When you're at the dacha on a weekend or vacation, you always want to make your vacation as comfortable as possible. For the most enjoyable pastime, in addition to cozy home, a gazebo is also a great option, especially during the hot seasonal months. can multiply the amazing sensations of relaxing in nature.
Gazebo and profiled pipes covered with corrugated sheeting
A gazebo is traditionally considered a light room, regardless of shape and size, equipped from the inside with a table and benches. One of the main goals is to protect people vacationing in it from the summer heat or precipitation on inclement days.
Most often this open design which is being built in the shade garden trees or in another picturesque place where peace and quiet reign, and the general atmosphere gives a pleasant mood and good rest.
Advantages of corrugated sheets
The construction of such a structure is not difficult and is usually done on its own. can be made from virtually any material, depending on its availability and individual preferences.
An example of a gazebo made of corrugated sheets with a wooden frame One of the most successful options for constructing a gazebo is corrugated sheeting and profiled pipes. A self-made structure made from corrugated sheets will not only have an attractive appearance, but will also gain high level reliability and durability.
If you choose the option of a gazebo made of corrugated sheets, then this material is used to cover the roof. If desired, you can also sheathe walls with it if you plan to build them.
For similar construction summer gazebo Doing it yourself will require the bare minimum of material and a standard set of tools that almost everyone has. In this regard, the financial expenses for the construction of such a gazebo will be very insignificant, especially when compared with the pleasant sensations that vacationers will experience in the new building.
Option for a gazebo made entirely of corrugated sheets The construction process itself, with a proper and responsible approach, will take no more than one or two days.
Types of gazebos
The shape of the future gazebo, which you make with your own hands, can be absolutely any. The most popular designs, as a rule, are:
- square;
- rectangular;
The choice will depend only on the personal preferences of the owner of the summer cottage, and the form itself will not affect the amount of materials and types of tools, nor the timing or construction technology.
Preparation for construction
In order to start building such a wonderful gazebo with your own hands, you need to carry out a number of preparatory work in advance. The first task is preparation necessary materials and tools such as:
Step-by-step instruction for the construction of a gazebo from corrugated sheets 
The amount of material required will depend on the dimensions of the proposed gazebo. The calculation will need to be made on the basis of the project in the form of a detailed drawing, which you can develop yourself. Or - find it already ready-made solution for the construction of a gazebo.
The main thing is to choose the right material, since corrugated sheets differ not only in their color, but also in the type of corrugation. It is also necessary to pay attention to ensuring that the length of the sheet and the roof slope match. This, in turn, will protect against moisture getting inside if it accumulates on the roof or there is heavy precipitation.
Ready-made gazebo frame made of corrugated sheets In addition, if the length of the sheet is shorter than the slope, this will complicate the process somewhat, and it will require a lot of time, since the corrugated sheet will have to be laid in several rows, and not in one.
In addition, when choosing corrugated sheets, you must carefully and seriously study the characteristics of the material. Modern profiled sheets are always made from one material - galvanized steel.
But their shape or thickness may have some differences. Depending on what material is chosen, the durability of the roof and the frequency of repairs that it may need directly depends.
Choosing a place for a gazebo
After purchasing and preparing all the necessary materials and tools, you need to choose the location of the future gazebo. Depending on the purposes for which the building will be used, it can be placed in a shady garden, near a pond, in a green meadow or in close proximity to a living space.
An example of a gazebo with a barbecue covered with corrugated sheets If the summer cottage is surrounded by a fence made of corrugated sheets, the gazebo can be attached directly to it. In this case, the fence will become one of the walls of the building, and the structure itself will successfully and harmoniously fit into the overall design of the site.
The site package includes:
Metal carcass: profile pipe, professional sheet, plastic windows(additional option).
Interior finishing: plastic lining ( or at your discretion), wooden floor.
Additions and changes:
At your request.
Gazebo made of corrugated sheets
It is difficult to imagine a summer cottage without a gazebo, even if it has minimum dimensions. Can be used for manufacturing various materials and each of them has its own characteristics. A gazebo made from corrugated sheets is considered a good decision for a variety of reasons.
First of all, it is necessary to note the low cost of the structure. Installation work requires a standard set of tools and does not involve any additional problems. A gazebo made of corrugated sheets is distinguished by its attractive appearance - it will look good on the exterior of almost any area. The material is characterized by its durability and can serve for many years without loss of quality. Rain, temperature changes or other atmospheric influences do not greatly affect the appearance.
Design Features
A metal gazebo made of corrugated sheets can be of any shape and size. The manufacturing material allows you to create a large number of designs of various types. The most popular are square and rectangular structures. The hexagonal structure looks very attractive. As a rule, built-in benches and a table are already installed inside.
