Compact pressure transmitter MBS 3000, Designed for use in almost all industrial applications, ensures reliable pressure measurement even under harsh conditions environment. A wide range of pressure transducers provides a current output signal of 4-20 mA, absolute or relative pressure measurement, various measuring ranges from 0-1 to 0-600 bar, various options for connecting pressure impulse lines and electrical connections. Excellent vibration resistance, rugged construction, and a high degree of EMC and RFI protection ensure compliance MBS 3000 the most stringent requirements that apply to industrial installations.
Output signal 4 - 20 mA
Operating temperature -40 to 85° C
Measuring range 0 - 600 bar
Standard pressure connection, G 1/4A ISO 228/1
For industrial use under harsh environmental conditions, such as pumps, compressors, pneumatic systems and water treatment plants
Temperature compensation and laser calibration y For hazardous areas class 2.
Operating conditions for MBS3000
Changing the flow rate of the working fluid in hydraulic systems, for example, when quickly closing valves or starting and stopping pumps, can cause cavitation, water hammer and sudden pressure surges. These phenomena can occur both at the inlet and outlet of the sensor, even at relatively low operating pressures.
MBS 3000 operating environment conditions.
The presence of contaminant particles in the working environment can lead to clogging of the nozzle opening. Installing the sensor in a strictly vertical position minimizes the risk of clogging. The viscosity of the working medium does not have a significant effect on the reaction time. Even with viscosities up to 100 cSt, the reaction time will not exceed 4 ms.
Ordering diagram MBS3000
Main modifications of MBS 3000 available for order from our company:
vendor code
Order code
Short description
060G1113
MBS 3000-1011-1AB04
Output: 4-20mA
Start range, bar: 0.0
Range end, bar: 1
Fitting: G 1/4
060G1429
MBS 3000-1211-1AB04
Output: 4-20mA
Start range, bar: 0.0
Range end, bar: 1.6
Fitting: G 1/4
060G1122
MBS 3000-1411-1AB04
Output: 4-20mA
Start range, bar: 0.0
Range end, bar: 2.5
Fitting: G 1/4
060G1123
MBS 3000-1611-1AB04
Output: 4-20mA
Start range, bar: 0.0
Range end, bar: 4
Fitting: G 1/4
060G3812
MBS3000-1615-1AB04
Output: 0-10V
Start range, bar: 0.0
Range end, bar: 4
Fitting: G 1/4
060G1101
MBS 3000-1811-1AB04
Output: 4-20mA
Start range, bar: 0.0
Range end, bar: 6
Fitting: G 1/4
060G1414
MBS3000-1811-1AB08
Output: 4-20mA
Start range, bar: 0.0
Range end, bar: 6
Connection: G 1/2
060G1125
MBS 3000-2011-1AB04
Output: 4-20mA
Start range, bar: 0.0
Range end, bar: 10
Fitting: G 1/4
060G1650
MBS 3000-2015-1AB04
Output: 0-10V
Start range, bar: 0.0
Range end, bar: 10
Fitting: G 1/4
060G1133
MBS 3000-2211-1AB04
Output: 4-20mA
Start range, bar: 0.0
Range end, bar: 16
Fitting: G 1/4
060G3813
MBS3000-2215-1AB04
Pressure sensors for general industrial purposesMBS 3000
The compact pressure sensor type MBS 3000 is designed for use in almost all types of industrial equipment and provides reliable pressure measurement even in the most unfavorable conditions operation. The compact, heavy-duty pressure sensor type MBS 3050 with integrated pressure pulsation damper is designed for use in hydraulic systems with harsh conditions of exposure to the working environment (cavitation, water hammer, sudden pressure surges) and provides reliable pressure measurement even in the most unfavorable operating conditions. A wide, flexible range of pressure sensors provides output signals various types and measurement of absolute and excess (relative) pressure in the ranges from 0 – 1 to 0 – 600 bar. A wide range of process connection and electrical connection options are available. Exceptional vibration resistance, rugged design, high EMC and EMI protection ensure that the pressure sensors meet the most stringent industrial equipment requirements.
Characteristics
For industrial equipment and heavy duty hydraulic systems High resistance to cavitation, water hammer and pressure surges (MBS 3050) The body and parts in contact with the working environment are made of acid-resistant stainless steel (AISI 316L) Relative (gauge) and absolute pressure measurement ranges from 0 to 600 bar Full range of standard output signals: 4 – 20 mA, 0 – 5 V, 1 – 5 V, 1 – 6 V, 0 – 10 V, 1 – 10 V Wide range of process connection and electrical connection options Temperature compensation and laser calibration
Operating and operating conditions for sensors type MBS 3050
terms of Use Changing the flow rate of the working fluid in hydraulic systems, for example, when quickly closing valves or starting and stopping pumps, can cause cavitation, water hammer and sudden pressure surges. These phenomena can occur both at the inlet and outlet of the sensor, even at relatively low operating pressures.
