

This model has a capacity of 1450m 3 /h. Her power with small dimensions it is impressive - 5300 W, and gas consumption - 3780 g/h. Therefore, its price is much higher - 10 thousand rubles. It is used for heating large shopping centers, supermarkets and industrial premises: repair shops, factories and workshops.

Ballu BHG-20 S

This is a representative of the middle class in the price category, can work for propane and butane, heating speed - 500 cubic meters. m/hour, gas consumption - 1.2 kg/h, power - 18 kW, weight - 4.9 kg, and price from 5 thousand rubles.

All of the above models use a piezoelectric element to ignite the gas and are among the 10 most purchased models. Master is a US brand, but the country of origin today is Italy, and Ballu is a domestic development. For clarity, I advise you to watch a video about functionality Ballu:

Connection and operation

Before turning on the device, you need to read the instructions, where all the nuances of connection and use are described very clearly. Particular attention must be paid to situations where you can't turn on the device:

• with increased dust content in the air mass of the room;
• if there are vapors of explosive substances;
• the exit hole is blocked by something.

Operating rules and safety measures may vary among manufacturers of different models - study the attached documentation before starting work.

Gas heat guns are very economical compact products, characterized by a high volume heating rate and efficiency, which is why they are considered specialists gas equipment ideal option for heating various large areas. I would like to note that Russian heat guns technical specifications They are not inferior to foreign brands, and their design is almost identical, so there is no point in overpaying.

Heat guns are perfect for heating non-residential buildings. However, often such premises do not have electricity supply. In such situations, an autonomous heat gun can help; it can function without being connected to an electrical network.

Types of units

An autonomous heat gun without electricity is most often represented by liquid fuel devices. They are able to work for various types liquid fuel: diesel fuel, kerosene or waste oil.

It should be noted that autonomous heat guns without electricity, operating on liquid fuel, can have the principle of direct or indirect heating. The former emit fuel combustion products directly into the heated room. Therefore the latter must have effective system ventilation.

Autonomous indirect heating heat guns have a more progressive design, which includes an outlet pipe for exhaust gases. As a result, such devices are quite suitable for rooms with people.

Advantages of independent type heaters

It should be noted that liquid fuel devices have safety systems, including:

Overheating protection;

A system that controls the burner flame, which allows the gun to turn off automatically when the flame goes out.

Autonomous heat guns without electricity also include gas heat guns. The most autonomous devices are those that can operate on bottled gas. After all, they can be moved indoors or transferred to another building. Such devices also have a burner, which, unlike liquid fuel devices, runs on gas.

As you can see, autonomous type heat guns are perfect for rooms without power supply. They are safe, effective and quite economical.

Having built a house, what does a person first of all start to think about?

Absolutely right! You correctly assumed that every person always dreams that his home will always be cozy and comfortable.

Such an idyll is achieved only thanks to warmth! Therefore, every home owner, first of all, always tries to install an optimal heating system for his home.

But here's the problem! Severe frosts hit, and the heating system does not heat the room quickly enough to the required temperature. What then should be done in this case? There is only one alternative: go and buy a multifunctional unit called gas.

But not everyone knows what a gas heat gun is. In this article we will try to talk in detail about this type of heating units, as well as in which areas of life the use of gas-powered heat guns will be effective.

What is

A unit that generates warm air flow based on gas combustion is called a gas heat gun.

The design of the heat gun consists of the following important elements:

It is also worth noting that all these components are housed in a reliable metal case. This material for the housing was chosen based on the fact that during operation of the unit a lot of heat is generated, in other words, the housing gets quite hot.

How does it work

To understand how a gas heat gun functions, you need to pay attention to the following important points:

What gas is used

To operate a heat gun, as a rule, propane or butane gas is used, which is located in special cylinders.

This, in turn, allows you to use a gas heat gun in any place, since the unit in this form will become a fairly mobile device.

It is also worth noting that the heat gun can be successfully connected to the main gas pipeline using a special hose.

In this case, the unit becomes a full-fledged room heating element, which can easily replace the existing heating system.

Areas of application

1. The most effective is the use of gas heat guns when performing the following production operations: Heating of premises.
2. The use of a heat gun in this case allows you to quickly and efficiently heat a living space, various outbuildings, as well as industrial premises with a large area. Ventilation of premises.
3. If you turn off the gas supply to the unit, the heat gun will become a powerful fan, which will greatly promote air circulation in the room. Heating of surfaces and individual objects.

   The point directionality of the air flow of heat guns allows, for example, their effective use when drying newly plastered surfaces. The use of gas heat guns when installing suspended ceilings is also considered indispensable.

Manufacturers

This is due, first of all, to the fact that the ceiling material becomes more plastic when it heats up quickly. Modern market heating equipment

has a fairly wide range of gas heat guns. And, despite the fact that a heat gun is a rather specific piece of equipment, nevertheless, many manufacturers present their own versions of this type of gas equipment.

Today, the most popular brands of heat guns are the following brands:

Equipment rating

Among the above brands, we can highlight the following several models of heat guns, which are confidently the leaders in sales of units of this type. The power of this gas gun model can vary from 3 to 15 kW.

The productivity of the device is 300 m3/h, while the fuel consumption rate is 0.73–1.3 kg/h.

In the heat gun of this model, it is possible to use propane gas, as well as butane.

Neoclima IPG 15. As a rule, this model includes a gas reducer and a hose.

The fuel consumption of the heat gun is 1.4 kg/h.

At the same time, the power is 18 kW, and the productivity is 400 m3.