Our company offers to buy a gazebo made of corrugated sheets at affordable prices. The cost directly depends on the size and some additional factors. We offer the opportunity to deliver to the client’s site and carry out assembly. We are distinguished by our professional approach at all stages of cooperation with the customer - from preliminary discussion to installation finished design. A mandatory condition for interaction is the provision of a quality guarantee.
Dimensions: 6000 x 4000 mm;
Height: 3500 mm;
Manufacturer: VISTMASTER, Russia;
It is this material that is most popular when it comes to replacing the roof.
Corrugated sheeting is considered a strong and durable product.
And one more important advantage - the material can fully correspond to the general style of the building.
What should you pay attention to when choosing a material?
In the process of choosing corrugated sheets, you must be guided by several fundamental factors:
- The most suitable material for roofing is the corrugated sheeting that is marked C (wall) and H (load-bearing). The second option is most preferable, since it is characterized by the necessary rigidity.
The best option for roofing is corrugated sheeting with a wave height of at least 20 mm.
- The product must be mandatory accompanied by a certificate.
- You immediately need to select high-quality material. It should not crack or have noticeable flaws or defects.
If you try to bend the corrugated sheet and release it, it should quickly return to its original shape without deformation.
- Its cost will also depend on the thickness of the product. The price is also affected by the presence of a special coating and the purpose of the material itself.
It is best to order the material directly from the manufacturer. In this case, the cost will be lower and there will be fewer defects.
Experts can advise on what additional elements may be needed.
- The thickness of the coating should not be too thin. Most quality materials those that use polyester and plastisol as coatings are considered.
What you need for installation
In order to carry out high-quality installation of the material, you will need to prepare the following materials and tools:
- Fastening elements (nails and screws).
- Sealant.
- Drill.
- Cord.
- Reik.
- Hammer.
- Roulette.
- Mastic.
- Antiseptic.
- Plywood.
- Boards.
- Beam.
- Rafter strips.
- Waterproofing.
- Paint.
- Hacksaw.
You will also need the corrugated sheet itself.
To avoid problems with material shortages, you need to carefully calculate everything.
During transportation and loading, avoid any kinks.
When unloading manually, it is necessary to place one worker for every two meters of the product.
If unloading will take place using special equipment, then preference should be given to soft slings.
Preparing the roof for laying material
It is necessary to carefully approach the issues of waterproofing and ventilation. Vapor barrier is also a very important parameter.
When laying the waterproofing film, it must be taken into account that it should hang 20 mm in a perpendicular position.
This parameter applies to the ramp.
The film should be laid with an overlap of 100 mm.
Rafter strips are installed on the insulating material. 
Steel purlins can only be used if the profile height reaches 40 mm.
It is necessary to attach the sheathing along the planks or purlins.
The step will depend entirely on the choice of material.
At this stage, it is necessary to use timber (50 x 50), a board with a section (32 x 10), as well as plywood (10 mm thick), which has moisture-resistant characteristics.
All wooden parts must be treated with special antiseptics.
Installation of corrugated sheets on a pitched roof
When installing the roof, the following recommendations should be taken into account:
- The material should be fastened using self-tapping screws or nails with special polymer gaskets.
- The sheets should be cut using a high-speed electric saw equipped with carbide blades. Special scissors, a hacksaw and an electric cutter will also work.
Abrasive tools must not be used.
- Installation of roofing on a pitched roof must begin from the bottom corner from any end. The protrusion of the bottom row should reach 35-40 mm.
It is necessary to attach the sheets to the sheathing at the bottom of every second wave.
- When arranging the sides, when sewing up the end boards, you should use a wind corner. This should only be done when the entire row of end sheets is secured.
- Vertical overlap must be done with the product that is located above. The top sheet should overlap the bottom sheet by about 20 cm.
The horizontal overlap should be equal to one wave. When working, you should use a special sealing gasket.
It will not be required if the overlap is equal to two waves, and also if the angle of the slope is 16 degrees or more.
- First, the sheet must be secured to 1 self-tapping screw. Final fastening will be required when all the sheets have been laid and aligned.
The longitudinal connection differs in that the screws are attached to the crest of the wave. In vertical joints, fastening is made at the bottom.
On 1 square meter It should take 4-5 screws.
- Ridge and end strips are attached only when the existing roof area has been completed. There is no need to seal, as there should be gaps left.
They will serve as natural ventilation.
- Connections must be made to the walls of neighboring buildings. After this, the space around chimneys and other communication parts should be equipped.
What you need to know when arranging a gazebo
When laying corrugated sheets on the roof of the gazebo, it is important to take into account some basic rules.