Working environment conditions The presence of contaminant particles in the working environment can lead to clogging of the nozzle opening. Installing the sensor in a strictly vertical position allows minimize the risk of clogging. The viscosity of the working medium does not have a significant effect on the reaction time. Even with viscosities up to 100 cSt, the reaction time will not exceed 4 ms.
Specifications
Measurement uncertainty (including non-linearity, hysteresis and repeatability)
≤ ± 0.5% of measuring range
BFSL non-linearity (max divergence)
≤ ± 0.2% of measuring range
Hysteresis and repeatability
≤ ± 0.1% of measuring range
Influence of temperature on the position of the zero reference point
Effect of temperature on the measuring range
≤ ± 0.1% of measuring range / 10K
Reaction time
At working fluid viscosity
Air and gases (MBS 3050)
Overload pressure (static)
6 times upper limit of measurement (max. 1500 bar)
Fracture pressure
6 times upper limit of measurement (max. 2000 bar)
Lifetime, at pressures 10 – 90% of the upper measurement limit
>10 × 106 cycles
Nom. output signal (with protection from short circuit)
4 – 20 mA
0 – 5, 1 – 5, 1–6 V
0 – 10 V, 1 – 10 V
Supply voltage (U supply), with reverse polarity protection
9 – 32 V
9 – 30 V
15 – 30 V
Current consumption
–
≤ 5 mA
≤ 8 mA
≤ ± 0.1% URL at 10 V
Max. permissible current
28 mA (typical)
–
–
Load resistance (R N) (relative to supply zero)
Rn ≥ 10 kOhm
Rn ≥ 15 kOhm
terms of Use
Sensor operating temperature range
Standard Application
-40 – 85 °C
Working environment temperature range
115 - (0.35 × ambient temperature value)
Ambient temperature range (depending on the type of electrical connection)
Housing protection class (depending on the type of electrical connection)
Mechanical characteristics
Order codes
Pressure transmitters for heavy dutyoperating conditions type MBS 3200
The compact high temperature pressure transmitter MBS 3200 is designed for use in hydraulic systems and in almost all industrial sectors. The converter provides reliable pressure measurement even in harsh environmental conditions. MBS converter 3250 with integrated pulsation damper is designed for use in hydraulic systems with intense influences of the working fluid, such as cavitation, water hammer or pressure surges. The transmitter provides reliable pressure measurement even under harsh environmental conditions. The wide, flexible range of pressure transmitters provides different types of output signals and measurement of absolute and gauge (relative) pressure in the range from 0 - 1 to 0 - 600 bar and a wide choice of process connection and electrical connection options. Robust design, excellent vibration resistance, as well as a high degree of electromagnetic compatibility and electromagnetic protection pressure transmitter emissions ensure compliance with the most stringent requirements that apply to industrial installations.
Advantages
Designed for use in harsh industrial and hydraulic applications.
Operating and ambient temperatures up to 125 °C.
Built-in pulsation damper. Protection against cavitation, water hammer or pressure surges (MBS 3250).
Full range of standard output signals: 4 - 20 mA, 0 - 5 V, 1 - 5 V, 1 - 6 V, 0 - 10 V, 1 - 10 V.
The body and parts in contact with the working environment are made of AISI 316L stainless steel.
Wide range of process connection and electrical connection options.
Temperature compensation, linearized, laser calibrated.
Technicalcharacteristics
Performance characteristics (EN 60770)
Accuracy (including non-linearity, hysteresis and repeatability)
≤ ±0.5% of measuring range
BFSL Nonlinearity (Compliance)
≤ ±0.2% of measuring range
Hysteresis and repeatability
≤ ±0.1% of measuring range
Temperature error range (compensated temperature range)
≤ ±1.0% of measuring range
Liquids with viscosity
Air and gases (MBS 3250)
Overload pressure (static)
6x measuring range (max. 1500 bar)
Fracture pressure
6x measuring range (max. 2000 bar)
Lifetime, at pressures 10 – 90% of the measuring range
> 10×10 6 cycles
Electrical characteristics
Rated output (short circuit protected)
4 – 20 mA
0 – 5, 1 – 5, 1 – 6 V fast. current
0 – 10 V, 1 – 10 V DC current
Supply voltage, reverse polarity protected
9 – 32 V DC current
10 – 30 V DC current
15 – 30 V DC current
Current consumption
–
≤ 5 mA
≤ 8 mA
Influence of supply voltage on measurement error
≤ ±0.1% of measuring range / 10 V
Max. permissible current
28 mA (typical)
–
Output impedance
–
≥ 25 kOhm
R n ≤ (U supply - 9 V) / 0.02 A
Rn ≥ 10 kOhm
Rn ≥ 15 kOhm
terms of Use
Sensor temperature range (depending on gasket material)