Fubag. The most popular model of gas heat gun of this trademark is Fubag Brise 15.

The uniqueness of this model lies in the fact that with a productivity of 500 m3, fuel consumption is only 1–1.2 kg/h.

Unit power – 18 kW. The gas heat gun of this model is equipped with a high-quality protection system, as well as a flame control device.

Watch the video in which a specialist explains in detail the design and operating principle of a gas heat gun using the example of choosing equipment for installing suspended ceilings:

Gas heat guns Profteplo KG on natural gas are distinguished by the simplicity of their design and high efficiency during operation. The operation of heat guns on natural gas and the ability to connect directly to the gas pipeline significantly increases the number of places for operating heat generators. Compactness, reliability and stability in operation make it possible to use Profteplo KG air heaters for heating premises for various purposes: industrial and production areas, agricultural facilities. Piezo ignition Protection against overheating Gas divider High efficiency Warranty - 2 years.

Biemmedue GA/N gas suspended air heaters are connected to a natural gas line or to a large propane tank. To operate from a cylinder, an additional hose and reducer are purchased. Air heaters are ideal for heating production and industrial areas. Biemmedue GA/N gas heat guns are mounted in a suspended state; for this purpose, the equipment is supplied with special fasteners. High quality engine assembly, air flow control and a safety system contribute to high performance and stable operation of heat generators. Features: Connector for thermostat, timer, hygrostat, Temporary or permanent ventilation, Control of supply voltage reduction - models GA/N 80, GA/N 100. Warranty - 1 year.

Gas heat guns Euronord NG LE directly heated, operating on natural and bottled gas, except for the NG LE 10 model, which operates only on natural gas. Suspended gas air heaters Euronord NG LE are compact in size, light in weight and high in performance. The efficiency of these heat generators reaches 100%, which is a decisive factor when purchasing for heating and drying construction, agricultural or warehouse premises. The room thermostat and the conversion kit to liquefied gas must be purchased separately! Suspended installation, Automatic ignition system, High efficiency, Operation on natural and liquefied gas, Economical in energy consumption, Warranty - 1 year.

Gas heat guns Pakole LH direct heating with a stainless steel body, which is extremely resistant to corrosion. The guns have three operating modes: ventilation, heating, combined mode. Triple protection system, suspended mounting. Warranty - 2 years.

Gas heat guns Kroll PE direct heating on natural gas / bottled gas

Kroll PE gas heat guns are used for heating industrial premises, warehouses, as well as for drying and heating various products made of wood, concrete, etc. Anti-corrosion housing. Work on natural gas. Germany. 1 year warranty.

Gas wall and ceiling air heaters Robur F1

Gas wall and ceiling air heaters Robur F1 with a multi-gas pre-mix burner made of stainless steel. The heat exchangers of such gas air heaters are made of aluminum alloy and are characterized by high heat transfer. The efficiency of Robur F1 heat generators is more than 91%. Among the features of the series, I would like to emphasize that models with the letter C in the marking are produced with a more powerful fan, which is attached to the heater frame. Such heat generators are distinguished by greater air productivity. The letter C in the marking indicates the presence of a centrifugal fan with higher performance Availability of models for suspended mounting both on the wall and under the ceiling Winter-Summer switch - included The ability to operate units on both main (natural) and bottled (liquefied) gas Switching from one type of gas to another with just one nozzle. Production - Italy. Warranty - 1 year! Thermostats are purchased separately, but! Winter-Summer switch included!

Condensing gas heat generators EOLO VIP AE / AC with axial (AE) and centrifugal (AC) fans are the most economical type of heaters and are characterized by significant savings in gas consumption, as well as the absence of the need to install a steel chimney, due to their operating principle. The principle of condensation allows, during the process of heating a room, the released vapors to collect in the form of water on a primary heat exchanger made of stainless steel and the heat they generate is then returned to the heating system, rather than being discharged along with the exhaust gases outside the room. It is this factor that contributes to the high efficiency and operating efficiency of wall-mounted condensing equipment, as well as up to 20% fuel savings. AE - axial fan, AC - centrifugal fan, VIPA AE models are supplied with automatic equipment, Burner with gas-air pre-mixing, High operating efficiency, Low noise level, Fuel efficiency, Automatic thermal power modulation, Warranty - 1 year .

Two-stage gas air heaters Norgas CPG-HF-2 are available in vertical and horizontal models. Vertical heat generators have the shape and appearance of a column, and horizontal models are convenient for installation and installation, for example, in low rooms or under the ceiling. All models are equipped with automatic ignition and a stainless steel combustion chamber, and models starting from 1250 also have a stainless steel heat exchanger (in other cases the heat exchanger is made of mild steel). Among other things, the units are equipped with the ability to operate simply in ventilation mode. Control system MC 200 - included, Free airflow, Transition to liquefied gas is carried out using special jets, Savings in energy consumption, Warranty - 1 year.

Gas heat generators Teplamos HP indirect heating

Fully automatic gas air heaters Teplamos HP are perfect for heating premises for completely different purposes - warehouses, hangars, garages, workshops, production areas. The presence of an automation system that controls the entire work process, including the operation of the burner, makes it possible to simplify the operation of the heat generator as much as possible, as well as make it as safe as possible. Gas air heaters use natural or liquefied gas, which makes them convenient for operation in any conditions, including in the absence or interruptions of electricity. Overheating protection, Possibility of adjusting heating power, Electronic control unit, Availability of ventilation mode, Automatic maintenance of heating temperature, Chimney and compressor must be purchased separately! Warranty - 1 year.