The overlap must be determined depending on the angle of the slope.
If it is less than 14 degrees, then the overlap is 200 mm.
At 15-30 degrees - 150-200mm.
More than 30 degrees - 100-150 mm.
Silicone sealant will be required if the angle of inclination is less than 12 degrees.
First of all, you will need to secure the profile sheet.
This is done from the bottom of the roof.
It is advisable to seal the overlap joints with bitumen.
Sheets should be laid parallel to the cornice. 
The material extending beyond the edges of the building should be 40 mm.
If the length of the product is less than the length of the roof slope, then you will need to use additional row laying along the edge of the roof.
Rules for laying material on a bathhouse
- We lay the corrugated board on the previously created crate. First of all, you will need to secure the cornice strip.
After this, a fishing line is stretched, which will mark the lower edge of the roof. The roofing material will be leveled along it.
It is necessary to fasten the corrugated sheet every two waves. The vertical distance should reach 50 cm.
The overlap is approximately 20 cm. For greater reliability, the joints must be treated with sealant.
- It is necessary to install the planks - end and ridge.
What are the features of installation near valleys, ridges and pipes?
During the installation of corrugated sheeting, you will have to face the problem of designing places near valleys, pipes, and ridges.
When performing work, you need to take into account some recommendations:
- Arrangement of a gutter next to dormer window. In other words, the structure has a short valley.
In this situation, you need to cut the sheet from the bottom of the groove, after which you should get two equal parts. First of all, the bottom sheet is mounted, then the bottom strip.
At the last stage, the roofing sheet is installed.
- An end strip two meters long should be installed. The overlap should be 50-100 mm.
The construction of the roof should begin from the overhang side. You need to head towards the ridge of the roof.
All excess around it will need to be cut off. The end strip in this situation will cover at least one wave of corrugated sheeting.
After this, the plank is mounted to the end board and to the corrugated sheet in the ridge. The step should be equal to one meter.
- We install the ridge strip. Smooth skate elements are used for this purpose.
It is necessary to install seals under the roofing material. The overlap should vary from 100 mm.
The plank is attached using self-tapping screws. The pitch should reach 400 mm.
Absolutely all fastenings must be under the casing. They can also go into the groove.
The ridge seal acts as protection. A longitudinal seal will be required in the case of a lateral connection.
If the slopes are steep enough, then you don’t need to use it.
- Outlet pipes mean the upper and bottom part. By the top one we mean the pipe itself.
The lower one must be selected based on the profile of the roof. It would be optimal to install the snow impeller right away.
The diameter of the pipe should be approximately 100 mm. It will be necessary to insulate the ventilation pipes.
The coating needs to be looked after
Caring for corrugated board does not involve anything complicated.
However, you need to be extremely careful with it, since it is quite easy to damage the material.
The roof must be cleaned at least once every six months.
If there are scratches on the material, you will need to paint the damaged area.
Laying roofing material not very complex.
The main thing is to approach this process with all your responsibility.
The roof must be arranged carefully.
Otherwise, it will have to be changed very soon.
Good luck with arranging your roof with corrugated sheets!
Watch the video on how to cover a roof with corrugated sheeting.
When arranging a gazebo on summer cottage or on the territory of the house, the question arises of choosing and installing a gazebo roof. You should definitely think about what parts it will consist of, what appearance it will have, and prepare Construction Materials. Making a roof for a gazebo is not an easy task, but it is quite doable. Even a person who has never been involved in professional construction before, but has at least some skills and abilities, can undertake its arrangement. Moreover, installing a roof on a gazebo is not so difficult, especially if you choose corrugated sheeting as the roofing - it is light and easy to work with. However, roof installation has its own characteristics. Therefore, if you want to enjoy your roof for many years, follow all instructions for its installation.
A roof made of profiled sheets is an ideal solution for arranging a gazebo
If you want your gazebo to serve not just as a place to relax, but also want it to perform an aesthetic function on your site, you should carefully approach the issue of choosing the type of roof, which differ in shape. Let's look at them.
Possible roof options for gazebos
- For rectangular, square or diamond shaped gazebo in an ideal way the simplest ones will do, pitched roofs . When arranging such a roof, do not forget that the walls that are located on opposite sides must have different heights. In this case, the use of layered rafters is provided. Installing such a roof is quite easy.
- For gazebos with right angles, suitable gable roofs , in this case, the rafters can be used both layered and hanging.
- Rectangular or square structures look good with hipped or hip roofs . When arranging them, two trapezoidal slopes and two triangular ones are used.
- Very unusual and very beautiful looking hip roofs. However, their arrangement is somewhat more complicated than those listed above, because installation involves the arrangement of a ridge unit in which all the triangle slopes will converge.
- A gazebo with a complex design requires arrangement multi-pitched roof.
- Dome roof will decorate a round-shaped gazebo, while the type of roof (helmet or cone) depends on the inclined angle.
When choosing the type of roof for a gazebo, be sure to take into account the fact that it will be under the load of precipitation for a long time (especially in winter period), as well as in resisting winds. Different types roofers cope with these tasks in different ways, so choose the best options.
Preparing corrugated sheets
Types of corrugated sheets
As you know, corrugated sheeting is divided into grades and has different characteristics. What material is ideal for arranging the roof of a gazebo? Firstly, when choosing corrugated sheets, pay attention to how long the slope and sheets are. If these values coincide, you will benefit from reducing the number of transverse joints. If the corrugated sheet is much shorter than the slope, the installation time will increase significantly, and more effort will have to be applied for this.
Corrugated sheeting is made of galvanized steel and coated with polymer. At the same time, the color of corrugated sheeting can be very diverse, so think carefully about what color your future gazebo roof will have.
Also, when purchasing, pay attention to the physical characteristics of corrugated sheeting, because they determine the service life of the material, as well as the frequency of repair work.
Preparatory work
Take care of your safety during work at height, and also ensure that you do not damage it when lifting the corrugated sheet onto the gazebo. Lift materials using special logs, one end of which rests on the ground, and the other is securely attached to the roof. The work must be carried out in calm weather to avoid precipitation.
After delivering the materials upstairs, take control measurements of the corrugated sheeting, try to ensure that the error in them does not amount to more than five millimeters. Preparation for installation of corrugated sheets necessarily includes the installation of hydro- and vapor barriers for the roof. By the way, this should be done even before lifting the material.
Correct fastening of corrugated sheets
Attach the film to the inside of the rafters, be sure to lay it overlapping, and secure the strip sheets with special adhesive tapes. If there are cracks, seal them with sealant. So, first of all, you should lay the vapor barrier material, then the thermal insulation, and lastly, the waterproofing.
Do not forget that installing waterproofing under corrugated sheets is very important point, because if it is done incorrectly, the thermal insulation materials will become too moist. And this will contribute to the fact that the wooden parts of the roof of the gazebo made of corrugated sheets will soon become unusable and rot.
After finishing the work with hydro- and vapor barrier, start arranging the counter-lattice, it is attached to the slings, and consists of 5x5 cm beams and boards. After installing the counter-lattice, treat all wooden parts with an anti-fungal compound. Next comes the time to arrange the sheathing itself. It is made taking into account an interval of 20x40 cm, but it completely depends on the size of the roof slopes. The steeper the slope, the smaller the interval should be.
Installation of profiled sheets
You can attach the corrugated sheeting only after you have completed all of the above. preparatory work. First, the sheet should be attached to the lower edge of the roof. The material overlaps. The sheets are fastened together with special roofing screws with rubber seals. Such seals protect the roof from damage and moisture penetration under it. You only need to screw the screws into the bend of the corrugated sheet. Next, the joints must be treated with bitumen.
The edges of the sheets on the gazebo should hang slightly over the eaves (up to 40 millimeters). To calculate the required amount for the roof of your gazebo, multiply the total roof area by 8. This means that for each square meter of gazebo roof you will need 8 screws, the size of which is 4.8x28 mm.
Tips for those who want to make the roof of a gazebo themselves
In order for the gazebo roof to serve you for many years, when installing it, you must follow a few simple rules.
- Tighten self-tapping screws only with a drill or screwdriver, and the tools must have a minimum speed
- Never use nails when attaching corrugated sheets.
- Do not weld profiled sheets or use gas welding to make holes
- You cannot use a grinder; it, like other abrasive tools, causes the material to heat up, which has a detrimental effect on its coating and can lead to corrosive phenomena on the roof
- To cut corrugated sheets, use metal scissors, cut only longitudinally
- If damage or scratches remain on the corrugated sheet after installation, they should be painted over.
- Three months after installing the roof of the gazebo, strengthen the screws.
The main purpose of the gazebo is relaxation. Therefore, when it comes to design, it is important to take into account all the nuances so that there is no discomfort in the future. To create a gazebo, you can use any material: brick, wood, wrought iron or stone. Functional purpose is an important aspect of designing a recreation area (children's games, active and romantic recreation). If you glaze the gazebo, you can welcome guests in the spring.
A gazebo with a roof made of corrugated board most often has a four-slope design.
An open gazebo is a great option for the warm season. The most common type of open gazebos is wooden; they can be made in the shape of a hexagon or octagon. The roof can be made of two or three tiers, convex and concave, in the shape of a bell. You can use soft bitumen shingles or any modern artificial or natural material. The roof of a gazebo made of corrugated sheets is an inexpensive covering and quick installation.
Corrugated sheeting as a material
The most important thing: the gazebo must meet the taste of the owner and be combined with landscape design garden plot.
Corrugated sheets consist of profiled steel sheets that have a protective layer - polymer or galvanized coating. There is also a material that has a combined coating.
The shape of the gazebo roof can be domed, single-pitched, flat, gable, hipped, eastern and others
Features of corrugated sheeting, in comparison with other roofing materials sheet materials, lies in the fact that the sheets have a formed profile of various configurations and heights. The formation of a profile on the sheets appears during the rolling process. Thanks to the profile, the material gains strength and lateral rigidity. Performance roofing works- the main scope of application of corrugated sheets. Currently, this is the most popular material used for DIY roofing.
The roof of the gazebo can have different shapes:
- Domed. Snow does not stay on this structure.
- Single-pitch. This design is based on external walls gazebos located at different levels.
- The flat roof of the gazebo does not have as beautiful an appearance as it does because it has a slight slope. However, it can be used for landscaping. Today it is very popular.
- The gable consists of flat-shaped triangles that converge at the top point of the central part of the gazebo. The four-slope (hip) includes four slopes: two of which have the shape of a triangle, and the other two are made in the shape of a trapezoid.
- The tent system is often used for polygon-shaped gazebos and square gazebos. The slopes of hipped roofs are represented by isosceles triangles converging at the top point of the central part of the roof.
- Eastern - represents hip structure with raised corners.
Rules for laying roofing with your own hands
First, prepare necessary tools. Depending on the conditions, they may be as follows:
- screwdriver;
- hand saw or chainsaw;
- square;
- level;
- hammer and nails;
- construction thread or a regular piece of any other lacing;
- pencil or marker for making marks.
In progress self-installation It is important to follow some recommendations and rules. The slope of the roof completely determines correct styling corrugated sheets:
- Less than 14 degrees - the size of the horizontal overlap of adjacent sheets must be at least 200 mm.
- From 15-30 degrees - the size of the horizontal overlap of adjacent sheets is 150-200 mm.
- More than 30 degrees - the size of the horizontal overlap is 100-150 mm.
- Less than 12 degrees - in this case it is necessary to use silicone sealant to seal vertical and horizontal overlaps.
Fastening corrugated sheets to the roof
To secure the corrugated sheet to wooden sheathing roofs, you must use special roofing screws.
Scheme of fastening corrugated sheeting to the roof.
They have a drill at the end and a neoprene gasket under the head. Such self-tapping screws can be purchased in various colors, matching the tone of the corrugated sheeting. Using these do-it-yourself self-tapping screws on the roof, fastening must be carried out at the bottom of the corrugated sheeting wave. When installing a roof made of corrugated sheets with your own hands, you need to remember about vapor barrier and waterproofing. Providing space under the roof for ventilation is a necessary condition installation
We choose the roof sheathing for corrugated sheeting. The size and type of sheathing is completely dependent on the height of the corrugated sheet metal and the slope of the roof. However, if the old roofing material is replaced with corrugated sheeting, then the sheathing does not need to be redone.
- when using C20 corrugated sheeting with a roof slope angle of less than 15 degrees, the sheathing is made continuous, the overlap is carried out in 2 waves;
- if the profiled sheets are grade C35, and the angle of inclination is less than 15 degrees, the sheathing pitch should be 30 cm, and the overlap should be one corrugation;
- if profiled sheets of grade C44 or larger are used, then the sheathing pitch will be more than 50 cm;
- The pitch of the sheathing at roof angles greater than 15 degrees should be from 35 to 50 cm, depending on the height of the corrugation of the corrugated sheeting.
Advantages of corrugated sheeting for making a roof with your own hands
- Corrugated sheeting is a lightweight material; it does not require a powerful rafter system roofs. Can be used in construction individually and for industrial buildings.
- Working with corrugated sheeting is quite simple; it can cover any roof and is suitable for any building and structure.
- The material can be used even when organizing a roof that has a slight slope (for example, a garage). It is guaranteed to protect against leaks even in the event of heavy precipitation.
You can work with this material for roofing all year round, using ordinary plumbing tools that any owner has. Sheets of material bend perfectly and are cut to a given size. There is practically no waste left, and even an amateur builder can attach corrugated sheets with his own hands.
A roof made of galvanized corrugated sheets is considered the most economical and durable option do-it-yourself gazebo roofing installations.
